Wide IDP2310UX User manual

Issued Date
Revision Status
Title Page No.
1 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
USER’S MANUAL
IDP2310UX
1600 x 1200 TFT LCD MONITOR
23.1" COLOR DISPLAY
Proprietary Data Notice:
This document as well as all reports, drawings, data, information, or other material, whether accompanying it are the property of
WIDE Corporation, are disclosed by WIDE only in confidence, and, except as WIDE may otherwise permit in writing, are to be
used, disclosed, or copied only to the extent necessary for the evaluation thereof by recipient, or higher-tier contractor or
subcontractor.
Information in this document is subject to change without prior notice.

Issued Date
Revision Status
Title Page No.
2 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
Table of Contents
SAFETY INSTRUCTIONS .................................................................................................................4
FCC INFORMATION..........................................................................................................................5
VCCI...................................................................................................................................................6
BRIEF DESCRIPTION.......................................................................................................................7
GENERAL..........................................................................................................................................7
1. TECHNICAL SPECIFICATIONS ...............................................................................................8
1.1 ELECTRO-OPTICAL SPECIFICATIONS............................................................................8
1.1.1 Screen Specifications .................................................................................................8
1.1.2 Optical Characteristics ...............................................................................................8
1.1.3 Input Signal Specifications.........................................................................................9
1.1.4 Controls of the Display .............................................................................................10
1.1.5 LED Indicator .............................................................................................................10
1.1.6 Power Supply Specification .....................................................................................10
1.1.7 Connectors.................................................................................................................10
1.1.8 Connection & PIN Assignment.................................................................................11
1.2 MECHANICAL SPECIFICATIONS....................................................................................14
1.2.1 Dimension and Weight (Rack Mount ).....................................................................14
1.2.2 Mounting.....................................................................................................................17
1.2.3 Finishing.....................................................................................................................17
1.2.4 Screws/Bolts ..............................................................................................................17
1.2.5 Components...............................................................................................................17
1.2.6 Cooling .......................................................................................................................17
1.3 ENVIRONMENTAL SPECIFICATIONS.............................................................................17
1.3.1 Temperature...............................................................................................................17
1.3.2 Humidity .....................................................................................................................17
1.3.3 Vibration .....................................................................................................................17
1.3.4 Altitude .......................................................................................................................18
1.3.5 EMC.............................................................................................................................18
1.3.6 Safety..........................................................................................................................18
1.3.7 Certificate for ECDIS.................................................................................................18
1.3.8 Drip-proof...................................................................................................................18
1.4 OHTER SPECIFICATIONS................................................................................................18
1.4.1 Reliability....................................................................................................................18
1.4.2 Maintainability............................................................................................................18
1.4.3 Use of toxic materials ...............................................................................................19
1.4.4 Packing.......................................................................................................................19
1.4.5 Buzzer Option. ...........................................................................................................19
2. Communication......................................................................................................................20
2.1 Protocol......................................................................................................................20
2.1.1 ASCII Characters Table.............................................................................................20
2.2.2 Communication Data Format ...................................................................................21
2.2.3 Commadns Table.......................................................................................................22
3 User Controls .........................................................................................................................26
3.1 Operation ..........................................................................................................................26
3.2 USER Control Access......................................................................................................27
3.3 OSD(ON SCREEN DISPLAY) Navigation........................................................................27

Issued Date
Revision Status
Title Page No.
3 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
3.3.1 Adjustment.................................................................................................................28
3.3.2 COLOR ADJ................................................................................................................31
3.3.3 PIP(Picture In Picture)...............................................................................................34
3.3.4 SETUP MENU.............................................................................................................37

