Williams-Sonoma Wythe User manual

1of 3
For assistance call
877.812.6235
ASSEMBLY INSTRUCTION FOR BURLWOOD DINING TABLE
IMPORTANT SAFETY INSTRUCTION:
Please read all instructions carefully before assembling.
For your safety, assembly by two or more adults is strongly recommended.
Keep instructions for future use.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
PART INCLUDED:
A. Top Table 1x
B. metal Leg 4x
HARDWARE INCLUDED:
C. Bolts M8 x 80mm
16x
D. Washer 16x
E. Hex Key 1x

2of 3
For assistance call
877.812.6235
ASSEMBLY INSTRUCTION:
STEP 1: Lay top table (A) upside down on flat and scratch free surface. Align the predrilled holes on leg (B) to the
predrilled holes on table top (A). Insert the flat washer (D), Bolts (C) into the predrilled holes on leg.
Tighten using Hex Key (E).
STEP 2: carefully, grab the table upside down. If the floor is uneven adjust the recessed levelers found on the
bottom of the furniture. Assembly is complete.
CARE INSTRUCTION:
Dust often using a clean, soft, dry and lint-free cloth.
Blot spills immediately and wipe with a clean, damp, cloth.
We do not recommend the use of chemical cleaners, abrasives or furniture polish on our lacquered finish
B
A
C
B
D
E

3of 3
For assistance call
877.812.6235
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary