Winmate Slim-line User manual

10.1" S-Series HMI
W10FA3S-PCH2AC-PoE (with LED light bar)
W10FA3S-PCH2-PoE (without LED light bar)
Slim-line
User Manual
Version 1.3
Document Part Number: 9152101I1002

i
Preface
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits
and/or software described or contained in this manual in order to improve design and/or
performance. We assume no responsibility or liability for the use of the described
product(s) conveys no license or title under any patent, copyright, or masks work rights to
these products, and make no representations or warranties that these products are free
from patent, copyright, or mask work right infringement, unless otherwise specified.
Applications that are described in this manual are for illustration purposes only. We make
no representation or guarantee that such application will be suitable for the specified use
without further testing or modification.
Warranty
Our warranty guarantees that each of its products will be free from material and
workmanship defects for a period of one year from the invoice date. If the customer
discovers a defect, we will, at his/her option, repair or replace the defective product at no
charge to the customer, provide it is returned during the warranty period of one year, with
transportation charges prepaid. The returned product must be properly packaged in its
original packaging to obtain warranty service. If the serial number and the product shipping
data differ by over 30 days, the in-warranty service will be made according to the shipping
date. In the serial numbers the third and fourth two digits give the year of manufacture, and
the fifth digit means the month (e. g., with A for October, B for November and C for
December).
For example, the serial number 1W14Axxxxxxxx means October of year 2014.

ii
Customer Service
We provide a service guide for any problem by the following steps: First, visit the website of
our distributor to find the update information about the product. Second, contact with your
distributor, sales representative, or our customer service center for technical support if you
need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We
are always ready to give advice on application requirements or specific information on the
installation and operation of any of our products.

iii
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information
or to alert you to the potential for hardware damage or personal injury. These are Notes,
Important, Cautions, and Warnings. The following is an example of each type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to know.
CAUTION/ ATTENTION
A Caution alert indicates potential damage to hardware and explains how to
avoid the potential problem.
Une alerte d’attention indique un dommage possible à l’équipement et
explique comment éviter le problème potentiel.
WARNING!/ AVERTISSEMENT!
An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.
Un Avertissement de Choc Électrique indique le potentiel de chocs sur des
emplacements électriques et comment éviter ces problèmes.
ALTERNATING CURRENT / MISE À LE TERRE!
The Protective Conductor Terminal (Earth Ground) symbol indicates the
potential risk of serious electrical shock due to improper grounding.
Le symbole de Mise à Terre indique le risqué potential de choc électrique
grave à la terre incorrecte.

iv
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections while
the power is on. Sensitive electronic components can be damaged by
sudden power surges. Only experienced electronics personnel should
open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque vous
travaillez sur celui-ci. Ne pas brancher de connections lorsque
l’alimentation est présente. Des composantes électroniques sensibles
peuvent être endommagées par des sauts d’alimentation. Seulement du
personnel expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before touching the
CPU card. Modern electronic devices are very sensitive to static electric
charges. As a safety precaution, use a grounding wrist strap at all times.
Place all electronic components in a static-dissipative surface or static-
shielded bag when they are not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge statique
avant de toucher la carte CPU. Les équipements électroniques moderns
sont très sensibles aux décharges d’électricité statique. Toujours utiliser
un bracelet de mise à la terre comme précaution. Placer toutes les
composantes électroniques sur une surface conçue pour dissiper les
charge, ou dans un sac anti-statique lorsqu’elles ne sont pas dans le
chassis.
Safety Precautions
For your safety carefully read all the safety instructions before using the device. Keep this user
manual for future reference.
Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid
or spray detergents for cleaning. Use a damp cloth.
For pluggable equipment, the power outlet must be installed near the equipment and
must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting it fall
could cause damage.
The openings on the enclosure are for air convection and to protect the equipment from
overheating.

v
CAUTION/ATTENTION
Do not cover the openings!
Ne pas couvrir les ouvertures!
Before connecting the equipment to the power outlet make sure the voltage of the
power source is correct.
Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.
Never pour any liquid into an opening. This could cause fire or electrical shock.
Never open the equipment. For safety reasons, only qualified service personnel should
open the equipment.
All cautions and warnings on the equipment should be noted.
*Let service personnel to check the equipment in case any of the following problems
appear:
oThe power cord or plug is damaged.
oLiquid has penetrated into the equipment.
oThe equipment does not work well or you cannot get it to work according to
the user manual.
oThe equipment has been dropped and damaged.
oThe equipment has obvious signs of breakage.
Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the equipment.
CAUTION/ATTENTION
Use the recommended mounting apparatus to avoid risk of injury.
Utiliser l’appareil de fixation recommandé pour éliminer le risque
de blessure.
WARNING!/ AVERTISSEMENT!
Only use the connection cords that come with the product. When
in doubt, please contact the manufacturer.
Utiliser seulement les cordons d’alimentation fournis avec le
produit. Si vous doutez de leur provenance, contactez le
manufacturier.

