WiSilica lumos CONTROLS Omni TED User manual

Omni TED
Trailing edge dimmer
www.lumoscontrols.com

PRODUCT OVERVIEW
SPECIFICATIONS
FEATURES
Omni TED is a BLE5.2 controllable, trailing edge dimmer. It
operates on 90-277VAC input voltage range and can work
with single LED loads of up to 250W and has output to connect
a switch. It also comes with an optional push button switch
input to control the dimming and ON/OFF of the connected
load.
The device is a part of the Lumos Controls ecosystem,
including controllers, sensors, switches, modules, drivers,
gateways, and analytical dashboards. It can be easily
commissioned, configured and controlled from any mobile
device and can be connected to Lumos Controls cloud for
data analytics and configuration management. The
ecosystem is listed by the Design Lights Consortium (DLC),
qualifying it for energy conservation incentive programs and
rebates by utility companies.
BLE5.2 based non-flooding intelligent communication
1 channel output, up to 250W
Supports resistive and capacitive loads
Optional push button switch input to control the dimming
and ON/OFF of the connected load
Compact form factor for easy installation
Zero downtime Over-The-Air (OTA) firmware updates
Electrical
Specifications RemarksValue
Input voltage 90-277VAC Rated input voltage
Active power
L-N, Bi wave
250W @277VAC;
125W @90VAC
Min power
requirement
Supply frequency
Inrush current
protection
Surge transient
protection
Dimming operation
mode
Max output power
None
50-60Hz
75A
4kV
Trailing edge
250W
02
Specifications RemarksValue
Frequency range 2402-2480MHz
Rx sensitivity
Connection distance
(device to device by mesh)
-95dBm
45m(147.6ft)
Bluetooth
In an open office
environment (Line of Sight)
Specifications RemarksValue
Dimension 45.1 x 35.1 x 20.2mm
(1.7 x 1.4 x 0.8in)
Weight 120g(4.23oz)
Mechanical
L x W x H
Case material ABS Plastic
Flammability rating UL 94 V-0
-40 to 80 ºC (-40 to 176°F)
(-4 to 122°F)
Specifications Value
Operating temperature
Storage temperature
-20 to 50°C
Relative humidity 85%
Environmental

PRODUCT DIMENSIONS
Omni TED top view: 45.1 x 35.1 x 20.2mm (1.7 x 1.4 x 0.8 in) (L x W x H)
Case material: V0 flammability rated ABS plastic
0.8in
(20.2mm)
1.4in(35.1mm)
1.7in(45.1mm)
9.8in(250mm)
9.8in(250mm)
0.39in(10mm)
0.39in(10mm)

1.4in
(35.1mm)
1.7in(45.1mm)
WIRE DESCRIPTION
1
4Pin Rating DescriptionGaugeName Color
90-277VAC
18AWG
(0.75mm2)
BlackLine 600V
For load18AWG
(0.75mm2)
RedLoad 600V
Common neutral
18AWG
(0.75mm2)
White
Neutral 600V
To connect switch control
18AWG
(0.75mm2)
BlueSwitch 600V
2
1
4
3
04
2
3
150mm wire antenna
150mm wire antenna
ANTENNA INFORMATION Antenna Properties
Frequency range 2.4GHz-2.5GHz
50Ω Nominal
1.92:1 Max
Impedance
VSWR
-10dB Max
Return loss
1.9 7dBi
Gain(peak)
0.3dBi Max
Cable loss
Linear
Polarization
2.125in
(53.98mm)
3.77in (85.6mm)
Size comparison with a standard credit card

05
Omni TED
90-277VAC 90-277VAC L
Line
Neutral
Load
Switch
N
Push
Switch
Omni TED
90-277VAC
L
Line
Neutral
Load
Switch
N
NC
NC
1. Controlling Omni Ted using Lumos Controls app
2. Configuring Omni TED with Push switch(Optional)
The Push switch is optional
1) Short Press the switch for ON/OFF.
2) Long Press the switch for continuous dimming
(High to low and vice-versa).
LED
-+
LED
-+
LED
-+
TRIAC Driver
TRIAC Driver
TRIAC Driver
Line
LED +
LED -
Neutral
Line
LED +
LED -
Neutral
Line
LED +
LED -
Neutral
LED
-+
LED
-+
LED
-+
TRIAC Driver
TRIAC Driver
TRIAC Driver
Line
LED +
LED -
Neutral
Line
LED +
LED -
Neutral
Line
LED +
LED -
Neutral
WIRING
Note
Total number of Drivers
that can be used will
depend on the input
rating of the Driver
Note
Total number of Drivers
that can be used will
depend on the input
rating of the Driver
Note