Issued Date
Revision Status
Title Page No.
4 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
SAFETY INSTRUCTIONS
Precautions
ON SAFETY
1. Before connecting the AC power cord to monitor, make sure the voltage designation of the monitor
corresponds to the local electrical supply..
2. Never insert anything metallic into the cabinet openings of the monitor; doing so may create the
danger of electric shock..
3. To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open
the case of the monitor.
4. Never use your monitor if the power cord has been damaged. Do not allow anything to rest on the
power cord, and keep the cord away from areas where people can trip over it.
5. Be sure to hold the plug, not the cord, when disconnecting the monitor from an electric socket.
6. Unplug your monitor when it is going to be left unused for an extended period of time.
7. Unplug your monitor fromAC outlet before any service.
8. If your monitor does not operate normally - in particular, if there are any unusual sounds or smell
coming from it – unplug it immediately an authorized dealer or service center.
ON INSTALLATION
1. Openings and fans in the monitor cabinet are provided for ventilation. To prevent overheating, these
openings and fans should not be blocked or covered. Also avoid using the monitor on a bed, sofa rug,
or other soft surface, doing so may block the ventilation openings and fans in the monitor cabinet. If
you put the monitor in the enclosed space, be sure to provide adequate ventilation.
2. Put your monitor in a location with low humidity and minimum of dust.
3. Do not expose the monitor to rain or use it near water. If the monitor, accidentally, get wet, unplug it
and contact an authorized dealer immediately. You can clean the monitor with damp cloth if necessary,
but be sure to unplug the monitor first.
4. Place your monitor on a solid surface and treat it carefully.
5. Locate your monitor near an easily accessibleAC outlet.
6. High temperature can cause problems. Do not use your monitor in direct sunlight and keep it away
from heater, stoves and other sources of heat.
ON CLEANING
The screen is made of thin glass with a plastic surface and can be damaged if dropped, hit and scratched.
CAUTION: DOUBLE POLE / NEUTRAL FUSING.
DISCONNECT POWER BEFORE CHANGING FUSE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Issued Date
Revision Status
Title Page No.
5 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
Do not clean the front panel with keton-type materials(e.g., acetone), ethyl alcohol, toluene, ethyl acid,
methyl or chloride – these may damage the panel.
ON REPACKING
Do not throw away the carton and packing materials. They make an ideal container which to transfer the
unit. If you have any questions about this unit, contact your authorized dealer.
ON DISPOSAL
This unit contains which can pollute the environment if disposed carelessly. Please contact our nearest
representative office or your local environmental office in case of disposal of this unit.
ON VESA MOUNTING
Make sure to unplug before installing this product. Otherwise, it may cause a fire or could give
an electric shock.
Do not install this product by yourself. Contact the qualified service technician. Otherwise, it may
cause injuries.
Do not install this product on the place where it cannot be supported. Otherwise, it may cause
the product to fall and could cause injuries.
Contact the qualified service technician for moving or replacing this product after installing.
Installing the product needs specified technique, so it may cause safety problem to move or
install it by yourself.
Do not hang on or impact on this product. Otherwise, it may cause the product to fall and could
cause injuries.
Do not install this product by alone. Get some help from others. Otherwise, it may cause the
product to fall and could cause injuries.
Do not place a heat source or a humidifier under the installed product. Otherwise, it may cause a
fire or could give an electric shock.
Do not install this product near a high voltage electric line, any power source or the place where
impact or vibration can affect.
Do not install this product barehanded. Otherwise, it may cause injuries.
The screw is not provided to user as default. Use the screw, which can stand the weight of this
product. And, we recommend the machine screw BH(+)M4 x 14mm to 18mm as type.
FCC INFORMATION
USER INSTRUCTIONS
The Federal Communications Commission Radio Frequency Interference Statement includes the
following warning:
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
USER INFROMATION

Issued Date
Revision Status
Title Page No.
6 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
If necessary, consult your dealer or an experienced radio/television technician for additional suggestions.
You may find the booklet called How to identify and Resolve Radio/TV Interference Problems helpful. This
booklet was prepared by the Federal Communications Commission. It is available from the U.S.
Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4.
WARNING User must shielded signal interface cables to maintain FCC compliance for the product.
DECLARATION OF CONFORMITY FOR PRODUCTS MARKED WITH FCC LOGO
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This party responsible for product compliance:
Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be
suitable for connection to any UL Listed personal computer with termination. Before making the
connection, make sure the voltage rating of the computer convenience outlet is the same as the monitor
and that the ampere rating of computer convenience outlet is equal to or exceeds the monitor voltage
rating.
For 120 Volt applications, use only UL Listed detachable power cord with NEMA configuration 5-15P type
(parallel blades) plug cap. For 240 Volt applications use only UL Listed detachable power supply cord
with NEMA configuration 6-15P type (tandem blades) plug cap.
VCCI
この裝置は、情報處理裝置等電波障害自主規制協議會(VCCI)の基準に基づくクラスA情報 この裝置は、情
報處理裝置等電波障害自主規制協議會(VCCI)の基準に基づくクラスA情報技術裝置です。 この裝置を家庭
環境で使用すると電波妨害を引き起こすことがあります。この場合には使用者が適切な對策を 講ずるよ
う要求されることがあります。

