Wilo Star RS Series User manual

4131013-Ed.01/2009-02 DDD
Wilo-Star RS, RSD, ST, RSG, AC
D Einbau- und Betriebsanleitung
GB Installation and operating instructions
F Notice de montage et de mise en service
NL Montage- en bedieningsvoorschrift
I Istruzioni di montaggio, uso e manutenzione
E Instrucciones de instalación y funcionamiento
S Installations- och skötselinstruktioner
FIN Huolto- ja käyttöohje
HBeépítési és üzemeltetési utasítás
PL Instrukcja montażu i obsługi
CZ Návod k montáži a obsluze
SK Návod na montáža obsluhu
RO Instrucfliuni de montaj øi expolatare
GR Οδηγίες εγκατάστασης και λειτουργίας
RUS Инструкция по монтажу и експлуатации
LT Montavimo ir naudojimo instrukcija
LV Uzstādīšanas un ekspluatācijas instrukcija
UK Інструкція по монтажу та експлуатації
TR Montaj ve kullanma kılavuzu
WILO SE
Nortkirchenstraße 100
44263 Dortmund
Germany
T 0231 4102-0
F 0231 4102-7363
[email protected]
www.wilo.de
G1 Nord
WILO SE
Vertriebsbüro Hamburg
Beim Strohhause 27
20097 Hamburg
T 040 5559490
F 040 55594949
[email protected]
G2 Ost
WILO SE
Vertriebsbüro Berlin
Juliusstraße 52–53
12051 Berlin-Neukölln
T 030 6289370
F 030 62893770
[email protected]
G3 Sachsen/Thüringen
WILO SE
Vertriebsbüro Dresden
Frankenring 8
01723 Kesselsdorf
T 035204 7050
F 035204 70570
[email protected]
G4 Südost
WILO SE
Vertriebsbüro München
Adams-Lehmann-Straße 44
80797 München
T 089 4200090
F 089 42000944
[e-mail]
G5 Südwest
WILO SE
Vertriebsbüro Stuttgart
Hertichstraße 10
71229 Leonberg
T 07152 94710
F 07152 947141
[email protected]
G6 Rhein-Main
WILO SE
Vertriebsbüro Frankfurt
An den drei Hasen 31
61440 Oberursel/Ts.
T 06171 70460
F 06171 704665
[email protected]
G7 West
WILO SE
Vertriebsbüro Düsseldorf
Westring 19
40721 Hilden
T 02103 90920
F 02103 909215
[e-mail]
Kompetenz-Team
Gebäudetechnik
WILO SE
Nortkirchenstraße 100
44263 Dortmund
T 0231 4102-7516
T 01805 R•U•F•W•I•L•O*
7•8•3•9•4•5•6
F 0231 4102-7666
Kompetenz-Team
Kommune
Bau + Bergbau
WILO EMU GmbH
Heimgartenstraße 1
95030 Hof
T 09281 974-550
F 09281 974-551
Werkskundendienst
Gebäudetechnik
Kommune
Bau + Bergbau
Industrie
WILO SE
Nortkirchenstraße 100
44263 Dortmund
T 0231 4102-7900
T 01805 W•I•L•O•K•D*
9•4•5•6•5•3
F 0231 4102-7126
[email protected]
Erreichbar Mo–Fr von
7–17 Uhr.
Wochenende und feier-
tags 9–14 Uhr elektro-
nische Bereitschaft mit
Rückruf-Garantie!
– Kundendienst-
Anforderung
– Werksreparaturen
– Ersatzteilfragen
– Inbetriebnahme
– Inspektion
– Technische Service-
Beratung
– Qualitätsanalyse
Wilo-International
Österreich
Zentrale Wien:
WILO Pumpen
Österreich GmbH
Eitnergasse 13
1230 Wien
T [phone]
F [phone]
Vertriebsbüro Salzburg:
Gnigler Straße 56
5020 Salzburg
T [phone]
F [phone]
Vertriebsbüro
Oberösterreich:
Trattnachtalstraße 7
4710 Grieskirchen
T [phone]
F [phone]
Schweiz
EMB Pumpen AG
Gerstenweg 7
4310 Rheinfelden
T [phone]
F [phone]
Standorte weiterer
Tochtergesellschaften
Argentinien,
Aserbaidschan, Belarus,
Belgien, Bulgarien, China,
Dänemark, Estland,
Finnland, Frankreich,
Griechenland, Groß-
britannien, Irland, Italien,
Kanada, Kasachstan, Korea,
Kroatien, Lettland, Libanon,
Litauen, Niederlande,
Norwegen, Polen, Portugal,
Rumänien, Russland,
Saudi-Arabien, Schweden,
Serbien und Montenegro,
Slowakei, Slowenien,
Spanien, Südafrika, Taiwan,
Tschechien, Türkei,
Ukraine, Ungarn, Vereinigte
Arabische Emirate,
Vietnam, USA
Die Adressen finden Sie
unter www.wilo.de oder
www.wilo.com.
Stand Januar 2009
Wilo-Vertriebsbüros in Deutschland
Erreichbar Mo–Fr von 7–18 Uhr.
– Antworten auf
– Produkt- und Anwendungsfragen
– Liefertermine und Lieferzeiten
– Informationen über Ansprechpartner vor Ort
– Versand von Informationsunterlagen
* 14 Cent pro Minute aus dem deutschen
Festnetz der T-Com. Bei Anrufen aus
Mobilfunknetzen sind Preisabweichungen
möglich.