06
Gateway
SMART
ECOSYSTEM
Internet
Connectivity
45m(147.6ft) is the device to device communication distance ideally with clear LoS
Control Device
Omni TED
Switch
Sensor Mesh
Network
Article 3, RED 2014/53/EU
Certifications Details
CE
RoHS 2.0 RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU
REACH Regulation (EC) No 1907/2006 of REACH
WEEE Under the WEEE Directive: 2012/19/EU
Bluetooth Declaration ID: D059551
cETLus Standard: UL 60730-1
FCC ID: 2AG4N-WPARL
EMC test standards
Safety test standard
Radio test standard
Health test standard
(in progress)

07
ORDERING INFORMATION
Product Name Communication Voltage Rating Load Rating
WPARL BLE5.2 90-277VAC Up to 250W
Omni TED
Product DescriptionProduct Code
Trailing edge dimmer
ITEMS INCLUDED IN THE PACKAGE BOX
Omni TED User manual
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by WiSilica Inc. is under
license. Other trademarks and trade names are those of their respective owners.
All Rights Reserved WiSilica Inc
www.lumoscontrols.com
20321 Lake Forest Dr D6,
Lake Forest, CA 92630
[phone]
Ver 1.5 Feb 2023
Screw Wallplug Wirenut
APPLICATION
Omni TED
LED Fixture
Driver

FCC Caut i on:
Thi s devi ce compl i es wi t h par t 15 of t he FCC Rul es. Oper at i on i s subj ect t o t he f ol l owi ng t wo condi t i ons: ( 1)
t hi s devi ce may not cause har mf ul i nt er f er ence, and ( 2) t hi s devi ce must accept any i nt er f er ence r ecei ved,
i ncl udi ng i nt er f er ence t hat may cause undesi r ed oper at i on.
Any changes or modi f i cat i ons not expr essl y appr oved by t he par t y r esponsi bl e f or compl i ance coul d voi d t he user ' s
aut hor i t y t o oper at e t he equi pment .
NOTE: Thi s equi pment has been t est ed and f ound t o compl y wi t h t he l i mi t s f or a Cl ass B di gi t al devi ce, pur suant
t o Par t 15 of t he FCC Rul es. These l i mi t s ar e desi gned t o pr ovi de r easonabl e pr ot ect i on agai nst har mf ul
i nt er f er ence i n a r esi dent i al i nst al l at i on. Thi s equi pment gener at es, uses and can r adi at e r adi o f r equency ener gy
and, i f not i nst al l ed and used i n accor dance wi t h t he i nst r uct i ons, may cause har mf ul i nt er f er ence t o r adi o
communi cat i ons. However , t her e i s no guar ant ee t hat i nt er f er ence wi l l not occur i n a par t i cul ar i nst al l at i on.
I f t hi s equi pment does cause har mf ul i nt er f er ence t o r adi o or t el evi si on r ecept i on, whi ch can be det er mi ned by
t ur ni ng t he equi pment of f and on, t he user i s encour aged t o t r y t o cor r ect t he i nt er f er ence by one or mor e of t he
f ol l owi ng measur es:
- - Reor i ent or r el ocat e t he r ecei vi ng ant enna.
- - I ncr ease t he separ at i on bet ween t he equi pment and r ecei ver .
- - Connect t he equi pment i nt o an out l et on a ci r cui t di f f er ent
f r om t hat t o whi ch t he r ecei ver i s connect ed.
- - Consul t t he deal er or an exper i enced r adi o/ TV t echni ci an f or hel p.
To mai nt ai n compl i ance wi t h FCC’s RF Exposur e gui del i nes, Thi s equi pment shoul d be i nst al l ed and oper at ed wi t h
mi ni mum di st ance bet ween 20cm t he r adi at or your body: Use onl y t he suppl i ed ant enna.
FCC I D: 2AG4N- WPARL