Issued Date
Revision Status
Title Page No.
7 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
BRIEF DESCRIPTION
GENERAL
This specification defines the requirements for the IDP2310UX, 23.1” COLOR DISPLAY TFT LCD
monitor with 1600 X 1200 pixels visible resolution, which is designed and tailored for use in operator
display systems such as ECDIS monitor applications.
The IDP2310UX has a 23.1” diagonal viewable display area and 1600 x 1200 pixels addressable
resolution. The (0.098 X RGB) X 0.294 mm dot pitch LCD provides the most accurate and crisp images
on the screen for mission critical applications.
The IDP2310UX provides 16.7 million true colors (8-bit) per pixel. Each pixel is divided into Red, Green
and Blue sub pixels which are arranged in vertical stripes and each sub-pixel is controlled in 256 grey
levels.
KEY FEATURES
Color display 23.1” TFT LCD Monitor
Full 1600 x 1200 resolution
Two Analog (BNC and D-sub) input, single DVI input, CVBS and S-Video.
RS-422, RS-485 and RS-232 Communication
Versatile mechanical version : Rack mount, Desktop Type and VESA Mount Type(if it needs,
firstly contact for us)
Free Voltage AC power : 100 – 264Vac , 47 ~63Hz, 1.0A at 230Vac
INPUT DIAGRAM
BNC and D-sub input connectable to any source compatible to general CRT monitor
Digital input fully compatible to DVI-D Standard of VESA DDWG
Chain of Power just one level through power output totally
CVBS In
BNC In D-sub In
S-Video In
DVI-D In Serial Interface Power Inlet
Power outlet
Power Switch

Issued Date
Revision Status
Title Page No.
8 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
1. TECHNICAL SPECIFICATIONS
1.1 ELECTRO-OPTICAL SPECIFICATIONS
1.1.1 Screen Specifications
1.1.1.1 Panel Technologies
AMLCD (Active Matrix Liquid Crystal Display) technology
Amorphous silicon TFT (Thin Film Transistor) technology
1.1.1.2 Screen Dimensions
Aspect ratio 4:3
Active screen size:
470.4 (H) x352.8 (V) mm (18.52” x 13.89”)
588.0 mm (23.1”) diagonal
1.1.1.3 Display colors
16,777,216 true colors (8-bit), 256 grey scales
1.1.1.4 Resolution
1600 (H) x 1200 (V) pixels
Pixel arrangement: RGB (Red dot, Green dot, Blue dot) Vertical Stripe
Pixel pitch: 0.294 (W) x 0.294 (H) mm
1.1.1.5 Display mode
Normally Black
1.1.2 Optical Characteristics
1.1.2.1 Protective Filter Glass
Clear, tempered glass
Anti Reflective Film and Anti-Static Treatment
1.1.2.2 Luminance (Brightness)
250 cd/m² (max. typical on LCD)
240 cd/m² (max. typical on Protective Filter Glass)
Dimming Ratio: 1000 to 1
White uniformity: 75% max..
1.1.2.3 Contrast ratio
500 : 1 (typical on LCD)
1.1.2.4 Viewing Angle: At the contrast ratio > 10:1
Horizontal: +/- 85(typical)
Vertical: +/- 85(typical)
1.1.2.5 Response time @ 25C ambient
Tr (White Black): 10 ms (typical)
Td (Black White): 20 ms (typical)

