Wido KF600P User manual

User Guide
Foldable Portable Massage Table
Congratulations on the purchase of this portable massage table. Your new table
has been skillfully crafted to high standards, utilizing high quality components
and materials. With proper use and care, as outlined in this user’s guide, your
table should provide a longtime of reliable performance. To ensure the safe and
correct use of your table, please take a moment to read this entire guide prior to
using your table.

PRECAUTIONARY INSTRUCTIONS
(1)Maintain the table periodically. Make sure all secure and the cable has not
deteriorated or frayed. Make sure there are no cracks in the wood structure.
(2)Do not overload the table beyond the recommended weight limit. This could
result in serious injury to the user.
(3)Do not use alcohol based cleaners when cleaning the vinyl. This cause
damage to the vinyl material. Use warm soapy water and wipe dry.
(4)Make sure when using the table that all four legs are on solid flat surface and
at the same level.
Table set up
Place the table on its side,
release the buckles,
partially open the table ,
and remove the accessories(FIGURE 1)
Standing behind the table ,
rasp both table handles and gently
swing in an outward motion to fully open
the table. The legs should open
automatically (FIGURE 2)
Turn the table upright by lifting the middle of the table. Press down in the
middle of the table to make sure the table lays flat. If the table peaks in the
middle, check and straighten out the cables.
Table and the accessories use
We provide optional accessories for you. Please read instruction carefully before
ues.
Headrest:
The headrest consists of a crescent headrest base
and a crescent face pad. It will give your
client comfortable head and face support.
you may have different option for the headrest
base. The adjustable headrest is easy for you to Figure 3
change the angle and height of the base by
adjusting the base handle (FIGURE 3)
Adjustable armrest shelf:
This adjustable armrest shelf is a good device
support your client’s arms at the front of the
table. Hang the armrest shelf on the two bars of Figure 4
the headrest and slide the belt up or down
for the optimum position (FIGURE 4)
Figure 1

Arm sling:
This is an alternative armrest accessory with the
same function of the armrest shelf. Please Figure 5
refer to the usage notes of the armrest shelf FIGURE 5
Side arm extension:
This is the side arm extensions option for our table. These removable padded
side armrests add the table width. They fit into the required accessory holes in
each side of the table. That will give a comfortable arm support especially for
bigger clients.
Height adjustment:
Proper table height is determined by the therapist height and technique. You can
adjust the height by removing the grip knob from each leg. Replace the knobs
after adjusting each leg to the desired position.
Table weight limits:
Position the client in the center of the table, this will help distribute the weight
evenly and ensure stability. Gently sit near (not on) the center of the table at first
then sit as close to the center (from the edge) as possible the working weight is
the combined weight of the client and the maximum amount of downward
pressure being applied by the therapist. For example for a client weighing 300
pounds, the maximum working weight for the table is 500 pounds, the maximum
downward pressure that can safely be applied is 200 pounds, as pressure applied
at sideward angle puts considerably more stress on a table, the maximum
sideward pressure should not exceed 50% of the maximum downward pressure.
DO NOT EXCEED REFERRED MAXIMUM WORKING WEIGHT
(Never Exceed The Load Limits Of The Table;
Doing So May Result In Serious Injury And/Or Damage
Storage:
Attach headrest base and face pad onto the elastic
under the table as shown. Put all
accessories at their original position.
The carry case should be used when transporting or
storing the table to protect the table from damage. When not in use, store the
table in a cool dry place, and away from direct sunlight. Do not expose the table
to extreme (hot or cold) temperatures or moisture.
Table care
Upholstery care
Daily cleaning: remove daily dirt and grime from the table with a mild soap and
warm water solution and dry with a soft lint-free cloth.

Disinfecting: Disinfect the table as required, with an isoprppanol based hospital
grade disinfectant cleaner (approved for use on polyurethane vinyl).
Stain removal: some minor stains can be removed with a mild non-abrasive
cleaner. Spray a damp cloth with cleaners and gently wipe to remove stain, rinse
thoroughly with warm water and dry with a soft lint-free cloth. More stubborn
stains may require professional cleaning.
Note: never use harsh or abrasive cleaners or chemicals to clean the table. Doing
so may damage the upholstery. Avoid using any protectants, as they may harm
the vinyl.
Wood care:
Your massage table is made of select hardwoods and is finished with lacquer
that requires no special care. If desired, you may polish occasionally with a
quality wood care product. Keep the table dry and avoid exposure to wet or
humid environments. Should the table get wet, quickly and thoroughly dry with
a soft cloth.