WilTec AF189A User manual

Operation Manual
Airbrush Compressor AF189A
34245
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

© by WilTec Wildanger Technik GmbH Item 34245 Page 2
http://www.WilTec.de
http://www.aoyue.eu 06 2021-1
http://www.teichtip.de
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously or
placing your order via the webshop.
E-mail: [e-mail]
Tel:[phone]
Fax: [phone]
To return orders for exchange, repair or for other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: [email protected]o
Tel:[phone]
Fax: [phone]

© by WilTec Wildanger Technik GmbH Item 34245 Page 3
http://www.WilTec.de
http://www.aoyue.eu 06 2021-1
http://www.teichtip.de
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety guideline
BEWARE:
The use of this device is allowed only with fault current protection switch with a triggering nominal current
up to 30 mA (according to VDE 0100 Article 702 and 738).
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised by
a person responsible for their safety or the follow the instructions, made by this person on how to use
the device correctly. Children should be supervised to make sure that they do not play with the device.
CAUTION:
•The head of the compressor (with cooling fins) can get very hot.
•Run a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
•Use the device exclusively according to the intended purpose stated in the manual.
•You are responsible for the safety of the working environment.
•If the cable or the plug is damaged due to external influences, the cable must not be repaired,
but has to be replaced with a new one. This work can only be carried out by an electrician.
•The 230 V alternating voltage indicated on the type plate of the device has to correspond to the
existent mains voltage.
•Never lift, carry or fix the device by using the power cable.
•Make sure that the electrical plug connection is protected from flood and moisture.
•Disconnect the mains plug before starting any maintenance, repair, or cleaning.
•The user is responsible for complying with the location specific safety and mounting regulations.
Ask an electrician, if necessary.
•In case of device failure, the repairs can only be carried out by an electrician.
SAFETY GUIDELINES:
•The user should choose the right compressor with the appropriate air volume and air pressure
to correspond to the actual work requirements.
•Never expose the device to dust, acid, steam, explosive or flammable gases, or atmospheric
influences (rain, sun, fog, snow).
•The vacuum pump can be operated only in an appropriate environment (good ventilation, am-
bient temperature of +5–+40 ℃).
•Never use the compressor barefoot or with wet hands or feet.
•Never allow children to touch the switched-on compressor or to insert the plug. It may cause
burns or electric shocks.
•Do not open or damage any compressor part. If necessary, please contact your seller.
•Always release the water by opening the drain valve before not using the compressor for a long
time. Store the compressor in a well-ventilated place.
•Always wear goggles. Under no circumstances direct the airflow towards your body or other
persons’ bodies or animals.
•Never use the device in areas with steam or moisture or close to water.

© by WilTec Wildanger Technik GmbH Item 34245 Page 4
http://www.WilTec.de
http://www.aoyue.eu 06 2021-1
http://www.teichtip.de
•Switch off the compressor if you do not use it. Disconnect it from mains before you repair, re-
condition, maintain, clean or replace parts. Never use the power cable as handle. Keep the
power cable away from hot objects, oil and sharp edges. Protect it against breakage. Do not
pull the power cable in order to unplug it from the power socket.
•If the compressor is used outdoors, only approved extensions may be used. Every wire of the
extension cable must have at least 1,5 mm² cross-section.
•Do not store the compressor with the plug inserted into the socket. Do not allow children or any
other people who are not able to handle this device to play or work with it.
•Be very careful when you are working with the compressor. Do not use it if you are tired. Persons
under the influence of alcohol, drugs or medication are not allowed to use this device.
•When you start working make sure that all screws are tightened.
•Do not use the compressor if it is damaged. If the compressor generates unusual noises and
strong vibrations or if other unusual signs occur that indicate some damage you should turn off
the compressor immediately. For repairs, please use only original spare parts. Do not make any
technical modifications to the compressor. In case you cannot eliminate the malfunction hand
over the device to an expert.
Features
•Air tank supplies constant airflow without pressure loss
•Without oil, piston compressor, no untidy air
•With water filter, pressure adjustment and manometer
•Double air pressure-switch:
◦1st switch: Low-pressure auto-stop switch for airbrushing,
auto-stop at 4 bar
◦2nd switch: High-pressure switch without stop function, for
other high pressure air tools, maximum pressure at 6 bar
•Automatic start without counter pressure extends the stability of the engine.
•Protection against excessive temperature
•Safety device for the air tank.
•Very low noise level
Construction
№
Name
a
Plug
b
Pressure regulator
c
Pressure gauge
d
Air connection
e
Drainage