4131013-Ed.01/2009-02 DDD
Wilo-Star RS, RSD, ST, RSG, AC
D Einbau- und Betriebsanleitung
GB Installation and operating instructions
F Notice de montage et de mise en service
NL Montage- en bedieningsvoorschrift
I Istruzioni di montaggio, uso e manutenzione
E Instrucciones de instalación y funcionamiento
S Installations- och skötselinstruktioner
FIN Huolto- ja käyttöohje
HBeépítési és üzemeltetési utasítás
PL Instrukcja montażu i obsługi
CZ Návod k montáži a obsluze
SK Návod na montáža obsluhu
RO Instrucfliuni de montaj øi expolatare
GR Οδηγίες εγκατάστασης και λειτουργίας
RUS Инструкция по монтажу и експлуатации
LT Montavimo ir naudojimo instrukcija
LV Uzstādīšanas un ekspluatācijas instrukcija
UK Інструкція по монтажу та експлуатації
TR Montaj ve kullanma kılavuzu
WILO SE
Nortkirchenstraße 100
44263 Dortmund
Germany
T 0231 4102-0
F 0231 4102-7363
[email protected]
www.wilo.de
G1 Nord
WILO SE
Vertriebsbüro Hamburg
Beim Strohhause 27
20097 Hamburg
T 040 5559490
F 040 55594949
[email protected]
G2 Ost
WILO SE
Vertriebsbüro Berlin
Juliusstraße 52–53
12051 Berlin-Neukölln
T 030 6289370
F 030 62893770
[email protected]
G3 Sachsen/Thüringen
WILO SE
Vertriebsbüro Dresden
Frankenring 8
01723 Kesselsdorf
T 035204 7050
F 035204 70570
[email protected]
G4 Südost
WILO SE
Vertriebsbüro München
Adams-Lehmann-Straße 44
80797 München
T 089 4200090
F 089 42000944
[e-mail]
G5 Südwest
WILO SE
Vertriebsbüro Stuttgart
Hertichstraße 10
71229 Leonberg
T 07152 94710
F 07152 947141
[email protected]
G6 Rhein-Main
WILO SE
Vertriebsbüro Frankfurt
An den drei Hasen 31
61440 Oberursel/Ts.
T 06171 70460
F 06171 704665
[email protected]
G7 West
WILO SE
Vertriebsbüro Düsseldorf
Westring 19
40721 Hilden
T 02103 90920
F 02103 909215
[e-mail]
Kompetenz-Team
Gebäudetechnik
WILO SE
Nortkirchenstraße 100
44263 Dortmund
T 0231 4102-7516
T 01805 R•U•F•W•I•L•O*
7•8•3•9•4•5•6
F 0231 4102-7666
Kompetenz-Team
Kommune
Bau + Bergbau
WILO EMU GmbH
Heimgartenstraße 1
95030 Hof
T 09281 974-550
F 09281 974-551
Werkskundendienst
Gebäudetechnik
Kommune
Bau + Bergbau
Industrie
WILO SE
Nortkirchenstraße 100
44263 Dortmund
T 0231 4102-7900
T 01805 W•I•L•O•K•D*
9•4•5•6•5•3
F 0231 4102-7126
[email protected]
Erreichbar Mo–Fr von
7–17 Uhr.
Wochenende und feier-
tags 9–14 Uhr elektro-
nische Bereitschaft mit
Rückruf-Garantie!
– Kundendienst-
Anforderung
– Werksreparaturen
– Ersatzteilfragen
– Inbetriebnahme
– Inspektion
– Technische Service-
Beratung
– Qualitätsanalyse
Wilo-International
Österreich
Zentrale Wien:
WILO Pumpen
Österreich GmbH
Eitnergasse 13
1230 Wien
T [phone]
F [phone]
Vertriebsbüro Salzburg:
Gnigler Straße 56
5020 Salzburg
T [phone]
F [phone]
Vertriebsbüro
Oberösterreich:
Trattnachtalstraße 7
4710 Grieskirchen
T [phone]
F [phone]
Schweiz
EMB Pumpen AG
Gerstenweg 7
4310 Rheinfelden
T [phone]
F [phone]
Standorte weiterer
Tochtergesellschaften
Argentinien,
Aserbaidschan, Belarus,
Belgien, Bulgarien, China,
Dänemark, Estland,
Finnland, Frankreich,
Griechenland, Groß-
britannien, Irland, Italien,
Kanada, Kasachstan, Korea,
Kroatien, Lettland, Libanon,
Litauen, Niederlande,
Norwegen, Polen, Portugal,
Rumänien, Russland,
Saudi-Arabien, Schweden,
Serbien und Montenegro,
Slowakei, Slowenien,
Spanien, Südafrika, Taiwan,
Tschechien, Türkei,
Ukraine, Ungarn, Vereinigte
Arabische Emirate,
Vietnam, USA
Die Adressen finden Sie
unter www.wilo.de oder
www.wilo.com.
Stand Januar 2009
Wilo-Vertriebsbüros in Deutschland
Erreichbar Mo–Fr von 7–18 Uhr.
– Antworten auf
– Produkt- und Anwendungsfragen
– Liefertermine und Lieferzeiten
– Informationen über Ansprechpartner vor Ort
– Versand von Informationsunterlagen
* 14 Cent pro Minute aus dem deutschen
Festnetz der T-Com. Bei Anrufen aus
Mobilfunknetzen sind Preisabweichungen
möglich.

4131013-Ed.01/2009-02 DDD
Wilo-Star RS, RSD, ST, RSG, AC
D Einbau- und Betriebsanleitung
GB Installation and operating instructions
F Notice de montage et de mise en service
NL Montage- en bedieningsvoorschrift
I Istruzioni di montaggio, uso e manutenzione
E Instrucciones de instalación y funcionamiento
S Installations- och skötselinstruktioner
FIN Huolto- ja käyttöohje
HBeépítési és üzemeltetési utasítás
PL Instrukcja montażu i obsługi
CZ Návod k montáži a obsluze
SK Návod na montáža obsluhu
RO Instrucfliuni de montaj øi expolatare
GR Οδηγίες εγκατάστασης και λειτουργίας
RUS Инструкция по монтажу и експлуатации
LT Montavimo ir naudojimo instrukcija
LV Uzstādīšanas un ekspluatācijas instrukcija
UK Інструкція по монтажу та експлуатації
TR Montaj ve kullanma kılavuzu
WILO SE
Nortkirchenstraße 100
44263 Dortmund
Germany
T 0231 4102-0
F 0231 4102-7363
[email protected]
www.wilo.de
G1 Nord
WILO SE
Vertriebsbüro Hamburg
Beim Strohhause 27
20097 Hamburg
T 040 5559490
F 040 55594949
[email protected]
G2 Ost
WILO SE
Vertriebsbüro Berlin
Juliusstraße 52–53
12051 Berlin-Neukölln
T 030 6289370
F 030 62893770
[email protected]
G3 Sachsen/Thüringen
WILO SE
Vertriebsbüro Dresden
Frankenring 8
01723 Kesselsdorf
T 035204 7050
F 035204 70570
[email protected]
G4 Südost
WILO SE
Vertriebsbüro München
Adams-Lehmann-Straße 44
80797 München
T 089 4200090
F 089 42000944
[e-mail]
G5 Südwest
WILO SE
Vertriebsbüro Stuttgart
Hertichstraße 10
71229 Leonberg
T 07152 94710
F 07152 947141
[email protected]
G6 Rhein-Main
WILO SE
Vertriebsbüro Frankfurt
An den drei Hasen 31
61440 Oberursel/Ts.
T 06171 70460
F 06171 704665
[email protected]
G7 West
WILO SE
Vertriebsbüro Düsseldorf
Westring 19
40721 Hilden
T 02103 90920
F 02103 909215
[e-mail]
Kompetenz-Team
Gebäudetechnik
WILO SE
Nortkirchenstraße 100
44263 Dortmund
T 0231 4102-7516
T 01805 R•U•F•W•I•L•O*
7•8•3•9•4•5•6
F 0231 4102-7666
Kompetenz-Team
Kommune
Bau + Bergbau
WILO EMU GmbH
Heimgartenstraße 1
95030 Hof
T 09281 974-550
F 09281 974-551
Werkskundendienst
Gebäudetechnik
Kommune
Bau + Bergbau
Industrie
WILO SE
Nortkirchenstraße 100
44263 Dortmund
T 0231 4102-7900
T 01805 W•I•L•O•K•D*
9•4•5•6•5•3
F 0231 4102-7126
[email protected]
Erreichbar Mo–Fr von
7–17 Uhr.
Wochenende und feier-
tags 9–14 Uhr elektro-
nische Bereitschaft mit
Rückruf-Garantie!
– Kundendienst-
Anforderung
– Werksreparaturen
– Ersatzteilfragen
– Inbetriebnahme
– Inspektion
– Technische Service-
Beratung
– Qualitätsanalyse
Wilo-International
Österreich
Zentrale Wien:
WILO Pumpen
Österreich GmbH
Eitnergasse 13
1230 Wien
T [phone]
F [phone]
Vertriebsbüro Salzburg:
Gnigler Straße 56
5020 Salzburg
T [phone]
F [phone]
Vertriebsbüro
Oberösterreich:
Trattnachtalstraße 7
4710 Grieskirchen
T [phone]
F [phone]
Schweiz
EMB Pumpen AG
Gerstenweg 7
4310 Rheinfelden
T [phone]
F [phone]
Standorte weiterer
Tochtergesellschaften
Argentinien,
Aserbaidschan, Belarus,
Belgien, Bulgarien, China,
Dänemark, Estland,
Finnland, Frankreich,
Griechenland, Groß-
britannien, Irland, Italien,
Kanada, Kasachstan, Korea,
Kroatien, Lettland, Libanon,
Litauen, Niederlande,
Norwegen, Polen, Portugal,
Rumänien, Russland,
Saudi-Arabien, Schweden,
Serbien und Montenegro,
Slowakei, Slowenien,
Spanien, Südafrika, Taiwan,
Tschechien, Türkei,
Ukraine, Ungarn, Vereinigte
Arabische Emirate,
Vietnam, USA
Die Adressen finden Sie
unter www.wilo.de oder
www.wilo.com.
Stand Januar 2009
Wilo-Vertriebsbüros in Deutschland
Erreichbar Mo–Fr von 7–18 Uhr.
– Antworten auf
– Produkt- und Anwendungsfragen
– Liefertermine und Lieferzeiten
– Informationen über Ansprechpartner vor Ort
– Versand von Informationsunterlagen
* 14 Cent pro Minute aus dem deutschen
Festnetz der T-Com. Bei Anrufen aus
Mobilfunknetzen sind Preisabweichungen
möglich.

