Wingman Models WMK48016 User manual

Belgian Air Force
Plastic parts
Resin Parts
Etched Metal Parts
Brass Parts
WMK48016
1/48 Scale
A B DC
Parts not in use
Dornier Alpha Jet B ‘Plus’
10
1
27
27
21
16 22
14
28
24
23
20
19
18
17
26
25
1
Do the same for the
opposite side
Use Wingman parts
instead
Drill a hole Photo etch parts.
Glue with Super glue.
Apply decal Options Multiple time Painting
Instructions
Important
Notes
Assembly guide
Our painting instructions
refer to the CSI Creos Mr.
Hobby ( ) and Humbrol
(HU x) ranges of paints.
Paints required for this
model are:
H x
HU 11
HU 26
HU 53
HU 56
HU 66
HU 81
HU 86
HU 99
HU 155
HU 159
HU 165
HU 196
Silver
Khaki
Gun Metal
Aluminium
Dark Olive Drab
Brownish Yellow
Light Olive
Lemon
Olive Drab
Khaki Drab
Medium Sea Grey
Light Grey
White
Black
Red
Yellow
Silver
Steel
O-White
Metal Black
Tire Black
FS 36320
Radome (Beige)
CSI Creos Mr. Hobby
Humbrol
These paints are available
online on our website:
www.shopofphantoms.com
Paper Masking
MA
F
C
J
L
M
O
B
A
D
K
I
NHE
12 12
11
13
2
6 7 8
3 4
5
9
G
H 21
H 1
H 2
H 3
H 4
H 18
H 8
H 77
H 28
H 307
H 318

0
On part remove the
two supports for the air
vents on the outer sides
of the rails.
On part remove
the two supports for
the air vents on the
outer sides of the rails.
1a
1b
1
2
3
2
Front Seat Rear Seat
4
10
B29
B28
C34
C34
The numbers in brackets
refer the other side.
Front cockpit
Place decal #99 on top of
#100 and cut away access
clear film. Paint CTR housing
matt black with glossy black
screen.
Rear cockpit
Both Seats
Mk.10 Ejection Seats
Paint the metal frame of
the Mk.10 ejection seats
Medium Sea Grey HU 165
with head rest and back
rest cushions in a mixture
of HU 86 Light Olive and
HU 155 Olive Drab. The
seat belts are HU 26 Khaki
with pulls in HU 155 Olive
Drab. The housing of the
rescue pack is painted
in HU 99 Lemon. Other
colors in use are Red,
Yellow HU 24, White, Black
HU 33.
Cockpit Tub:
Paint the cockpit tub,
instrument panels and
bulkheads H 307
FS36320 Dark Compass
Ghost Grey, with black
instruments and wires.
C21
1b
1a
4
HU 56
Aluminium
HU 56
Aluminium
11
3
2
9
11
3
4
11
( )
D E
( )
F G
J
( )
A B
( )
C C
Important:
Place PE-parts
E/D on top of A/B
and C
Place decal #101 on top of
#102 and cut away access
clear film. Paint HUD housing
matt black.
H 307
H 307
H 307
FS 36320
H 2
Black
H 2
Black
H 2
Black

A2
After installing
the intake .
Repeat this step, while
the numbers in brackets
refer to the other side.
3
A3
After installing
the intake .
Remove
6
6
6
6
6
5
8
7
C54
C63
C29
C62
C19
C56
C36
C29
3
7
7
C4 (C1)
C2 (C3)
C11
C26
C27
A4 A5
D1
B27
C60
5 6
7
89
10
Paint the insides of
the intake trunks
H 21
O-White and the en-
gine blades HU 53 Gun
Metal. The intake ramp is
painted in aircraft cam-
ouage.
C25
C25
Open front cavity of parts
B27 and C60 to assembly
parts C59.
C59
C59
Close hole and
sand smooth for
our PE-parts.
Cockpit:
Paint side walls H 307
FS36320 Dark Compass
Ghost Grey.