vi
WARNING!/ AVERTISSEMENT!
Always ground yourself against electrostatic damage to the device.
Toujours vérifier votre mise à la terre afin que l’équipement ne se
décharge pas sur vous.
Cover workstations with approved anti-static material. Use a wrist strap connected to a
work surface and properly grounded tools and equipment.
Use anti-static mats, heel straps, or air ionizer for added protection.
Handle electrostatic-sensitive components, PCB’s and assemblies by the case or the edge of
the board.
Avoid contact with pins, leads, or circuitry.
Turn off power and input signals before inserting and removing connectors or test
equipment.
Keep the work area free of non-conductive materials, such as ordinary plastic assembly aids
and Styrofoam.
Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that are
conductive.
Always put drivers and PCB’s component side on anti-static foam.

vii
Important Information
Countries/ Area
Symbol
This equipment complies with essential requirements
of:
European Union
Electromagnetic Compatibility Directive(2014/30/EU)
Low Voltage Directive (2014/35/EU)
Restrictions of the use of certain hazardous substances
(RoHS) Directive (2011/65/EU)
USA
FCC Part 15 Subpart B Regulations Class B
Federal Communications Commission Radio Frequency Interface Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "B" digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at him own expense.
Refer to Certificates for the original document.

viii
EC Declaration of Conformity
[English]
The object of the declaration described above [A] is in conformity with the requirement
of the following EU legislations [B] and harmonized standards [C].
Product also complies with the Council directions [D].
[German]
Das oben beschriebene Objekt [A] entspricht den Anforderungen der nachfolgend
aufgeführten EU-Vorgben [B] und den harmonisierten Normen [C]. Das Produkt
entspricht außerdem den EU-Direktiven [D].
[French]
L'objet de la déclaration décrite ci-dessus [A] est conformité aux conditions stipulées dans
les législations de l’Union européenne énoncées ci-après [B] et aux normes harmonisées [C].
Ce produit est également conforme aux directives du Conseil européen [D].
[Other languages]
Other languages are available upon request.
Refer to Certificates for the original document.

ix
About This User Manual
This User Manual provides information about using the Winmate® 10.1” S-Series HMI
(Freescale).
The documentation set for the 10.1” S-Series HMI provides information for specific user
needs, and includes:
10.1” S-Series HMI Quick Start Guide - describes how to get the HMI up and running.
10.1” S-Series HMI User Manual –contains detailed description on how to use the
HMI, its components and features.
NOTE:
Some pictures in this guide are samples and can differ from actual product.
Document Revision History
Version
Date
Note
Author
1.0
18-Feb-2016
Initial Release
Andy Lee
1.1
7-Mar-2016
Add ADB Driver Installation
Andy Lee
1.2
11-Mar-2016
Add Touch Screen Calibration
Andy Lee
1.3
17-Aug-2016
Add Appendix A: NFC Tag Support,
Reading NFC Tag, Using Front Camera,
Winmate Home Manager.
Andy Lee

x
Contents
Preface................................................................................................................................ i
About This User Manual .....................................................................................................ix
1 Introduction .....................................................................................................................2
1.1 Product Features........................................................................................................ 2
1.2 Hardware Specifications ............................................................................................ 3
1.3 Software Support....................................................................................................... 4
1.4 Packing List................................................................................................................. 5
1.4.1 Accessories ...................................................................................................... 5
1.4.2 Options ............................................................................................................ 6
1.5 Appearance................................................................................................................ 8
1.6 Dimensions................................................................................................................. 9
2 Getting Started.................................................................................................................2
2.1 Powering On............................................................................................................... 2
2.1.1 AC Adapter Components................................................................................. 2
2.1.2 Power Considerations ..................................................................................... 3
2.1.3 Connecting the Source of Power..................................................................... 3
2.2 Connector Pinouts ..................................................................................................... 4
2.2.1 DC-in Terminal Block Connector ..................................................................... 4
2.2.2 POE/LAN Connector ........................................................................................ 4
2.2.3 Serial Port Connector ...................................................................................... 4
2.2.4 USB 2.0 Connector........................................................................................... 5
2.2.5 USB OTG Connector......................................................................................... 5
2.2.6 Micro SD Card Slot........................................................................................... 5
2.3 Turning On/ Off.......................................................................................................... 6
2.4 Configuring Serial COM Port Settings ........................................................................ 7
3 Operating the Device ......................................................................................................10
3.1 Operating System..................................................................................................... 10
3.2 Multi-Touch.............................................................................................................. 10
3.3 System Settings........................................................................................................ 11
3.3.1 Set up the Device........................................................................................... 11