N
L
N
L
N
L
N
L
/
/
1 230 V
50 Hz
a
bc
N
L
WILO SE
Nortkirchenstraße 100
44263 Dortmund
Germany
T [phone]
F [phone]
[email protected]
www.wilo.com
Wilo – International (Subsidiaries)
Wilo – International (Representation offices)
Argentina
WILO SALMSON
Argentina S.A.
C1270ABE Ciudad
Autónoma de Buenos Aires
T [phone]
[e-mail]
Austria
WILO Pumpen
Österreich GmbH
1230 Wien
T [phone]
[email protected]
Azerbaijan
WILO Caspian LLC
1065 Baku
T [phone]
[email protected]
Belarus
WILO Bel OOO
220035 Minsk
T [phone]
[email protected]
Belgium
WILO SA/NV
1083 Ganshoren
T [phone]
[email protected]
Bulgaria
WILO Bulgaria Ltd.
1125 Sofia
T [phone]
[email protected]
Canada
WILO Canada Inc.
Calgary, Alberta T2A 5L4
T [phone]
[email protected]
China
WILO China Ltd.
101300 Beijing
T [phone]
[email protected]
Croatia
WILO Hrvatska d.o.o.
10090 Zagreb
T [phone]
[email protected]
Czech Republic
WILO Praha s.r.o.
25101 Cestlice
T [phone]
[email protected]
Denmark
WILO Danmark A/S
2690 Karlslunde
T [phone]
[email protected]
Estonia
WILO Eesti OÜ
12618 Tallinn
T [phone]
[email protected]
Finland
WILO Finland OY
02330 Espoo
T [phone]
[email protected]
France
WILO S.A.S.
78390 Bois d'Arcy
T [phone]
[email protected]
Great Britain
WILO (U.K.) Ltd.
DE14 2WJ Burton-
Upon-Trent
T [phone]
[email protected]
Greece
WILO Hellas AG
14569 Anixi (Attika)
T [phone]
[email protected]
Hungary
WILO Magyarország Kft
2045 Törökbálint
(Budapest)
T [phone]
[email protected]
Ireland
WILO Engineering Ltd.
Limerick
T [phone]
[email protected]
Italy
WILO Italia s.r.l.
20068 Peschiera Borromeo
(Milano)
T [phone]
[email protected]
Kazakhstan
WILO Central Asia
050002 Almaty
T [phone]
[email protected]
Korea
WILO Pumps Ltd.
621-807 Gimhae
Gyeongnam
T [phone]
[email protected]
Latvia
WILO Baltic SIA
1019 Riga
T [phone]
[email protected]
Lebanon
WILO SALMSON
Lebanon
12022030 El Metn
T [phone]
[email protected]
Lithuania
WILO Lietuva UAB
03202 Vilnius
T [phone]
[email protected]
The Netherlands
WILO Nederland b.v.
1551 NA Westzaan
T [phone]
[email protected]
Norway
WILO Norge AS
0975 Oslo
T [phone]
[email protected]
Poland
WILO Polska Sp. z.o.o.
05-090 Raszyn
T [phone]
[email protected]
Portugal
Bombas Wilo-Salmson
Portugal Lda.
4050-040 Porto
T [phone]
[email protected]
Romania
WILO Romania s.r.l.
077040 Com. Chiajna Jud.
Ilfov
T [phone]
[email protected]
Russia
WILO Rus ooo
123592 Moscow
T [phone]
[email protected]
Saudi Arabia
WILO ME - Riyadh
Riyadh 11465
T [phone]
[email protected]
Serbia and Montenegro
WILO Beograd d.o.o.
11000 Beograd
T [phone]
[e-mail]
Slovakia
WILO Slovakia s.r.o.
82008 Bratislava 28
T [phone]
[email protected]
Slovenia
WILO Adriatic d.o.o.
1000 Ljubljana
T [phone]
[email protected]
South Africa
Salmson South Africa
1610 Edenvale
T [phone]
errol.cornelius@
salmson.co.za
Spain
WILO Ibérica S.A.
28806 Alcalá de Henares
(Madrid)
T [phone]
[email protected]
Sweden
WILO Sverige AB
35246 Växjö
T [phone]
[email protected]
Switzerland
EMB Pumpen AG
4310 Rheinfelden
T [phone]
[email protected]
Taiwan
WILO-EMU Taiwan Co. Ltd.
110 Taipeh
T [phone]
nelson.wu@
wiloemutaiwan.com.tw
Turkey
WILO Pompa Sistemleri
San. ve Tic. A.S¸.
34530 Istanbul
T [phone]
[email protected]
Ukraina
WILO Ukraina t.o.w.
01033 Kiew
T [phone]
[email protected]
Vietnam
Pompes Salmson Vietnam
Ho Chi Minh-Ville Vietnam
T [phone]
[email protected]
United Arab Emirates
WILO ME - Dubai
Dubai
T [phone]
[email protected]
USA
WILO-EMU USA LLC
Thomasville,
Georgia 31792
T [phone]
[email protected]
USA
WILO USA LLC
Melrose Park, Illinois 60160
T [phone]
mike.easterley@
wilo-na.com
Algeria
Bad Ezzouar, Dar El Beida
T [phone]
Armenia
375001 Yerevan
T [phone]
Bosnia and Herzegovina
71000 Sarajevo
T [phone]
Georgia
0179 Tbilisi
T [phone]
Macedonia
1000 Skopje
T [phone]
Mexico
07300 Mexico
T [phone]
Moldova
2012 Chisinau
T [phone]
Rep. Mongolia
Ulaanbaatar
T [phone]
Tajikistan
734025 Dushanbe
T [phone]
Turkmenistan
744000 Ashgabad
T [phone]
Uzbekistan
100015 Tashkent
T [phone]
January 2009