Issued Date
Revision Status
Title Page No.
9 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
1.1.3 Input Signal Specifications
IDP2310UX provides maximum five (5) input signal interfaces, 2 x Analog (BNC,D-sub) Input ,1x Digital Input,
1xCVBS input and 1xS-video.
Standard input resolution is UXGA(1600 x 1200 pixels)
Other resolutions are supported as specified below. No scaling is provided for input signals with resolutions
less than the standard input resolution 1600x 1200 pixels.
Resolution Hsync
(KHz) Vsync (Hz)
VGA 640 x 480 31.0 - 43.0 60.0 - 85.0
SVGA 800 x 600 35.0 - 53.7 56.0 - 85.0
XGA 1024 x 768 48.4 - 68.3 60.0 - 85.0
SXGA 1280 x 1024 64.0 – 91.2 60.0 - 85.0
UXGA(analog) 1600 x 1200 75.0 – 93.8 60.0 - 75.0
UXGA(digital) 1600 x 1200 75 60.0
- Specified support resolutions
Resolution H-Frequency (kHz)/(polarity) V-Frequency(Hz)/(polarity)
1600x1200(digital) 75(+) 60(+)
1600x1200(analog)
93.75(+) 75(+)
87.5(+) 70(+)
81.25(+) 65(+)
75(+) 60(+)
1280x1024
91.146(+) 85(+)
79.976(+) 75(+)
63.981(+) 60(+)
1024x768
68.667(+) 85(+)
60.023(+) 75(+)
56.476(-) 70(-)
48.363(-) 60(-)
800x600
53.674(+) 85(+)
46.875(+) 75(+)
48.1(+) 72(+)
37.879(+) 60(+)
35.1(+) 56(+)
640x480
43.269(-) 85(-)
37.5(-) 75(-)
37.7(-) 72(-)
31.469(-) 60(-)
720x400 31.469(-) 70(+)
1.1.3.1 Analog Input
Analog RGB input signal shall be as follows:
Video Signal Level: 0.714 Vp-p nominal
Video Signal Polarity: Positive (Black to White). Polarity is detected automatically.
Both 0 V to +0.714 Vp-p and -0.714 V to 0 Vp-p is allowed.
Video Input Impedance: 75 Ohm terminated (RGB Video Signal)
Sync: TTL voltage levels, External Separate H & V Sync.
Interlace: Non-interlaced
1.1.3.2 Input Selection
In case multiple input source is connected, input to be displayed can be selected by:

Issued Date
Revision Status
Title Page No.
10 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
Manual: Operator can select the input manually using control panel.
1.1.4 Controls of the Display
1.1.4.1 Remote Control via serial ports (JH Communication compatible)
There are serial ports on the back side of the IDP2310UX for remote control of the monitor by customer
application.
RS-422 port: Sub D, 15p, Female (for JH protocol)
RS-232/485 port: Sub D, 9p, Female (for JH protocol)
RS-485 port: Sub D, 9p, male as output (for Inter-Monitor Communication)
1.1.4.2 Control via OSD
Control block with the push buttons is available: Menu, Select, ◀ and ▶ . Settings are selected by the Menu
that guides you through the OSD menu.
Control block also has Volume for dimming brightness.
Control block also has LED indicators, refer to 1.1.5.
1.1.5 LED Indicator
Fault information in available by LED indicators
Normal : Green indicator
Soft Power Off: Amber indicator
No signal : Amber Blinking (every 1 second) indicator
System Fault : Red indicator
1.1.6 Power Supply Specification
1.1.6.1 Voltage range
Standard :100 –264Vac, 47~63Hz,1.0A at 230Vac
1.1.6.2 Power consumption
Normal
Max. (100% Light output)
IDP2310UX 80 W 90W
1.1.6.3 Power variation protection
Unit will not be damaged when Voltage transients remain within value as defined in the applicable voltage
range
1.1.6.4 Over-temperature protection
When the internal temperature gets above than the warning level (65℃), the light output of the backlight is
half. And, LED as red color
When the internal temperature reaches above the critical Value (80℃), the light output of the backlight is
turned off.And, LED as red color
When the internal temperature gets below than the safe level (64℃), the light output of the backlight is
restored.And, LED recovers to green.
1.1.7 Connectors
1.1.7.1 Power connectors

Issued Date
Revision Status
Title Page No.
11 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
Standard: IEC type connector
1.1.7.2 Input signal connectors
Analog Input: 5 Coaxial BNC connectors for R, G, B, HS and VS
Digital input: DVI-D connectors
CVBS input: RCA connectors
S-video input: 4pin mini DIN connectors
1.1.7.3 Interface connectors for remote control
RS-422 port: Sub D, 9p, Female (for JH protocol)
RS-232 or RS-485 port: Sub D, 9p, Female (for JH protocol)
RS-485 port: Sub D, 9p, male (for Inter-Monitor communication)
1.1.8 Connection & PIN Assignment
Power Input / output
Analog Input (BNC)
Analog Input (D-Sub)
●90-264Vac, 47~63Hz with double pole / neutral fusing,
250V F3.15AL
●Disconnect power before changing fuse
●Chain thru power output to limit to one level totally
●R : Analog Red Signal Input (0.7 Vpp, 75 ohm)
●G : Analog Green Signal Input (0.7 Vpp, 75 ohm)
●B : Analog Blue Signal Input (0.7 Vpp, 75 ohm)
●HS : Horizontal Sync Signal Input (TTL)
●VS : Vertical Sync Signal Input (TTL)
●Connection Type : 5 x BNC
●Connection Type : 15p D-aub Female (Analog only support)
1. Red
2. Green
3. Blue
4. Ground
5. DDC Ground
6. Red Ground
7. Green Ground
8. Blue Ground
9. back up
10. sync Ground
11. Ground
12. DDC Data
13. H sync
14. V sync
15. DDC Clock