xi
3.3.2 Home Screen ................................................................................................. 11
3.3.3 Quick Settings................................................................................................ 12
3.4 Ethernet ................................................................................................................... 13
3.4.1 Configuring Ethernet Settings ....................................................................... 14
3.4.2 Checking Ethernet ......................................................................................... 14
3.5 Testing LED Light Bar................................................................................................ 15
3.6 Reading NFC Tag ...................................................................................................... 16
3.7 Winmate® Home Manager (WHM) ......................................................................... 18
3.7.1 How to Lock Applications .............................................................................. 18
3.7.2 How to Unlock Applications .......................................................................... 20
3.7.3 How to Change Password.............................................................................. 22
3.8 Using Front Camera ................................................................................................. 22
3.8.1 The Camera Menu......................................................................................... 22
3.8.2 Shooting Photos ............................................................................................ 23
3.8.3 Shooting Videos............................................................................................. 24
4 Software Installation ......................................................................................................27
4.1 Android Debug Bridge (ADB) Driver Installation ..................................................... 27
4.1.1 Disabling Driver Signature on Windows 8..................................................... 28
4.1.2 ADB Driver Installation .................................................................................. 32
4.2 Installing Android Debug Bridge (ADB).................................................................... 36
4.3 Download Image Tool .............................................................................................. 37
4.4 OTA Update Guide ................................................................................................... 38
4.5 OS Image Update Guide........................................................................................... 41
5 Mounting Solutions ........................................................................................................43
5.1 Cable Mounting Considerations .............................................................................. 43
5.2 Safety Precautions ................................................................................................... 44
5.3 Mounting Guide....................................................................................................... 44
5.3.1 VESA Mount................................................................................................... 44
5.3.2 Flush Mount / Panel Mount .......................................................................... 45
5.4 Optional Mounting Solutions................................................................................... 46
5.4.1 Front Side Wall Mount .................................................................................. 46
5.4.2 Desk Stand..................................................................................................... 47

xii
6 Technical Support ...........................................................................................................49
6.1 Software Developer Support ................................................................................... 49
6.2 Problem Report Form .............................................................................................. 50
7 Certificates .....................................................................................................................52
7.1 FCC Declaration of Conformity ................................................................................ 52
7.1.1 W10FA3S-PCH2AC-PoE.................................................................................. 52
7.1.2 W10FA3S-PCH2-PoE ...................................................................................... 53
7.2 EC Declaration of Conformity .................................................................................. 54
7.2.1 W10FA3S-PCH2AC-PoE.................................................................................. 54
7.2.2 W10FA3S-PCH2-PoE ...................................................................................... 55
Appendix A: NFC Tag Support ............................................................................................57

10.1” S-Series HMI (Freescale)
1
Introduction
This chapter gives you product overview,
describes features and hardware specification.
You will find all accessories that come with the
HMI device in the packing list. Mechanical
dimensions and drawings included in this
chapter.