N
L
N
L
N
L
N
L
/
/
1 230 V
50 Hz
a
bc
N
L
WILO SE
Nortkirchenstraße 100
44263 Dortmund
Germany
T [phone]
F [phone]
[email protected]
www.wilo.com
Wilo – International (Subsidiaries)
Wilo – International (Representation offices)
Argentina
WILO SALMSON
Argentina S.A.
C1270ABE Ciudad
Autónoma de Buenos Aires
T [phone]
[e-mail]
Austria
WILO Pumpen
Österreich GmbH
1230 Wien
T [phone]
[email protected]
Azerbaijan
WILO Caspian LLC
1065 Baku
T [phone]
[email protected]
Belarus
WILO Bel OOO
220035 Minsk
T [phone]
[email protected]
Belgium
WILO SA/NV
1083 Ganshoren
T [phone]
[email protected]
Bulgaria
WILO Bulgaria Ltd.
1125 Sofia
T [phone]
[email protected]
Canada
WILO Canada Inc.
Calgary, Alberta T2A 5L4
T [phone]
[email protected]
China
WILO China Ltd.
101300 Beijing
T [phone]
[email protected]
Croatia
WILO Hrvatska d.o.o.
10090 Zagreb
T [phone]
[email protected]
Czech Republic
WILO Praha s.r.o.
25101 Cestlice
T [phone]
[email protected]
Denmark
WILO Danmark A/S
2690 Karlslunde
T [phone]
[email protected]
Estonia
WILO Eesti OÜ
12618 Tallinn
T [phone]
[email protected]
Finland
WILO Finland OY
02330 Espoo
T [phone]
[email protected]
France
WILO S.A.S.
78390 Bois d'Arcy
T [phone]
[email protected]
Great Britain
WILO (U.K.) Ltd.
DE14 2WJ Burton-
Upon-Trent
T [phone]
[email protected]
Greece
WILO Hellas AG
14569 Anixi (Attika)
T [phone]
[email protected]
Hungary
WILO Magyarország Kft
2045 Törökbálint
(Budapest)
T [phone]
[email protected]
Ireland
WILO Engineering Ltd.
Limerick
T [phone]
[email protected]
Italy
WILO Italia s.r.l.
20068 Peschiera Borromeo
(Milano)
T [phone]
[email protected]
Kazakhstan
WILO Central Asia
050002 Almaty
T [phone]
[email protected]
Korea
WILO Pumps Ltd.
621-807 Gimhae
Gyeongnam
T [phone]
[email protected]
Latvia
WILO Baltic SIA
1019 Riga
T [phone]
[email protected]
Lebanon
WILO SALMSON
Lebanon
12022030 El Metn
T [phone]
[email protected]
Lithuania
WILO Lietuva UAB
03202 Vilnius
T [phone]
[email protected]
The Netherlands
WILO Nederland b.v.
1551 NA Westzaan
T [phone]
[email protected]
Norway
WILO Norge AS
0975 Oslo
T [phone]
[email protected]
Poland
WILO Polska Sp. z.o.o.
05-090 Raszyn
T [phone]
[email protected]
Portugal
Bombas Wilo-Salmson
Portugal Lda.
4050-040 Porto
T [phone]
[email protected]
Romania
WILO Romania s.r.l.
077040 Com. Chiajna Jud.
Ilfov
T [phone]
[email protected]
Russia
WILO Rus ooo
123592 Moscow
T [phone]
[email protected]
Saudi Arabia
WILO ME - Riyadh
Riyadh 11465
T [phone]
[email protected]
Serbia and Montenegro
WILO Beograd d.o.o.
11000 Beograd
T [phone]
[e-mail]
Slovakia
WILO Slovakia s.r.o.
82008 Bratislava 28
T [phone]
[email protected]
Slovenia
WILO Adriatic d.o.o.
1000 Ljubljana
T [phone]
[email protected]
South Africa
Salmson South Africa
1610 Edenvale
T [phone]
errol.cornelius@
salmson.co.za
Spain
WILO Ibérica S.A.
28806 Alcalá de Henares
(Madrid)
T [phone]
[email protected]
Sweden
WILO Sverige AB
35246 Växjö
T [phone]
[email protected]
Switzerland
EMB Pumpen AG
4310 Rheinfelden
T [phone]
[email protected]
Taiwan
WILO-EMU Taiwan Co. Ltd.
110 Taipeh
T [phone]
nelson.wu@
wiloemutaiwan.com.tw
Turkey
WILO Pompa Sistemleri
San. ve Tic. A.S¸.
34530 Istanbul
T [phone]
[email protected]
Ukraina
WILO Ukraina t.o.w.
01033 Kiew
T [phone]
[email protected]
Vietnam
Pompes Salmson Vietnam
Ho Chi Minh-Ville Vietnam
T [phone]
[email protected]
United Arab Emirates
WILO ME - Dubai
Dubai
T [phone]
[email protected]
USA
WILO-EMU USA LLC
Thomasville,
Georgia 31792
T [phone]
[email protected]
USA
WILO USA LLC
Melrose Park, Illinois 60160
T [phone]
mike.easterley@
wilo-na.com
Algeria
Bad Ezzouar, Dar El Beida
T [phone]
Armenia
375001 Yerevan
T [phone]
Bosnia and Herzegovina
71000 Sarajevo
T [phone]
Georgia
0179 Tbilisi
T [phone]
Macedonia
1000 Skopje
T [phone]
Mexico
07300 Mexico
T [phone]
Moldova
2012 Chisinau
T [phone]
Rep. Mongolia
Ulaanbaatar
T [phone]
Tajikistan
734025 Dushanbe
T [phone]
Turkmenistan
744000 Ashgabad
T [phone]
Uzbekistan
100015 Tashkent
T [phone]
January 2009

D Einbau- und Betriebsanleitung 7
GB Installation and operating instructions 14
F Notice de montage et de mise en service 21
NL Montage- en bedieningsvoorschrift 29
I Istruzioni di montaggio, uso e manutenzione 36
E Instrucciones de instalación y funcionamiento 44
S Installations- och skötselinstruktioner 52
FIN Huolto- ja käyttöohje 59
HBeépítési és üzemeltetési utasítás 66
PL Instrukcja montażu i obsługi 74
CZ Návod k montáži a obsluze 82
SK Návod na montážaobsluhu 89
RO Instrucţiuni de montaj și expolatare 96
GR Οδηγίες εγκατάστασης και λειτουργίας 104
RUS Инструкция по монтажу и експлуатации 114
LT Montavimo ir naudojimo instrukcija 123
LV Uzstādīšanas un ekspluatācijas instrukcija 130
UK Інструкція по монтажу та експлуатації 138
TR Montaj ve kullanma kılavuzu 146

14
ENGLISH
1 General Information
These Operating Instructions explain
the functions and operation of the
pump when installed and ready for
use. The figures referred to in the text
can be found on the fold-out page at
the front.
Use as prescribed
The circulating pump (hereafter refer-
red to simply as pump or general unit)
is used to pump liquids in pipe
systems.
The pump must not be
used for handling drinking
water or food related
liquids.
Its main fields of application are:
– Hot-water heating, various systems,
– Industrial, closed circulating
systems.
Specific details:
– Type ST: for thermal solar systems
– Type RSG: for geothermal systems
– Type AC: for air-conditioning units
and cold-water distribution.
Terms (Fig. 1)
1 Suction joint
2 Condensate outlet
3 Pump housing
4 Pressure joint
5 Terminal box
6 Cable entry
7 Speed switch
8 Ventilation
9 Rating plate
10 Motor housing
Connection and electrical data
Voltage: 1~230V ±10%
Mains frequency: 50Hz
Power consumption
Pmax: Rating plate
Motor speed, max.: Rating plate
Protection
category IP: Rating plate
Speed setting: 3 stages *
Fitting length: 130/180 mm
Perm. operating
pressure, max.: 10bar
Perm. medium
temperatures
min./max.: -10/+110 °C
Rating plate Star-RS 30/4
Heating circulating pumps,
glandless pumps
RS Screwed pipe pump
RSD Double pump
ST Solarthermal pump
RSG Geothermal heat pump
AC Air-conditioning pump
Nominal width [mm]
15, 20 (Rp1/2), 25 (Rp1), 30 (Rp11/4)
Maximum delivery head [m]

