WilTec 50144 User manual

Operation Manual
Push Broadcast Spreader
50144
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificant-
ly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

© by WilTec Wildanger Technik GmbH Item 50144 Page 2
http://www.WilTec.de
http://www.aoyue.eu 09 2021-1
http://www.teichtip.de
The information contained in this document may alter at any time without previous notice. It is prohibit-
ed to copy or spread any parts of this document in any way without prior written allowance. All rights
reserved.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously
or placing your order via the webshop.
E-mail: [e-mail]
Tel:[phone]
Fax: [phone]
To return orders for exchange, repair or for other purposes, please use the following address. Atten-
tion! To allow for a smooth execution of your complaint or return, it is important to contact our custom-
er service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: [email protected]o
Tel:[phone]
Fax: [phone]

© by WilTec Wildanger Technik GmbH Item 50144 Page 3
http://www.WilTec.de
http://www.aoyue.eu 09 2021-1
http://www.teichtip.de
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation
instructions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
•Before use, read the safety information and instructions in this manual carefully. Failure to ob-
serve the information can lead to injuries and property damage.
•Make sure that the screw connection is tight during assembly to ensure safe use.
•Check the spreader for damage before each use. Do not use it if it is defective.
•The spreader is intended for private use only. It is not suitable for commercial or industrial use.
•Warning! This device may be used by people with limited physical, sensory or mental
capabilities or a lack of experience or the necessary specialist knowledge if they have been in-
troduced to the use of the device and are supervised by a person who is familiar with the de-
vice.
•Read the safety information for towing vehicle owners and towing vehicles. Know how to op-
erate your tractor before using the spreader.
•Children must not use the device and must be supervised in its vicinity to ensure that they do
not play with the device.
•Read the safety instructions for towing vehicle owners and towing vehicles. Know how to op-
erate your tractor before using the spreader.
•Wear appropriate protection, for example protective glasses, protective goggles, safety shoes,
etc.
•Keep body parts away from moving parts.
•When towing the spreader, do not drive too close to a stream or ditch and watch out for holes
and other hazards that could cause you to lose control of the spreader and tractor.
•Only use the spreader if it is safe to stand and in a stable working position. Pay particular at-
tention to safe use on black ice and in wet weather.
•The spreader is designed exclusively for spreading fertilizers, seeds or road salt. The use of
other filling materials is not permitted and contradicts proper use.
•When spreading fertilizer and road salt, observe the local regulations and the safety instruc-
tions from the grit manufacturer.
•Do not use the spreader near other people or animals.
•Only use the spreader at walking pace.
•Do not use the spreader in rain or strong wind. Never leave it out in the rain.

© by WilTec Wildanger Technik GmbH Item 50144 Page 4
http://www.WilTec.de
http://www.aoyue.eu 09 2021-1
http://www.teichtip.de
Parts list
№
Name
Qty.
№
Name
Qty.
1
Hopper
1
11
Cotter pin
1
1-1
Control cable
1
12
Screw M6×35
1
2
wheel
2
14
Screw M6×50
5
3
Spinner disc
1
15
Large flat washer
1
3-1
Gear casing
1
16
Small flat washer
15
4
Steering link connector
2
17
Lock washer
2
5
Rear hopper support
2
18
Hex nut M6
14
6
Right hopper support
1
19
Screw M6×55
1
7
Left hopper support
1
20
Release pin
1
8
Split bushing
2
21
Screw M6×40
8
9
Front bracket
1
22
Cable lock nut
1
10
Axle
1
23
Slot
1

© by WilTec Wildanger Technik GmbH Item 50144 Page 5
http://www.WilTec.de
http://www.aoyue.eu 09 2021-1
http://www.teichtip.de
Assembly
Step 1: gear casing and axles
№
Name
Qty.
3-1
Gear casing
1
10
Axle
1
12
Screw M6×35
1
16
Small flat washer
1
18
Hex nut M6
1
Push the axle (10) through the gear casing (3-1)
and secure it with the M6×35 screw (12), the
small washer (16) and the hexagon nut (18).
Step 2: Frame and axle
№
Name
Qty.
5
Rear hopper support
2
6
Right hopper support
1
7
Left hopper support
1
14
Screw M6×50
4
16
Small flat washer
4
18
Hex nut M6
4
Fasten the rear hopper supports (5) to the right
hopper support (6) and the left hopper sup-
port (7), using the M6×50 screw (14), small
washer (16) and hexagon nut (18) as shown in
the figure above.

© by WilTec Wildanger Technik GmbH Item 50144 Page 6
http://www.WilTec.de
http://www.aoyue.eu 09 2021-1
http://www.teichtip.de
Step 3
№
Name
Qty.
9
Front bracket
1
21
Screw M6×40
2
16
Small flat washer
2
18
Hex nut M6
2
Fasten the front bracket (9) with the M6×40
screw (21), small washer (16) and M6 hexa-
gon nut (18) to the right support (6) and left
hopper support (7).
Step 4
№
Name
Qty.
2
Wheel
2
15
Large flat washer
1
11
Cotter pin
1
14
Screw M6×50
1
16
Small large washer
1
18
Hex nut M6
1
Slide a wheel (2) over the left side of the ax-
le (10), followed by a large flat washer (15).
Insert the cotter pin (11). Place the second
wheel (2) on the right side of the axle (10) and
secure it with the M6×50 screw (14), small
washer (16) and hexagon nut (18).

© by WilTec Wildanger Technik GmbH Item 50144 Page 7
http://www.WilTec.de
http://www.aoyue.eu 09 2021-1
http://www.teichtip.de
Step 4-1
№
Name
Quantity
1
Hopper
1
23
Slot
1
Turn the hopper (1) upside down and push the slot (23) completely into the guide channel on the un-
derside of the hopper.
Step 5
№
Name
Qty.
1
Hopper
1
21
Screw M6×40
4
16
Small flat washer
5
18
Hex nut M6
5
3
Spinner disc
1
20
Release pin
1
19
Screw M6×55
1
17
Lock washer
2
Fasten the hopper (1) to the supports (5, 6, 7)
with the M6×40 screw (21), small washer (16)
and hexagon nut (18). Fasten the hopper to the
spreading disc (3) with the release pin (20).
Fasten the control cable (1-1) to the front
bracket (9) with an M6×55 screw (19), a small
flat washer (16), a lock washer (17) and a cable
lock nut (22).
Note! The control cable (1-1) comes pre-
installed on the hopper.

© by WilTec Wildanger Technik GmbH Item 50144 Page 8
http://www.WilTec.de
http://www.aoyue.eu 09 2021-1
http://www.teichtip.de
Step 6
№
Name
Qty.
4
Steering link connector
2
15
Screw M6×40
2
11
Small flat washer
2
14
Screw M6×50
2
16
Hex nut M6
2
Fasten the steering link connector (4) to the
front bracket (9) with an M6×40 screw (21), a
small washer (16) and a hex nut (18).
Important:
Reprinting, even in part, and any commercial use, including parts of the manual, only with the written
consent of WilTec Wildanger Technik GmbH.