Winmate M101Q8 Series User manual

Please read these instructions carefully before using this product, and save this manual for future use.
M101Q8 Series
Rugged Android Tablet
Qualcomm® SDA 660 Kryo 260 CPU, octa-core, up to 2.2 GHz
Android 9.0
Quick Start Guide
Version 1.0
Document Part No. 915211101068

2 M101Q8 Rugged Android Tablet
❶Getting Started
Congratulations on purchasing Winmate® M101Q8 Rugged Android Tablet Computer. The
rugged design allows you to use it in harsh outdoor environments.
This quick start guide tells you step by step how to get the Tablet Computer up and running.
You will find instructions for the following procedures:
• Unpacking
• Description of Parts
• First Time Operations
• Turning On/ Off the Device
❷Unpacking
Check and identify the standard supplied accessories.
Standard factory shipment list:
•Tablet Computer
•Standard Battery
•Power Adapter
•Power Cord and Plugs
•Capacitive Touch Stylus
•Quick Start Guide

3
Quick Start Guide
❸Description of Parts
Front:
Right:
No
Item
Description
1
Front
Camera
2 Megapixel Webcam
2 LED
Indicators:
Show the current status of
the Tablet Computer Red:
Charging / Hot-swap battery
Green: Full Charge Blue:
Turning on
3 Touch
Screen
Display and act as one of the
inputs for the Tablet
Computer
4
Back
Button
Back to previous page
5
Home
Button
Back to Desktop
6
Power
Button
Power on/off
7 I/O Cover Protects I/O ports
Front LED Indicators Details:
Front Button Details:
No
Item
Description
8
Micro
SD Card
Reader
Memory card reader
port for Micro SD
Card
9
USB
Type C
High speed USB port
connects to PC or
USB devices such as
mouse, keyboard, etc.
Note: The USB Type-
C connector follows
USB 3.0 standard and
support Dual Role
port (DRP), which
does not support
Alternate Mode (ALT)
or USB Power
Delivery (USB-PD).
10
USB 3.0
Host
High speed USB port
connects to PC or
USB devices such as
mouse, keyboard, etc.
Note: This USB port
won’t work when the
tablet is connected to
the optional docking.
Please use the USB
ports on the docking.
11
Mic
In/Line
Out
Headset or
headphone can be
connected
12
Power
Jack
DC-IN power input
jack
Side I/O Details:

4 M101Q8 Rugged Android Tablet
Rear:
No
Item
Description
13 NFC Optional NFC reader for
reading of NFC tags.
14
Kensington
Lock Port
Provide lock access for
Kensington Lock.
15 Expansion
Port
Provide optional
connectivity to custom
modules for special
application (USB2.0,
RS232).
16 Rear
Camera
5MP Autofocus Camera.
Captures photos and
videos.
17 Optional
Barcode
Barcode Scanner for
reading of 1D / 2D
barcode.
18 Fn Button Menu.
19
Volume
Control or
Scan
Buttons
Volume Control
(+) Raise volume,
(-) Lower volume.
Scan Button
Use WDC to change
button definition (+)/(-)
for scanning
20
Speakers
Emits sounds
21
3G / LTE
Module
(Optional) /
SIM card
slot
Service window to insert
Micro SIM card. Also
provide access to 3G /
LTE Module.
Bottom:
No
Item
Description
22 Battery Lock
Latch
Latch to lock the battery
in place once battery is
inserted. No spring
loaded.
23
Touch Pen
Slot
Pen holder slot to store
touch pen.
24
Battery
Release
Slider
Spring-loaded slider
that latches the battery
in.
25 Docking
Connector
Port to docking
solutions such as
vehicle docking to
provide power and
external antenna.
❹First-Time Operation
To get started:
1. Install SIM-card (For WWAN equipped devices).
2. Insert MicroSD card.
3. Install the battery.
4. Charge your tablet.
5. Start the tablet.