15
ENGLISH
Perm. ambient
temperatures max.: +40 °C
Min. inlet pressure** at suction side at
+ 50 °C: 0.05 bar
+ 95 °C: 0.3 bar
+110 °C: 1.0 bar
* For double pumps the additional
switchgear S2R 3D is required for
time-controlled main/reserve or
additional/peak-load operation.
** The values are valid up to 300 m
above sea level. For higher elevati-
ons add: 0.01 bar/100 m.
The minimim inlet pressure must be
maintained in order to avoid cavita-
tion noise!
Permissible fluids:
– Heating water acc. to VDI 2035
– Water and water/glycol mixtures in
aratio up to 1:1. Glycol mixtures
require a reassessment of pump
hydraulic data in line with the
increased viscosity and depending
on mixing ratios. Only approved
makes of additives with corrosion
inhibitors must be used in strict
compliance with manufacturers'
instructions.
– For use of other kinds of fluids con-
sult WILO first.
2 Safety
These instructions contains basic
reference which must be strictly adhe-
red. It is therefore imperative for the
installer and operator to carefully read
these instructions prior to installation
and commissioning.
Please observe, not only the safety
directions under the main heading
„safety rules“, but also those added
and specially marked under the
ensuing headers.
Safety marks contained in these
instructions
Safety rules contained herein which, if
not complied with, may be dangerous
to persons are specially highlighted by
the following danger symbols:
Danger from electrical causes:
Safety references which, if not com-
plied with, may cause damage to the
pump / installation or impair its func-
tions are highlighted by the word:
Staff training
The personnel installing the pump /
unit must have the appropriate qualifi-
cations for this work.
Dangers from non-observance of
safety rules
Non-observance of safety reference
may cause personal injury or damage
to the pump or installation. Failure to
comply with the safety references
could invalidate warranty and/or
damage claims.
In particular,non-compliance may, for
example, cause the following dange-
rous situations:
ATTENTION!

16
ENGLISH
– Failure of important pump or unit
functions,
– Causing personal injury due to
electrical or mechanical causes.
Safety rules for the operator
Local regulations for the prevention of
accidents must be observed.
Dangers caused by electrical energy
must be excluded. Local or general
regulations [e.g. IEC, VDE, etc.] and
directives from local energy supply
companies areto be followed.
Safety rules for inspection and
installation work
The operator must ensure that all ins-
pection and installation work is car-
ried out by authorised and qualified
specialists who have carefully studied
these instructions.
Work on the pump/unit must be car-
ried out only with the machine swit-
ched off and at compete standstill.
Unauthorized modification and
manufacture of spare parts
Alterations to the pump or installation
may only be carried out with the
manufacturer's agreement.
The use of original spare parts and
accessories authorised by the manu-
facturer will ensure safety. The use of
any other parts may invalidate claims
invoking the liability of the manufactu-
rer for any consequences.
Unauthorised operating methods
The operating safety of the pump or
installation supplied can only be gua-
ranteed if it is used in accordance
with paragraph 1 of the operating
instructions. Under no circumstances
should the limit values given in the
data sheet be exceeded.
3 Transport/Interim
storage
The pump contains
electronic components
and must be protected
against moisture from
outside and mechani-
cal damage (shock /
impact) (Fig. 7). It must
not be exposed to tem-
peratures outside the
range -10 °C to +50 °C.
(Fig. 7).
4 Description of
pump/accessories
Products delivered
– Complete pump
–2flat gaskets,
–Installation and operating in-
structions
Pump description
In the wet-running pump all rotating
parts aresurrounded by the flow
medium, including the motor rotor.
Ashaft seal, whichwould be subject
to wear and tear,is not required. The
pumping medium lubricates the fric-
tion bearing and cools both bearing
and rotor.
No
motor overload protection is
required.
Even the maximum overload current
cannot damage the motor. The motor
operates non-overloading.
ATTENTION!

17
ENGLISH
Speed setting (Fig. 8)
The speed of the pump can be adju-
sted with a 3-position rotary button. In
position 3 the speed is approx.
40...50 % of the maximum speed with
the power consumption being redu-
ced to 50 %.
Particular features of the pumps
Double pumps
contain two identical-
ly constructed pump heads in a com-
mon pump housing with integrated
change-over flap. Each pump can run
in single mode, and both pumps can
also run simultaneously in parallel
mode. The operating modes are
main/reserve operation or incremen-
tal/peak-load operation. The pump
heads can be selected of different
capacities. Double pumps are suitable
of adapting a pipe system to suit indi-
vidual load characteristics. The S2R
3D control unit must be connected to
control the different operating modes.
The ST... and RSG... pumps are pumps
with special hydraulics for use in solar
thermal systems (Type ST...) or geo-
thermal systems (Type RSG...).
The
AC 20/...-I(O) pump is an air-
conditioning pump
with a plasitc
(composite) pump housing for use in
air-conditioning units and cold-water
distribution.
In the AC ../..
-I :
(I =
i nline) pump the pump housing is
designed „inline“-, i. e. suction and
pressure connections are in line.
The AC ../..
-O :
(O =
o ffline) pump is equipped with
axial suction and radial discharge
connection.
Accessories
Accessories must be ordered separa-
tely.
– Inserts for the pipe connection of
the screwed-pipe pump.
– S2R 3D switchgear for double
pump.
– Thermal insulating units for later
insulation of the ST/RSG 25 pump.
5 Assembly/
Installation
Installation
Installation and ser-
vice by qualified per-
sonnel only!
– Assembly should only take place
once all welding and soldering
work and the rinsing of the pipe
network has been completed. Dirt
can have an adverse effect on the
functioning of the pump.
– The pump must be installed in an
easily accessible position to facili-
tate inspection or replacement.
– It is recommended that shut-off
devices be fitted before and after
the pump. This will save having to
drain and refill the system if the
pump needs replacing. The fittings
are to be installed so that any water
that escapes cannot drip onto the
pump motor or terminal box.
– When installed into the flow pipe of
an open-vented system, the open
safety vent must be connected to
the system on the inlet side of the
pump.
ATTENTION!

18
ENGLISH
– Pump to be mounted with the shaft
in the horizontal plane in such a
way that it is not stressed by the
pipework. (Installation positions in
Fig. 2).
– An arrow on the pump casing indi-
cates the direction of flow (Fig. 3,
pos.1).
– Secure the pump against twisting
by using a spanner (Fig. 4).
– In order to attain the correct termi-
nal box position the motor housing
can be turned once the motor
fastening screws have been lose-
ned (Fig. 5). Do not damage the flat
gasket. If necessary
use a new gasket:
Ø86 x Ø76x2.0 mm EP.
For units whichareto
be insulated, only the
pump housing may be
insulated. The motor
and condensate ope-
nings must remain free
(Fig. 3, pos. 2).
Electrical connection
Electrical connection must be
carried out by a qualified and
licensed electrician in strict
conformity to ruling national
conditions and local regulati-
ons (e.g. VDE regulations in
Germany).
– According to Part 1 of the VDE 0730,
the pump must be connected to the
electrical supply by a solid wire
equipped with a plug connection or
an all-pole switch. The width of the
contact gap must be at least 3 mm.
– To guarantee protection against
dripping water and the strain relief
of the PG screwed joint, a connec-
ting cable of suitable external dia-
meter is to be used (e.g. H 05 VV-F
3 G 1.5).
– When using the pump in units
where the water temperature
exceeds 90 °C, a connecting cable
with corresponding heat resistance
must be used.
– The supply cable must be laid in
such a way that it never touches the
pipework and/or the pump and
motor casing.
–Check that the mains current and
voltage comply with the data on the
rating plate.
– Make mains connection as shown
in Fig. 6.
– The connecting cable can be fed
through the PG screwed joint either
to the left or right. If necessary, the
blind plug and PG screwed joint are
to be exchanged. If the terminal box
is positioned on the side, always
insert the PG screwed joint from
below (Fig. 5)
Caution risk of short-circuit!
After electrical connections
the terminal box cover must
be closed properly, to protect
against moisture.
– Pump/installation must be earthed
in compliance with regulations.
– When connecting automatic switch-
gear (for double pumps), follow the
appropriate Installation and
Operating Instructions.
ATTENTION!
ATTENTION!

