Wiselion WBS-T007 User manual

QuickStart Guide
Wiselion WBS-T007

Quick Start Guide
Introduction
The device needs to be adjusted for maximum accuracy before first use.
Please follow the instructions provided here.
Measure your temperature with another direct contact thermometer you trust.
Then measure your temperature with the Wiselion digital thermometer.
If for example the temperature of the digital thermometer has a deviation of +0.5 οC
from your thermometer then set -0.5 οC (step 4) .

Quick Start Guide
Step 1
Press here to activate the device.

Press the “Set button” for about 3 seconds. After you release the
button, the screen will be as showed.
Quick Start Guide
Step 2

Press the “Set” button two (2) times.
The screen will show the below indication. (F3)
Quick Start Guide
Step 3

Press the ““+” & “-” in order to adjust the setting to the desired value
according to the deviation.
Quick Start Guide
Step 4

Finally press the “Set button” two (2) times to complete the set up.
Quick Start Guide
Step 5

Τhank you