Use our pre-cut masking
( & )for painting the
wheel hubs.
12
Option to place air brakes in
up or closed position.
* For proper wheel
attachment, refer to the
nal page of this assem-
bly guide.
13
14
B4 (B3)
B4 (B3)
C39 (C39)
C40 (C40)
C43 (C43)
C44 (C44) Flaps down
B5 (B6)
C16 (C17) B14 (B14)
B17
B16
B12 (B13)*
B8 (B7)
D13 (D14)
Flaps up
4
12
13
To properly mask the
front canopy, first attach
masks #20 and #21.
Canopy masks
D7 (D7)
28
22
5
9
4
O
11
D12
D13
Air Brake:
Open C15+C46+C9
or
Closed A6
Use our pre-cut paper
masking provided in this
kit.
The numbers in brackets
refer to the other side.
Air Brake:
Open C15+C46+C9
or
Closed A6
D3
D4
D5
MA
16
MA MA MA
MA MA MA
MA
16
16
19
18
17
21
26
24
MA MA
MA
MA
MA
25
20
23
MA
MA
18
18 17
19
22 19 17
24
23 25
26
HU 56
Aluminium
H 2
Black
H 2
Black
Tires are painted H 77 Tire
Black with wheel hubs in HU
56 Aluminium.
The front landing gear
assembly is painted HU 56
Aluminium, while the main
landing gears are coloured
HU 196 Light Grey. Keep
oleos HU 11 Silver.
Paint air brake insides and
the air brake housing HU
56 Aluminium.

N
Option to close both cano-
pies or leave them open.
15
5
Front Canopy
Rear Canopy
Etched parts inside
both main canopies.
IH
KK
Closed
canopy
Open
canopy
D10
D10
D11
D11 B3
B1
B23
D5 (D5)
B22
10
12
12
16
B15
A2
C57
C51
A49
C52
C53 C45
Remove pins to place
landing gear doors in
closed position.
Remove pins to place
landing gear doors in
closed position.
B15
17
13
13
Drill holes for parts B39
and B40 (gun pod).
Adjust n assembly and
check before gluing it
to the fuselage. Some
sanding may be required.
Closed
canopy
Open
canopy
IH
KK
N
Paint main landing gear
shock absorbers HU 196
Light Grey – keep oleos HU
11 Silver.
Paint front landing gear
bay, door insides and shock
absorber (part C45) HU 56
Aluminium.

Our kit comes with four
external fuel tanks.
18
17
C12
C13
C38
C7
C8
C30
C32
C33
C31
6
19
Use brass gun muzzle from
MASTER/Poland to nish
the gun pod.
B39
B40
20
22
C23+24
C6+C5
C41
21
B37
C36
B10
A
B
Drill hole for part C51.
C51
C38
22
21
21
B
A
19
Repeat for the left wing.
14
L
M
Belgian Alpha Jet:
Fill hole with putty or cy-
anoacrylate glue and sand
smooth. Use our PE parts
and .
L M
Paint insides of front and main
landing gear doors HU 56 Alu-
minium. Engine exhausts are
painted in H 76 Burnt Iron.

23
C47
D6
For perfect t of our super
detailed wheels remove
red areas
Prior to modication.
B
A
After to modication.
Resin Wheel Attachment
How to attach our resin
wheels properly.
Wetterkreuz 13 – 91058 Erlangen – Germany
www.wingmanmodels.com – www.shopofphantoms.com
Note: Wingman Models
is oering highly detailed
ordinance made of resin to
replace the kit parts and
to add to the kits realism
e.g. the MATRA built 250
kg General Purpose Bombs
and dual bomb carriers.
Check our website for new
releases:
www.wingmanmodels.com
Belgian Alpha Jet:
Fill hole with putty or cy-
anoacrylate glue and sand
smooth. Use our PE parts
and .
L
M
L M
Paint antennas and Pitot-
tube bases either HU 196
Light Grey or H 318 Radome
(Beige).