
8
INSTRUCTION MANUAL ·WILFA SVART PRECISION
EN
FIRST USE OF THE MACHINE
Read this instruction carefully and keep them for future references.
Please start the coffee maker with fresh water and without coffee before it is used
for the rst time.
Wilfa SVART Precision is equipped with a unique pump that always ensures you
fresh water every time you brew coffee.
USE
• Set Wilfa SVART Precision on a at surface.
• Fill the removable water tank with fresh cold water; use the water scale on the
side.
• Place the coffee lter (1x4) in the lter holder. Use desired quantity of coffee in
the lter.
• We recommend that you use ground coffee, about 60 g per liter of water. Try
out the rst times until you nd out how much coffee you think is best. We
also recommend that you use our Wilfa Gram Stål scale that gives 1g intervals
for best results.
• We recommend the following ratios of water and coffee:
1,25 l - 75g
Please note that different grinds and coffee types will
inuence these ratios somewhat.
1 l - 60g
0,75 l - 45g
0,5 l - 30g
0,25 l - 15g
• Set the ow control in relation to water/coffee.
• Turn the power switch on. “Start” button will blink twice.
• Press the start button to start to brewing process.
• Wilfa SVART Precision has a unique pump that pulls water through the system
from the rst to the last drop.
• When the brewing process is complete, the unit will go to a “keep warm”
position for up to 40 minutes.
• By setting the ow control to the right, it will act as a drip stop.
• The coffee should be served fresh.
• Turn of the power switch, when you are nished using the maker.