S/S SOUP WARMER S/S SOUP WARMER
SPECIFICATIONS
Model #: ESW-70
Capacity: 10 Quarts
Electrical: 120V, 60 Hz; 400W
Read and understand all instructions before using the soup warmer.
CAUTION! SURFACE WILL BE HOT!
WARNINGS
This appliance is designed for commercial use only.
This appliance must be placed on a level surface.
Do not leave this appliance unattended while it is in use.
Never immerse the appliance in water.
Do not operate the kettle while it is empty.
Do not overll the appliance with water.
Never move or carry the kettle when it is “ON” or if it is
full of hot liquids.
Do not attempt to repair or replace the power cord if it
becomes damaged. Contact a certied service agent or
call our customer service number: 1-888-946-2682
Be careful not to touch any hot surfaces. Make sure
the power cord does not come in contact with any
hotsurfaces.
OPERATION
CAREFULLY UNPACK THE SOUP KETTLE WARMER
AND INSPECT IT FOR DAMAGE.
Place the warmer on a solid, level surface.
Use with wet heat only.
Add 20 oz. (0.6 liters) of water to the kettle before placing the
bain marie insert into the warmer.
Never over-ll with water. Use the waterline marks at the base
of the kettle. Under no circumstances should the bain marie
insert oat, even when empty. Do Not exceed max level.
Remove any excess water immediately.
Turn the warmer on. The indicator light will glow,
showing that the unit is on.
Adjust the temperature control dial to correct setting:
Settings 8-12 are designed for initial warm-up
Normal control settings range from 1-8
Once the kettle has reached the desired temperature,
adjust the temperature control dial to a lower setting. It is
recommended that the lowest possible setting that maintains
food-safe serving temperatures be used.
Always keep the hinged lid attached and closed when
not serving.
NOTE: This soup kettle warmer is not designed to
cook soups or sauces, nor is it designed to
rethermalize cold or frozen products.
⚠