Issued Date
Revision Status
Title Page No.
12 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
Digital Input
S-Video
CVBS
●Connection Type : 29p DVI-I Female (Digital only support)
1. TMDSData2-
2. TMDS Data 2+
3. TMDS Data 2/4 Shield
4. TMDS Data 4-
5. TMDS Data 4+
6. DDC Clock
7. DDC Data
8. No Connection
9. TMDS Data 1-
10. TMDS Data 1+
11. TMDS Data1/3 Shield
12. TMDS Data 3-
13. TMDS Data 3+
14. +5V power
15. Ground (Return for +5V)
16. Hot Plug Detection
17. TMDS Data 0-
18. TMDS Data 0+
19. TMDS Data 0/5 Shield
20. TMDS Data 5-
21. TMDS Data 5+
22. TMDS Clock Shield
23. TMDS Clock+
24. TMDS Clock-
C1 ~ C5 : No Connection
●Connection Type : 4-pin DIN Jack
1. GND
2. LUMA
3. CROMA
4. GND
●Connection Type : RCA Jack

Issued Date
Revision Status
Title Page No.
13 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
Serial Interface
●Remote In(female)
1. No connection
2. RxD (for RS-232)
3. TxD (for RS-232)
4. TxIN_B (for RS-485)
5. RxIN_B (for RS-485)
6. No connection
7. Ground
8. TxIN_A (for RS-485)
9. RxIN_A (for RS-485)
●Remote out(male)
1. No connection
2. No connection
3. No connection
4. TxOUT_B (for RS-485)
5. RxOUT_B (for RS-485)
6. No connection
7. Ground
8. TxOUT_A(for RS-485)
9. RxOUT_A (for RS-485)

Issued Date
Revision Status
Title Page No.
14 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
1.2 MECHANICAL SPECIFICATIONS
1.2.1 Dimension and Weight (Rack Mount )
The dimension of the unit is as shown in the table below:
Monitor only Packing
Height (mm / inch) 534 / 21.02 780/ 30.71
Width (mm / inch) 584 / 22.99 790/ 31.10
Depth (mm / inch) 93.8 / 3.69 297.5/ 11.72
Weight (kg / lbs) 15.5 / 34.2 20.5 / 45.2
The following figures show a Rack Mount version mechanical dimension. IDP2310UX basically provides three
input connectors and all connectors are located the bottom side of monitor.
< IDP2310UX Front View : unit mm >

Issued Date
Revision Status
Title Page No.
15 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
< IDP2310UX Bottom View >
< IDP2310UX Rear View >

Issued Date
Revision Status
Title Page No.
16 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
< IDP2310UX Side View : unit mm>

Issued Date
Revision Status
Title Page No.
17 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
1.2.2 Mounting
The weight for the unit shall not exceed 15.5 kg (34.2 lbs)
Fixing: using 4 captive M6 bolts in front bezel
IDP2310UX can be Standard rack mounted with an optional adapter plate
1.2.3 Finishing
Standard Bezel color is Black (Rack Mount Type)
Other bezel colors can be made available on request
1.2.4 Screws/Bolts
Number of screws to use for maintenance: reduced to minimum
Type of screws requires maximum 3 standard tools
1.2.5 Components
Industrial extended temperature range components are used for cost, maintainability and reproducibility
purposes.
1.2.6 Cooling
The Unit does not need any forced air-cooling
1.3 ENVIRONMENTAL SPECIFICATIONS
The unit is designed to meet the following environmental standards:
1.3.1 Temperature
Operating : -15C ~ + 55C (+5F ~ +131F)
Storage : - 40C ~ + 70C (-40F ~ + 158F)
IEC60945
Note: The unit may show limited performance in case of continuous operation at low temperature due to the
increased response time and reduced brightness, and may not confirm to the requirements of this
specification.
1.3.2 Humidity
Operating: 10% - 90%
Storage: 5% - 95%
IEC60945
1.3.3 Vibration
1.03 Grms for 5 ~ 200Hz Random Vibration
1 hour (Z : 30 min, X,Y : 15 min, respectively)
Chassis Type with packing in carton box
IEC60945