5
Quick Start Guide
Installing SIM Card (For WWAN Equipped Devices)
The Tablet Computer supports WWAN data connection and fits a Micro-SIM card.
To install the SIM card:
Tools Needed:
Service Windows
Screw: M2x5, 4 pc
Screwdriver: Philips Type , Size #0 , for
M2 screws, torque: 2.0 ± 0.5 kgf.cm
3G/ LTE Module
Screw: M2x3.5, 1 pc
Screwdriver: Philips Type , Size #0 , for
M2 screws, torque: 2.0 ± 0.5 kgf.cm
❶Remove four screws and remove the service
window.
❷Remove the one screw that secures the WWAN
module. Carefully lift the module up. Do not to
damage the connected cables!
❸Carefully flip and move the WWAN module and to
the right. Do not disconnect cables!
❹Insert SIM-Card all the way in. Chip/ contact
facing down.
❺Use your hand to carefully pull the cable outside
the module card. Re-insert the WWAN module and
fasten one screw. Accurately route the cables. Do
not bend cables! Do not pinch/ squeeze the cable!
❻Re-insert the service window and fasten with the
four screws.
Caution When re-inserting WWAN module, please pay attention to cable routing. Make
sure the cable module does not get squeezed.
Attention Lors de la réinsertion du module 3G / LTE, veillez au routage des câbles.
Assurez-vous que le module ne soit pas comprimé.

6 M101Q8 Rugged Android Tablet
Inserting MicroSD Card
Your tablet supports Micro SDXS card.
To install Micro SDXS card:
1. Open I/O protective cover by pulling out the latch.
2. Insert microSD card into slot with contacts facing down.
3. Press the card in to ensure that it is seated properly.
4. Close I/O protective cover.
To remove Micro SDXS card:
1. Open I/O protective cover by pulling out the latch.
2. Push and release the micro SD card to unlock it.
3. Pull out the micro SD card.
Inserting Battery Pack
Warning!
Discontinue using device immediately if you notice the battery is swelling, or looks
puffy or misshapen. Do not attempt to charge or use the device. Do not handle a
damaged or leaking battery. Do not let leaking battery fluid come into contact with
your eyes, skin or clothing.
Caution
To keep battery health and prevent possible issues from battery over-discharged,
please charge the tablet built-in back-up battery once every two months.
To insert the standard battery pack into the Tablet Computer:
1. Disconnect AC adapter and power cord from the tablet computer.
2. Turn the tablet computer over, back facing up.
3. Locate the Battery Lock Latch and push it to the “Unlocked” position.
4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.
5. Insert the battery on the connector-pins side first, and then lower the battery into the
battery compartment. Continue to hold the Battery Release Slider before battery is fully
inserted.
6. Make sure the battery is completely lowered into the compartment before letting go the
Battery Release Slider. Battery will be flat against the housing once fully inserted.

7
Quick Start Guide
To remove the standard battery pack into the Tablet Computer:
1. Power off the tablet computer (or put it to sleep). Disconnect any cords connected to the
computer.
2. Turn the tablet computer over, back facing up.
3. Locate the Battery Lock Latch and push it to the “Unlocked” position.
4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.
5. Lift the battery out using the opening on side of battery compartment.
Connecting to Power Supply
The Tablet Computer operates either on external AC power or internal battery power. It is
recommended to use AC power when you start up the Tablet Computer for the first time.
Caution
Use only the AC adapter included with your Tablet Computer. Using other AC
adapters may damage the Tablet Computer and the Battery.
Caution
For users start up the Tablet Computer for the first time with internal battery
power, please make sure the battery is fully charged before using.
To connect the Tablet computer to AC Power:
1. On the side of the Tablet computer, lift the I/O protective cover by pulling on the latch
2. Plug the DC cord of the AC adapter into the Power Jack of the tablet computer.
3. Plug the AC power cord into the AC adapter.
4. Finally, Plug the AC power cord into the electrical outlet.
When the AC Adapter is connected, the battery pack starts charging. The battery LED
indicator on the tablet computer would show different states. Please refer Description of Parts
for information about LED indicators.
Standard Battery
Battery Operating Time
8 Hours
Battery Charging Time
2.5 Hours

8 M101Q8 Rugged Android Tablet
❺Turning On and Off the Device
To turn on the device:
1. Press and hold the power button for 3 seconds, located on the top side of the unit.
2. When the device vibrates, release the power button.
3. The desktop screen is displayed.
To turn off the device:
1. To turn off the device, press and hold the power button until the phone options menu
appears, tap the Power Off .
2. User can also use the Phone options menu to put the device into silent or airplane mode.

Winmate Inc.
9F, No.111-6, Shing-De Rd., San-Chung District,
New Taipei City 24158, Taiwan, R.O.C
www.winmate.com
Copyright © Winmate Inc. All rights reserved.