19
ENGLISH
6 Operation
System filling and venting
The pump may need venting e.g. if the
heating and pump are working but the
heating element remains cold. If there
is air in the pump chamber, the pump
will not pump water.
Carefully fill the unit with water.
Solar thermal systems must be filled
with ready for use mixtures. The pump
must not be used to mix the medium
in the system.
The pump is normally vented automa-
tically after a short operatinal period.
Short-term dry running will not dama-
ge the pump. If it becomes necessary
to vent the pump, please observe the
following procedure:
– Switch off pump,
Risk of burning if the pump
is touched!
Depending on the operating
condition of the pump and/or
installation (fluid temperature)
the pump/motor can become
very hot.
– Close the valve on the discharge
side.
Risk of scalding!
Depending on the fluid tem-
peratureand the system pres-
sure, if the vent screw is com-
pletely loosened hot liquid or
vapour can escape or even
shoot out at high pressure.
– Carefully loosen and fully remove
the vent plug with a suitable
screwdriver (Fig. 9).
– Carefully push pump shaft back
several times with screwdriver.
– Protect all electrical parts against
the leaking water.
– Switch-on pump.
It is possible that the
pump blocks with the
vent plug open, de-
pending on the system
pressure.
– After 15...30 s tighten the vent plug.
– Re-open isolating valve,
Speed setting
If the rooms cannot be sufficiently
heated, the speed of the pump may be
too low. In this case you will need to
switch to a higher speed.
If, on the other hand, the pump is set
at too high a speed, flow noise may
occur in the lines and in particular at
throttled thermostatic valves. This can
be rectified by switching to a lower
speed.
The speed is changed by means of
a rotary button at the terminal box.
3 represents the lowest and 1 the
highest speed.
7 Maintenance
Prior maintenance or repair
work switch off the pump and
secure against unauthorized
switching.
ATTENTION!

20
ENGLISH
8 Problems, Causes
and Remedies
Motor is switched on but fails to
run:
– Check electrical fuses,
– Check voltage of pump (observe
rating plate data),
– Check capacitor size (observe
rating plate data!).
–Motor is blocked, e.g. by deposits
from the heating water.
– Remedies: Fully remove vent plug,
check and if necessary rectify free
running of pump rotor by turning
the slotted end of the shaft with a
screwdriver (Fig. 9).
At high water temperatures
and system pressure close
isolating valves before and
after the pump. First, allow
pump to cool down
Noisy pump operation
– Cavitation due to insufficient inlet
pressure.
– Remedies: increase system pressu-
rewithin the permissible range.
–Check speed setting, if necessary
switch to a lower speed.
If the fault cannot be rectified,
contact your nearest WILO
Customer Service.
9 Spare parts
All rating plate data must be stated
when ordering spare parts.
Subject to technical alterations!

154

155
DEG - Konformitätserklärung
GB EC – Declaration of conformity
FDéclaration de conformité CE
Hiermit erklären wir, dass die Bauarten der Baureihe : Star RS
Herewith, we declare that this product: Star RSD
Par le présent, nous déclarons que cet agrégat : Star RSG
Star ST
Star AC
in der gelieferten Ausführung folgenden einschlägigen Bestimmungen entspricht:
in its delivered state complies with the following relevant provisions:
est conforme aux dispositions suivants dont il relève:
Elektromagnetische Verträglichkeit - Richtlinie 2004/108/EG
Electromagnetic compatibility - directive
Compatibilité électromagnétique- directive
Niederspannungsrichtlinie 2006/95/EG
Low voltage directive
Directive basse-tension
und entsprechender nationaler Gesetzgebung.
and with the relevant national legislation.
et aux législations nationales les transposant.
Angewendete harmonisierte Normen, insbesondere: EN 1050
Applied harmonized standards, in particular: EN 61000-6-1
Normes harmonisées, notamment: EN 61000-6-2
EN 61000-6-3
EN 61000-6-4
EN 61335-2-51
Bei einer mit uns nicht abgestimmten technischen Änderung der oben genannten Bauarten, verliert diese Erklärung ihre Gültigkeit.
If the above mentioned series are technically modified without our approval, this declaration shall no longer be applicable.
Si les gammes mentionnées ci-dessus sont modifiées sans notre approbation, cette déclaration perdra sa validité.
Dortmund, 07.11.2008
Erwin Prieß
Quality Manager
WILO SE
Nortkirchenstraße 100
44263 Dortmund
Germany
D