© by WilTec Wildanger Technik GmbH Item 34245 Page 5
http://www.WilTec.de
http://www.aoyue.eu 06 2021-1
http://www.teichtip.de
Fields of application
The AS196AW Airbrush is among others suitable for the operation in the following areas:
•crafts,
•hobby,
•modelling,
•tattoos and body art,
•make-up and nail design,
•as a source of air in the medical field,
•in food and chemical industries,
•in laboratories etc.
Technical specifications
Type
Piston compressor with housing
Power (W)
125 W (⅙hp)
Rotation speed (rpm)
1450–1700
Noise level (㏈(A))
approx. 47
Stanrad volume (ℓ⁄min)
20
Double switch
1st switch: auto-start at 3 bar, auto-stop at 4 bar
2nd switch: max. pressure 6 bar, no auto-stop
Pressure adjustment range (㍴)
0–4
Real continuous operation pressure (㍴)
0.35–2.5
Air tank (ℓ)
3
Weight (㎏)
8.4
Size (㎜)
310×135×360
Cable length (m)
1.9
Nozzles
Suitable for all kinds of nozzles from 0.2 to 1.0 mm
Notes:
•The compressor has a 9,51 mm outlet (⅛″, male thread), which can be effortlessly changed to
¼″. The matching adapter is not included in the supply.
•When the compressor is connected by the hose to the airbrush gun, the compressor can be
connected to the mains and be switched on.
•The maximum pressure is displayed by the pressure gauge, the operating pressure can be
adjusted by the pressure regulator.
•The hose included is air-impermeable. If the auto-stop mode is activated (repeatedly switch
on/off) any and all screw fittings and connections should be sealed by a teflon tape.
Leakage control
•Switch on the compressor and wait until the maximum pressure has built up and the auto-stop
function has been activated.
•If there is no leakage, the pressure gauge should display nearly constantly the same range of
pressure.
•A quick decrease of the range of pressure suggests that there is in fact a leakage.
•It is of great importance to seal any leak as soon as possible in order to avoid any impact on
the capacity and efficiency of the compressor.

© by WilTec Wildanger Technik GmbH Item 34245 Page 6
http://www.WilTec.de
http://www.aoyue.eu 06 2021-1
http://www.teichtip.de
•A leak causes the auto-stop and auto-start function to be carried out permanently.
Difference between maximum and operating pressure
•The maximum pressure is the highest possible pressure a compressor can generate.
•Once the maximum pressure has been reached, the compressor switches off (auto-stop). As
soon as the pressure starts to decrease, it switches on again (auto-start).
•Maximum pressure is the pressure measured inside the compressor.
•There is a lower pressure on the outlet of the compressor. The pressure you actually work with
remains. The operating pressure may vary according to the connected airbrush gun.
Pressure regulator AFR-2000 with water separator and pressure gauge
№
Name
a
Pressure regulator
b
Pressure gauge
c
Water drain plug
Product name:Pressure regulator with filter and pressure gauge
Type: AFR-2000
Features:
With the AFR-2000 pressure regulator, you can control and adjust the pressure, and it assures a stable
air pressure. Le pressure gauge indicates the working pressure (up to 9 bar). The water separator with
filter provides for a dry and clean air. The transparent filter cap allows visually control of the condensed
water. The separated water is drained by turning the water drain plug.
Operation:
•The pressure gauge reports the air tool working pressure.
•Pull up the adjusting knob; its being clockwise rotated increases the pressure, a counter-clock-
wise rotation reduces the pressure.
•Rotate the adjusting knob to achieve the right working pressure and lock it downwards by click-
ing it into place.
•Do not rotate the knob against high resistance. If necessary, the height and the position of the
of the knob can vary slightly.
•For emptying the condensed water collector use the water drain plug.

© by WilTec Wildanger Technik GmbH Item 34245 Page 7
http://www.WilTec.de
http://www.aoyue.eu 06 2021-1
http://www.teichtip.de
Exploded view and parts list
№
Name
Qty.
№
Name
Qty.
1
Screw
8
27
Cylinder head
1
2
Rear cover
1
28
Cap screw
4
3
Block
1
29
Filter valve
1
4
Rear body
1
30
Handle
1
5
Screw
4
31
Pressure switch
1
6
Stationary motor
1
32
Water drain valve
1
7
Bearing
2
33
Condenser
1
8
Rotary motor
1
34
Power switch
1
9
Front body
1
35
Wire
1
10
Counterweight
1
36
Rubber pad
4
11
Pressure gauge
1
37
Hexagon nut
1
12
Bearing
1
38
Connector
2

© by WilTec Wildanger Technik GmbH Item 34245 Page 8
http://www.WilTec.de
http://www.aoyue.eu 06 2021-1
http://www.teichtip.de
13
Retainer ring
1
39
Link
2
14
Compression ring
1
40
Adaptor
1
15
Pipe
1
41
Pressure regulator
1
16
Solenoid valve
1
42
Tank
1
17
Cylinder
1
43
Three-way bend
1
18
Valve plate
2
44
Three-way bend
1
19
O-Ring
1
45
Non-return valve
1
20
Screw
1
46
Pipe nut
2
21
Front gasket
1
47
Plug
1
22
Front cover
1
48
Safety valve
1
23
Filter
1
49
Adaptor
1
24
O-Ring
1
50
Screw
1
25
Cylinder block
1
51
Drain valve
1
26
O-Ring
1
52
Muffle
1

© by WilTec Wildanger Technik GmbH Item 34245 Page 9
http://www.WilTec.de
http://www.aoyue.eu 06 2021-1
http://www.teichtip.de
Disposal regulations
EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2012/19/EU) were imple-
mented in the law related to electrical and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out
wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the
domestic waste.
The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE-
registration number DE45283704.
Disposal of used electrical and electronic appliances
(intended for use in the countries of the European Un-
ion and other European countries with a separate col-
lection system for these appliances).
The logo on the article or on its packaging points out
that this article must not be treated as normal house-
hold waste but must be disposed to a recycling collec-
tion point for electronic and electrical waste equipment.
By contributing to the correct disposal of this article you
protect the environment and the health of your fellow
men. Environment and health are threatened by inap-
propriate disposal.
Material recycling helps reduce the consumption of raw materials.
Additional information on recycling this article can be provided by your local community, municipal waste
disposal facilities or the store where you purchased the article.
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
D-52249 Eschweiler
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction
manual require the written permission of WilTec Wildanger Technik GmbH.