Wise & Blue WB130 User manual



~GMGiGjUSGsSGGGzptwslGilGiGoSGGG
GGGGGGGGGGUG
{G˅GGSGGSGGGGGG
˅GUG
oGGGGGGGGb
iGjG{G
GGGG{GGiGjG{GGGGGGG
GGGGGGGGGGUG{GGG
GGGGGGGGGGGGGGGG
GGGGGGGGU
GzT{G{G
GGGG{GGzT{G{GGGGGG
GGGGGGUG{GGGGGGG
GGGGGGSGGG~iXZW˅G¡GGGGGG
GGGGGGGGG¡GGU
GuGG
GGGG{GuSGhGuGyGGGGG
GGGGGGGGGGGGUG{GGG
GGGGGGGWUXGGGzjvGUGkGGSG
GGGGGuGGGGGGGGGGG
GGGGGU
GmGtG
GGGG{GGGGGGGGGGG
GGGGGGSGGGGGSGGGG
GGGGGiGSGGGGGGGGGGU
Z
|GtoG
jlGOP
jGo
{Gj
lGlTo
Y
~iXZWGwhjrhnlGjvu{lu{zpu{yvk|j{pvu
iGGG


54
WB130 Overview
Indicator Light
(3 color LED)
Call Button
(+)Key: Volume Up
(-)Key: Volume Down
Microphone
Charging Socket(Mini-USB)
Speaker
Charge your Headset
GETTING STARTED
Make sure your headset is fully charged before
first used.
Connect a travel charger to the charging socket.
The LED indicator shows the charging level as follows :
ೠ Red : Charging less
than 70%
ೠ Blue : Charging between
70% and Full
ೠ Green: Fully charged
Charge in Two ways :
1. Plug the travel charger into wall socket
2. Plug the brave charger using USB port in your computer
(Make sure the computer is on when using USB port.)
The LED indicator will turn red when the adaptor is correctly
engaged and the battery is stated charging. When charging is
completed, the LED will turn from red to green.
Note: It takes 2 hours to fully charge the Bluetooth
6

To Turn On
Press and hold the talk button for 3 seconds.
The LED indicator will then flash blue.
To Turn Off
Press and hold the talk button for 5 seconds.
The LED indicator will flash red and then go off.
After turning on the Bluetooth, you should pair it with
your phone in order to use it. There are 2 ways pairing :
1. Quick paring
After you turn the Bluetooth on in first-use, it enters the pairing
mode automatically.
1) Press and hold the talk button until LED indicator flashes
Red and Blue alternately.
2) Place the Bluetooth to your mobile phone within one meter.
3) Activate your mobile phone’s Bluetooth function. And Set the
mobile phone to search for all available Bluetooth devices.
4) After completing to search,
select the WB130 from the list of devices shown.
5) Enter the pin code “0000” and press “OK” to the Bluetooth
with your mobile phone.
6) If the pairing is completed successfully, the LED flashes
3 times continuously.
7) Go back to your mobile phone’s main menu. The Bluetooth
icon GGGGwill be displayed on the screen once it is activated.
Now, you are able to make and receive calls using
the Bluetooth.
76
Pair it with your phone
Turn On and Off
\G
ZG
NOTE: If you want to connect another mobile with the same Bluetooth,
you should completely disconnect the Bluetooth with the previous mobile
and then start to pair with new mobile.
6

98
To wear the Headset
Pair it with your phone
2. Easy paring (WB Technology)
Once the initial pairing mode is completed,
the Bluetooth enters the pairing mode automatically
by folding down the earpiece of the Bluetooth.
1) Fold down the earpiece of the Bluetooth,
then, the LED will flashes Red and Blue alternately.
2) Follow the same procedure from 3) to 7) of
Quick pairing mode mentioned above.
1. Without Earloop
1) Fold down the earpiece
of the Bluetooth.
2) Put the earbud snugly inside
your ear and then place the microphone
of the headset toward your mouth.
2. With Earloop
1) Combine
the Bluetooth with earloop.
2) Fit the earloop behind
your ear and then place
the microphone
of the headset toward
your mouth.
6

1110
Using your Headset
5. Voice dialing
If your mobile phone is equipped with
a standard voice dialing function,
1) Press the Talk Button about 1.5seconds.
2) When you hear a beep, and you speak
the name of the person who you want
to call (Depend on the phone).
6. Rejecting a Call
If you do not want to answer an incoming call, press the Talk
Button for 3 seconds.
7. Last number redialing
You may be able to redial your previous place call by pressing
the Talk Button when the earpiece is fold down.
1. Locking
When the earpiece is in a straight position,
it’s in locking mode. The talk button is locked
so that it can prevent an unwished dialing
by mistake.
4. Making a Call
1) The Bluetooth remember the last call. So,
if you want to make previous call, press
the Talk button of the Bluetooth.
2) To make another call, you should follow
the phone’s normal procedure on your mobile phone.
3. Ending a Call
1) Fold up the earpiece to end your call.
2) Or, press the talk button when it is folded down.
At this time, you will hear the beep through
the earpiece.
2. Answering a Call
1) Fold down the earpiece when it’s folded up.
2) Or, press the Talk Button when it’s folded down.
At this time you will hear the beep through
your earpiece.
NOTE: LED will flash green and blue continuously
when there is an incoming call.
6