156
NL EG-verklaring van overeenstemming
Hiermede verklaren wij dat dit aggregaat in de
geleverde uitvoering voldoet aan de volgende
bepalingen:
Elektromagnetische compatibiliteit 2004/108/EG
EG-laagspanningsrichtlijn 2006/95/EG
Gebruikte geharmoniseerde normen, in het
bijzonder: 1)
IDichiarazione di conformità CE
Con la presente si dichiara che i presenti prodotti
sono conformi alle seguenti disposizioni e
direttive rilevanti:
Compatibilità elettromagnetica 2004/108/EG
Direttiva bassa tensione 2006/95/EG
Norme armonizzate applicate, in particolare: 1)
EDeclaración de conformidad CE
Por la presente declaramos la conformidad del
producto en su estado de suministro con las
disposiciones pertinentes siguientes:
Directiva sobre compatibilidad electromagnética
2004/108/EG
Directiva sobre equipos de baja tensión
2006/95/EG
Normas armonizadas adoptadas, especialmente: 1)
PDeclaração de Conformidade CE
Pela presente, declaramos que esta unidade no
seu estado original, está conforme os seguintes
requisitos:
Compatibilidade electromagnética 2004/108/EG
Directiva de baixa voltagem2006/95/EG
Normas harmonizadas aplicadas, especialmente: 1)
SCE- försäkran
Härmed förklarar vi att denna maskin i levererat
utförande motsvarar följande tillämpliga
bestämmelser:
EG–Elektromagnetisk kompatibilitet – riktlinje
2004/108/EG
EG–Lågspänningsdirektiv 2006/95/EG
Tillämpade harmoniserade normer, i synnerhet: 1)
NEU-Overensstemmelseserklæring
Vi erklærer hermed at denne enheten i utførelse
som levert er i overensstemmelse med følgende
relevante bestemmelser:
EG–EMV–Elektromagnetisk kompatibilitet
2004/108/EG
EG–Lavspenningsdirektiv 2006/95/EG
Anvendte harmoniserte standarder, særlig: 1)
FIN CE-standardinmukaisuusseloste
Ilmoitamme täten, että tämä laite vastaa seuraavia
asiaankuuluvia määräyksiä:
Sähkömagneettinen soveltuvuus 2004/108/EG
Matalajännite direktiivit: 2006/95/EG
Käytetyt yhteensovitetut standardit, erityisesti: 1)
DK EF-overensstemmelseserklæring
Vi erklærer hermed, at denne enhed ved levering
overholder følgende relevante bestemmelser:
Elektromagnetisk kompatibilitet: 2004/108/EG
Lavvolts-direktiv 2006/95/EG
Anvendte harmoniserede standarder, særligt: 1)
HEK. Azonossági nyilatkozat
Ezennel kijelentjük,hogy az berendezés az
alábbiaknak megfelel:
Elektromágneses zavarás/türés: 2004/108/EG
Kisfeszültségü berendezések irány-Elve:
2006/95/EG
Felhasznált harmonizált szabványok, különösen: 1)
CZ Prohlášení o shodĈEU
Prohlašujeme tímto, •e tento agregát v dodaném
provedení odpovídá následujícím pįíslušným
ustanovením:
SmĈrnicím EU–EMV 2004/108/EG
SmĈrnicím EU–nízké napĈtí 2006/95/EG
Pou•ité harmonizaüní normy, zejména: 1)
PL Deklaracja Zgodnoıci CE
Niniejszym deklarujemy z peğnö
odpowiedzialnosciöŅedostarczony wyrób jest
zgdony z nastĆpujöcymi dokumentami:
Odpowiednioıø elektromagnetyczna
2004/108/EG
Normie niskich napiĆø 2006/95/EG
Wyroby sözgodne ze szczegóğowymi normami
zharmonizowanymi: 1)
RUS ƟǀDždžƻǑǃǚ lj njljljǍƽǀǍnjǍƽǃǃ
ƠƽNjljNJǀDŽnjDžǃLJ LjljNjLJƻLJ
ƨƻnjǍljǚǔǃLJ ƿljDžǎLJǀLjǍljLJ ǂƻǚƽdžǚǀLJ,ǒǍlj ƿƻLjLjǖDŽ
ƻƾNjǀƾƻǍ ƽ ǀƾlj ljƼǕǀLJǀ NJljnjǍƻƽDžǃ njljljǍƽǀǍnjǍƽǎǀǍ
njdžǀƿǎǙǔǃLJ LjljNjLJƻǍǃƽLjǖLJ ƿljDžǎLJǀLjǍƻLJ:
ƸdžǀDžǍNjljLJƻƾLjǃǍLjƻǚ ǎnjǍljDŽǒǃƽljnjǍǗ 2004/108/EG
ƟǃNjǀDžǍǃƽǖ NJlj LjǃǂDžljƽljdžǗǍLjljLJǎ LjƻNJNjǚǁǀLjǃǙ
2006/95/EG
ƣnjNJljdžǗǂǎǀLJǖǀ njljƾdžƻnjljƽƻLjLjǖǀ njǍƻLjƿƻNjǍǖ ǃ
LjljNjLJǖ,ƽ ǒƻnjǍLjljnjǍǃ : 1)
GR ŕŮŻƇƁŷ ½ſžƁűſpžųŮƀ Ƃŷƀ Ŗ.Ŗ.
ŕŷŻƌżžƃpŵ ƊƂŹ Ƃž ½ſžƈƊż űƃƂƊ Ɓ’űƃƂŮ Ƃŷż
źűƂŬƁƂűƁŷ ½űſŬŴžƁŷƀ Źźűżž½žŹŵů ƂŹƀ űźƊŻžƃŸŵƀ
ŴŹűƂŬŽŵŹƀ :
ŘŻŵźƂſžpűųżŷƂŹźŮ ƁƃpŲűƂƊƂŷƂű EG-
2004/108/EG
ŠŴŷųůű ƅűpŷŻŮƀ ƂŬƁŷƀ EG–2006/95/EG
ŖżűſpžżŹƁpŭżű ƅſŷƁŹpž½žŹžƋpŵżű ½ſƊƂƃ½ű,
ŹŴŹűůƂŵſű:1)
TR EC Uygunluk Teyid Belgesi
Bu cihazınteslim edildiĊiijekliyle aijaĊıdaki
standartlara uygun olduĊunu teyid ederiz:
Elektromanyetik Uyumluluk 2004/108/EG
Alçak gerilim direktifi 2006/95/EG
Kısmen kullanılan standartlar: 1)
1) EN 1050,
EN 61000-6-1
EN 61000-6-2,
EN 61000-6-3,
EN 61000-6-4,
EN 60335-2-51.
Erwin Prieß
Quality Manager
WILO SE
Nortkirchenstraße 100
44263 Dortmund
Germany
Декларация о соответствии

N
L
N
L
N
L
N
L
/
/
1 230 V
50 Hz
a
bc
N
L
WILO SE
Nortkirchenstraße 100
44263 Dortmund
Germany
T [phone]
F [phone]
[email protected]
www.wilo.com
Wilo – International (Subsidiaries)
Wilo – International (Representation offices)
Argentina
WILO SALMSON
Argentina S.A.
C1270ABE Ciudad
Autónoma de Buenos Aires
T [phone]
[e-mail]
Austria
WILO Pumpen
Österreich GmbH
1230 Wien
T [phone]
[email protected]
Azerbaijan
WILO Caspian LLC
1065 Baku
T [phone]
[email protected]
Belarus
WILO Bel OOO
220035 Minsk
T [phone]
[email protected]
Belgium
WILO SA/NV
1083 Ganshoren
T [phone]
[email protected]
Bulgaria
WILO Bulgaria Ltd.
1125 Sofia
T [phone]
[email protected]
Canada
WILO Canada Inc.
Calgary, Alberta T2A 5L4
T [phone]
[email protected]
China
WILO China Ltd.
101300 Beijing
T [phone]
[email protected]
Croatia
WILO Hrvatska d.o.o.
10090 Zagreb
T [phone]
[email protected]
Czech Republic
WILO Praha s.r.o.
25101 Cestlice
T [phone]
[email protected]
Denmark
WILO Danmark A/S
2690 Karlslunde
T [phone]
[email protected]
Estonia
WILO Eesti OÜ
12618 Tallinn
T [phone]
[email protected]
Finland
WILO Finland OY
02330 Espoo
T [phone]
[email protected]
France
WILO S.A.S.
78390 Bois d'Arcy
T [phone]
[email protected]
Great Britain
WILO (U.K.) Ltd.
DE14 2WJ Burton-
Upon-Trent
T [phone]
[email protected]
Greece
WILO Hellas AG
14569 Anixi (Attika)
T [phone]
[email protected]
Hungary
WILO Magyarország Kft
2045 Törökbálint
(Budapest)
T [phone]
[email protected]
Ireland
WILO Engineering Ltd.
Limerick
T [phone]
[email protected]
Italy
WILO Italia s.r.l.
20068 Peschiera Borromeo
(Milano)
T [phone]
[email protected]
Kazakhstan
WILO Central Asia
050002 Almaty
T [phone]
[email protected]
Korea
WILO Pumps Ltd.
621-807 Gimhae
Gyeongnam
T [phone]
[email protected]
Latvia
WILO Baltic SIA
1019 Riga
T [phone]
[email protected]
Lebanon
WILO SALMSON
Lebanon
12022030 El Metn
T [phone]
[email protected]
Lithuania
WILO Lietuva UAB
03202 Vilnius
T [phone]
[email protected]
The Netherlands
WILO Nederland b.v.
1551 NA Westzaan
T [phone]
[email protected]
Norway
WILO Norge AS
0975 Oslo
T [phone]
[email protected]
Poland
WILO Polska Sp. z.o.o.
05-090 Raszyn
T [phone]
[email protected]
Portugal
Bombas Wilo-Salmson
Portugal Lda.
4050-040 Porto
T [phone]
[email protected]
Romania
WILO Romania s.r.l.
077040 Com. Chiajna Jud.
Ilfov
T [phone]
[email protected]
Russia
WILO Rus ooo
123592 Moscow
T [phone]
[email protected]
Saudi Arabia
WILO ME - Riyadh
Riyadh 11465
T [phone]
[email protected]
Serbia and Montenegro
WILO Beograd d.o.o.
11000 Beograd
T [phone]
[e-mail]
Slovakia
WILO Slovakia s.r.o.
82008 Bratislava 28
T [phone]
[email protected]
Slovenia
WILO Adriatic d.o.o.
1000 Ljubljana
T [phone]
[email protected]
South Africa
Salmson South Africa
1610 Edenvale
T [phone]
errol.cornelius@
salmson.co.za
Spain
WILO Ibérica S.A.
28806 Alcalá de Henares
(Madrid)
T [phone]
[email protected]
Sweden
WILO Sverige AB
35246 Växjö
T [phone]
[email protected]
Switzerland
EMB Pumpen AG
4310 Rheinfelden
T [phone]
[email protected]
Taiwan
WILO-EMU Taiwan Co. Ltd.
110 Taipeh
T [phone]
nelson.wu@
wiloemutaiwan.com.tw
Turkey
WILO Pompa Sistemleri
San. ve Tic. A.S¸.
34530 Istanbul
T [phone]
[email protected]
Ukraina
WILO Ukraina t.o.w.
01033 Kiew
T [phone]
[email protected]
Vietnam
Pompes Salmson Vietnam
Ho Chi Minh-Ville Vietnam
T [phone]
[email protected]
United Arab Emirates
WILO ME - Dubai
Dubai
T [phone]
[email protected]
USA
WILO-EMU USA LLC
Thomasville,
Georgia 31792
T [phone]
[email protected]
USA
WILO USA LLC
Melrose Park, Illinois 60160
T [phone]
mike.easterley@
wilo-na.com
Algeria
Bad Ezzouar, Dar El Beida
T [phone]
Armenia
375001 Yerevan
T [phone]
Bosnia and Herzegovina
71000 Sarajevo
T [phone]
Georgia
0179 Tbilisi
T [phone]
Macedonia
1000 Skopje
T [phone]
Mexico
07300 Mexico
T [phone]
Moldova
2012 Chisinau
T [phone]
Rep. Mongolia
Ulaanbaatar
T [phone]
Tajikistan
734025 Dushanbe
T [phone]
Turkmenistan
744000 Ashgabad
T [phone]
Uzbekistan
100015 Tashkent
T [phone]
January 2009