User Manual Chapter 1 Introduction
10.1” S-Series HMI (Freescale)
2
1 Introduction
Interactive and smart automation systems of intelligent buildings are in a fast growing
phase. Winmate multi-touch S-Series HMI is suitable for home automation and room
management systems. Flat surface is easy-to-clean and delivers aesthetically pleasing
look for any interior. By connecting to centralized database, it can provide real time
update for booking status and available schedule, or perform as a synchronous display
in meetings. Optional NFC is especially useful in access control applications.
S-Series HMI run on Freescale Cortex A9 i.MX6 Dual Core 1GHz (can be upgraded to
Quad Core) processor and support Android 4.4 and Linux Kernel 3.0.35 operating
systems. The HMI device features P-Cap touch-screen. These models designed with
front IP 65 dust and water proof, and IP22 on the back side.
The W10FA3S-PCH2AC-PoE model support an exceptional feature - LED light bar. With
the help of red, green, blue and orange LED indicators you can see the status of the
machine or processes afar. It significantly reduces power consumption by keeping the
display turned off.
1.1 Product Features
Winmate® 10.1” S-Series HMI features:
10.1'' 1280 x 800 Resolution with P-Cap multi-touch screen
PoE standard IEEE 802.3at (25 W)
Fanless cooling system and ultra-low power consumption
2 x USB, 2 x RS232 (optional 422/485), 1 x micro SD slot
Room booking schedule, access control, room information display
Front IP65 water and dust proof
Red/ Green/ Blue/ Orange LED light bar indicators on both sides
Optional NFC reader
Optional 2MP Front Camera

User Manual Chapter 1 Introduction
10.1” S-Series HMI (Freescale)
3
1.2 Hardware Specifications
HMI Device:
Model Name
W10FA3S-PCH2AC-PoE/ W10FA3S-PCH2-PoE
Display
Specifications
Size
10.1" TFT (widescreen)
Resolution
1280 x 800
Brightness ()
300 cd/m (typ.)
Contrast Ratio
800:1 (typ.)
Viewing Angle
-89~89 (H); -89~89 (V)
Max Colors
262K (6bit)
Touch
Projective-capacitive touch
System
Specification
CPU
Freescale® Cortex® A9 i.MX6 Dual Core
1GHz (Optional Quad Core)
System Chipset
Freescale® i.MX6
Memory
1GB LPDDR3 (Optional 2GB LPDDR3)
Storage
16 GB eMMC (default)
mSATA/ Micro SD card
Ethernet
Dual Broadcom BCM57780 GbE Controller
Speaker
1 x 1 watt speaker
OS
Android 4.4 (default)
Linux Kernel 3.0.35, QT 5.4 Browser
(optional)
I/O Connectors
Serial Port
2 x RS-232 (Default RS-422/optional 485)
USB Port
2 x USB 2.0 host
1 x USB OTG
Ethernet Port
1 x RJ 45-10/100/1000 Mbps (LAN/ PoE)
Memory
1 x Micro SD card
Peripheral
(optional)
NFC
Peer-to-peer, Full ISO 18092(up to 424
Kbits/s)
Reader/writer, ISO 14443-A-
B,MIFARE,FeliCa
NFC Forum tags, ISO 15693
(W10FA3S-PCH2AC-PoE)

User Manual Chapter 1 Introduction
10.1” S-Series HMI (Freescale)
4
Front Camera
2MP Front Camera
(W10FA3S-PCH2AC-PoE)
LED Light Bar
RGBO LED Light Bar on sides
(W10FA3S-PCH2AC-PoE)
Power
Management
Power Input
12 DC in 3-Pin Terminal Block (Phoenix
type)
Power over
Ethernet
Support PoE, requires IEEE 802.3at 25W
power input
Mechanical
Specifications
Dimensions
(W x L x H)
263.28 x 171 x 35.7 mm
Mounting
VESA mount (75 x 75mm)
Cooling System
Fanless design
Environmental
Considerations
Operating Temp.
0 °C to +50 °C
Humidity
30% to 90% (non-condensing)
IP Rating
Front: IP65 water and dust proof
Rear: IP22
1.3 Software Support
SDK:
Android Driver Programming Guide
Linux Programming Guide

User Manual Chapter 1 Introduction
10.1” S-Series HMI (Freescale)
5
1.4 Packing List
Carefully remove the box and unpack your HMI device. Please check if all the items
listed below are inside your package. If any of these items are missing or damaged
contact us immediately.
1.4.1 Accessories
Standard factory shipment list:
10.1” HMI Device
Power Cord
AC Adapter
Terminal Block 3
pin
External USB cable
Driver CD & User
Manual
VESA Mounting
Screws

User Manual Chapter 1 Introduction
10.1” S-Series HMI (Freescale)
6
1.4.2 Options
Package may include optional accessories based on your order.
VESA Desk Stand
Desk Stand Dimensions
Model Name: PCVS-V1
Part Number: 99KK00A0000E

User Manual Chapter 1 Introduction
10.1” S-Series HMI (Freescale)
7
Front Side In-Wall Mount
Model Name: PCFW-V1
Part Number: 99KK00A0000C
Dimensions