1312
Using your Headset
11. Auto Reconnection with Bluetooth and Mobile Phone
Your Bluetooth headset and your mobile phone’s disconnection
is within 3minutes, the will automatically reconnect when they are
turned back on, when they become with in communication range.
Automatic reconnection is limited to 3 minutes. If it doesn’t
reconnect automatically, please tap the Talk Button to reconnect.
9. Transferring a Call
While on a call, press and hold the Talk Button for 3 seconds.
10. Transferring a 3 way call
While in a call, press and hold the Talk Button for 3 seconds to
reverse an incoming call. At this time, the previous call should be
standby mode and you can receive the incoming call.
12. A2DP Technology
The Headset is capable of streaming music over Bluetooth either
from a mobile phone or any other Bluetooth device supporting
A2DP. While listening to music if you receive a call, the music will
be suspended automatically. Then when you end a call, the
music will restart automatically from the suspended point. While
A2DP streaming music playing, LED will flashes Green every
3 seconds for 30 seconds.
13. Adjusting the Volume
Accordingly depending on your sound environment, you can
adjust the volume of the Bluetooth.
1) Press the Volume Up(+) or
Down(-) Button of the Bluetooth
to control the volume.
2) Or, you can increase or decrease
the volume with the volume
keys of your mobile phone.
Note: The Bluetooth contains the Self-tune technology and noise
reduction technology. therefore, you can hear more clear sound
with its technology. you should be give on the self-tune test in the
first use to hear the optimal personalized sound.
8. Mute
G Mute on : Press and hold the Volume Up(+) Button for
3 seconds. LED flashes Green every 10
seconds for 1 minute.
G Mute Off: Press and hold the Volume Up(+) Button for
3 seconds in the mode of Mute on.
6

1514
14. Self-Tune Test (WB Technology)
The Purpose of the Self-Tune test is to conduct quick and
precise hearing test, and let the WB120’s equalizer will self adjust
the sound frequency and volume level for optimized sound quality
to your comfort. The test will be conducted at the initial use,
and any time after necessary.
1) Wear the Bluetooth Headset in your year.
2) Press and hold the Volume Down(-) 5 seconds until you hear
beep sounds 3 times.
3) And then you will hear the “Getting Started” message.
4) Follow the direction from your headset and tap the Talk Button
whenever you hear the pure tone sound until you can hear
the voice message “End of the Test”.
Testing requires maximum 60 seconds.
15. Self-Tune Test / Reset
You may repeat the Self-Tune test at any time repeating
procedures mentioned above. If there is an incoming call during
testing, you may answer a call by pressing the Talk Button,
and star over re-testing after you end your call.
16. NoiZfree
With using the directional microphones and power signal
processing algorithms, it can allow to remove ambient noise
from your outgoing speech signal and transfer clear sound in
any environment.
17. Multi-Connection (Mobile to Other Devices)
The Bluetooth is compatible with connecting other two Bluetooth
devices at the same time.
(Mobile Phone to MP3/ PDA/ Laptop, etc. )
* It does not support the same profile devices
at the same time ( i.e. HFP/ HFP, A2DP/ A2DP )
18. Battery Indication
You may check on the current battery status by pressing
the Talk Button for 3 seconds. According to the status of battery
each LED flashed 3 times for twice at 0.5 seconds intervals.
Green : Available for 1 - 5 hours talk
Blue : Available for 20 min - 1 hour talk
Red : Available under 20 minutes.

1716
Using Accessory Trouble Shooting
1. Cradle
XPGGwGGiGG
GGGGGGGGGG
GGGGGGGGGGG
GGGGGGGGGU
YPG{GGGiSG
GGGGGGGGGGGUG
2. Hand strap
pGGGGGGiG
GGGiGG
GU
3. Car Holder
XPGhGGGGGGGG
GGGGGGGGGUG
YPGmGGGGGGG
GGGGiGGGGU
4. Earloop pack
GGGGGGGGG
GGU
If you are unable to connect your Bluetooth and
mobile phone, please try as follows :
G
TGlGGGiGGGUGG
GGG{GGGiGGGGGGUG
TGlGGGiGGGGGUG
TGlGGGG˅GiGGG
GGGG
GGOkGGGGSGiGG
GGGGGGGGG˅GP
TG~GGSGGiGGGXG
GGGGGGGGGGGGSG
GGGGGGGUG
TGlGGGiGGGGGG
GGGOXWVVZZPGGGUG
pGGGGGGGGGSG
GGGGGGGGGUG
kGGGGGGiGoG
GGSGGGG
iGGGiTGGGGUG
6

20
LED Color Indicating
21
LED Color Meaning Series of Flashes
Blue Power On Flashes 4 times.
Red Power Off Flashes 3 times
Red/ Blue In pairing mode Flash alternately until pairing success (last for 5 minutes)
Blue Pairing success Flashes 3 times continuously
Blue Connected with phone Flashes every 5 seconds
and stand-by mode (For 1 minute then off)
Blue Disconnected with phone Flashes 2 times every 5 seconds
and stand-by mode (For 1 minute then off)
Green/ Blue Incoming a call Flashes alternately continuously
Blue During a call Flashes every 10 seconds for 1 minute
Green Mute on Flashes every 10 seconds for 1 minute
Green Battery : 1~5 hours talk time Flashes 2 times rapidly every 0.5 seconds
Blue Battery : 20 min.~1 hour talk time Flashes 2 times rapidly every 0.5 seconds
Red Battery : under 20 min. talk time Flashes 2 times rapidly every 0.5 seconds
Red Low battery warning Flashes 2 times every 30 seconds continuously
Green Fully charged On
Blue Charging level 70% ~ full On
Red Charging level less than 70% On
Red/ Blue/ Green During Self Tune test Flashes alternately
Green Activating Noise Reduction mode On for 10 seconds
Green A2DP streaming music playing Flashes every 3 seconds for 30 seconds
6