4131013-Ed.01/2009-02 DDD
Wilo-Star RS, RSD, ST, RSG, AC
D Einbau- und Betriebsanleitung
GB Installation and operating instructions
F Notice de montage et de mise en service
NL Montage- en bedieningsvoorschrift
I Istruzioni di montaggio, uso e manutenzione
E Instrucciones de instalación y funcionamiento
S Installations- och skötselinstruktioner
FIN Huolto- ja käyttöohje
HBeépítési és üzemeltetési utasítás
PL Instrukcja montażu i obsługi
CZ Návod k montáži a obsluze
SK Návod na montáža obsluhu
RO Instrucfliuni de montaj øi expolatare
GR Οδηγίες εγκατάστασης και λειτουργίας
RUS Инструкция по монтажу и експлуатации
LT Montavimo ir naudojimo instrukcija
LV Uzstādīšanas un ekspluatācijas instrukcija
UK Інструкція по монтажу та експлуатації
TR Montaj ve kullanma kılavuzu
WILO SE
Nortkirchenstraße 100
44263 Dortmund
Germany
T 0231 4102-0
F 0231 4102-7363
[email protected]
www.wilo.de
G1 Nord
WILO SE
Vertriebsbüro Hamburg
Beim Strohhause 27
20097 Hamburg
T 040 5559490
F 040 55594949
[email protected]
G2 Ost
WILO SE
Vertriebsbüro Berlin
Juliusstraße 52–53
12051 Berlin-Neukölln
T 030 6289370
F 030 62893770
[email protected]
G3 Sachsen/Thüringen
WILO SE
Vertriebsbüro Dresden
Frankenring 8
01723 Kesselsdorf
T 035204 7050
F 035204 70570
[email protected]
G4 Südost
WILO SE
Vertriebsbüro München
Adams-Lehmann-Straße 44
80797 München
T 089 4200090
F 089 42000944
[e-mail]
G5 Südwest
WILO SE
Vertriebsbüro Stuttgart
Hertichstraße 10
71229 Leonberg
T 07152 94710
F 07152 947141
[email protected]
G6 Rhein-Main
WILO SE
Vertriebsbüro Frankfurt
An den drei Hasen 31
61440 Oberursel/Ts.
T 06171 70460
F 06171 704665
[email protected]
G7 West
WILO SE
Vertriebsbüro Düsseldorf
Westring 19
40721 Hilden
T 02103 90920
F 02103 909215
[e-mail]
Kompetenz-Team
Gebäudetechnik
WILO SE
Nortkirchenstraße 100
44263 Dortmund
T 0231 4102-7516
T 01805 R•U•F•W•I•L•O*
7•8•3•9•4•5•6
F 0231 4102-7666
Kompetenz-Team
Kommune
Bau + Bergbau
WILO EMU GmbH
Heimgartenstraße 1
95030 Hof
T 09281 974-550
F 09281 974-551
Werkskundendienst
Gebäudetechnik
Kommune
Bau + Bergbau
Industrie
WILO SE
Nortkirchenstraße 100
44263 Dortmund
T 0231 4102-7900
T 01805 W•I•L•O•K•D*
9•4•5•6•5•3
F 0231 4102-7126
[email protected]
Erreichbar Mo–Fr von
7–17 Uhr.
Wochenende und feier-
tags 9–14 Uhr elektro-
nische Bereitschaft mit
Rückruf-Garantie!
– Kundendienst-
Anforderung
– Werksreparaturen
– Ersatzteilfragen
– Inbetriebnahme
– Inspektion
– Technische Service-
Beratung
– Qualitätsanalyse
Wilo-International
Österreich
Zentrale Wien:
WILO Pumpen
Österreich GmbH
Eitnergasse 13
1230 Wien
T [phone]
F [phone]
Vertriebsbüro Salzburg:
Gnigler Straße 56
5020 Salzburg
T [phone]
F [phone]
Vertriebsbüro
Oberösterreich:
Trattnachtalstraße 7
4710 Grieskirchen
T [phone]
F [phone]
Schweiz
EMB Pumpen AG
Gerstenweg 7
4310 Rheinfelden
T [phone]
F [phone]
Standorte weiterer
Tochtergesellschaften
Argentinien,
Aserbaidschan, Belarus,
Belgien, Bulgarien, China,
Dänemark, Estland,
Finnland, Frankreich,
Griechenland, Groß-
britannien, Irland, Italien,
Kanada, Kasachstan, Korea,
Kroatien, Lettland, Libanon,
Litauen, Niederlande,
Norwegen, Polen, Portugal,
Rumänien, Russland,
Saudi-Arabien, Schweden,
Serbien und Montenegro,
Slowakei, Slowenien,
Spanien, Südafrika, Taiwan,
Tschechien, Türkei,
Ukraine, Ungarn, Vereinigte
Arabische Emirate,
Vietnam, USA
Die Adressen finden Sie
unter www.wilo.de oder
www.wilo.com.
Stand Januar 2009
Wilo-Vertriebsbüros in Deutschland
Erreichbar Mo–Fr von 7–18 Uhr.
– Antworten auf
– Produkt- und Anwendungsfragen
– Liefertermine und Lieferzeiten
– Informationen über Ansprechpartner vor Ort
– Versand von Informationsunterlagen
* 14 Cent pro Minute aus dem deutschen
Festnetz der T-Com. Bei Anrufen aus
Mobilfunknetzen sind Preisabweichungen
möglich.