Issued Date
Revision Status
Title Page No.
18 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
1.3.4 Altitude
Non-operating : Up to 30,000 ft
Operating : Up to 10,000 ft
1.3.5 EMC
FCC Part 15 subpart B, Class A
CE(EMC)
-EN55022(EMI)
-EN55024(EMS)
MIC
VCCI Class A
IEC60945
1.3.6 Safety
CE & CB
EN60950-1
UL / cUL
UL60950-1
1.3.7 Certificate for ECDIS
EN61174(IEC61174)
1.3.8 Drip-proof
Front side is drip-proof. Test shall be done when the unit is mounted in a console.
Front bezel: IP64
NOTE: The unit is type approved according to EN60945(2002),4.4, equipment category b)Protected from the
weather (formerly class B)
1.4 OHTER SPECIFICATIONS
1.4.1 Reliability
MTBF (Mean Time Between Failures)
Standard calculated MTBF : 40,986h (MIL-HDBK-217F)
Ship calculated MTBF : 19,468h (MIL-HDBK-217F)
1.4.2 Maintainability
MTTR (Mean Time Between Repair)
IDP2310UX is defined as a Line Replaceable Unit (LRU) and the unit is designed to allow for an MTTR
less than 0.5 hour (30 minutes).

Issued Date
Revision Status
Title Page No.
19 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
Use of maintenance equipment
A modular design is taken for the unit. No special tools or equipment are required for maintenance
purpose.
1.4.3 Use of toxic materials
Cold Cathode Fluorescent Lamp (CCFL) in the backlight assemblies contains a small amount of mercury. The
backlight assembly is placed inside of the monitor and is not exposed to user.
1.4.4 Packing
The unit shall be packaged for international transport by air freight in accordance with best practices for insuring
arrival at customer site in an undamaged condition.
1.4.5 Buzzer Option.

Issued Date
Revision Status
Title Page No.
20 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
2. Communication
2.1 Protocol
2.1.1 ASCII Characters Table
: All communications are based on ASCII Code.
ASCII
Code Char. ASCII Code Char. ASCII Code Char. ASCII Code Char.
0x00 NULL 0x20 SP 0x40 @0x60 `
0x01 SOH 0x21 !0x41 A0x61 a
0x02 STX 0x22 "0x42 B0x62 b
0x03 ETX 0x23 #0x43 C0x63 c
0x04 EOT 0x24 $0x44 D0x64 d
0x05 ENQ 0x25 %0x45 E0x65 e
0x06 ACK 0x26 &0x46 F0x66 f
0x07 BELL 0x27 '0x47 G0x67 g
0x08 BS 0x28 (0x48 H0x68 h
0x09 HT 0x29 )0x49 I0x69 i
0x0a LF 0x2a *0x4a J0x6a j
0x0b VT 0x2b +0x4b K0x6b k
0x0c FF 0x2c ,0x4c L0x6c l
0x0d CR 0x2d -0x4d M0x6d m
0x0e SO 0x2e .0x4e N0x6e n
0x0f SI 0x2f /0x4f O0x6f o
0x10 DLE 0x30 00x50 P0x70 p
0x11 DC1 0x31 10x51 Q0x71 q
0x12 DC2 0x32 20x52 R0x72 r
0x13 DC3 0x33 30x53 S0x73 s
0x14 DC4 0x34 40x54 T0x74 t
0x15 NAK 0x35 50x55 U0x75 u
0x16 SYN 0x36 60x56 V0x76 v
0x17 ETB 0x37 70x57 W0x77 w
0x18 CAN 0x38 80x58 X0x78 x
0x19 EM 0x39 90x59 Y0x79 y
0x1a SUB 0x3a :0x5a Z0x7a z
0x1b ESC 0x3b ;0x5b [0x7b {
0x1c FS 0x3c <0x5c \0x7c |
0x1d GS 0x3d =0x5d ]0x7d }
0x1e RS 0x3e >0x5e ^0x7e ~
0x1f US 0x3f ?0x5f _0x7f DEL
– End of ASCII Characters Table –