WisyCom EXP3 User manual

MRKxx - EXP3 installation
rev.01
MRKXX –EXP3-SC INSTALLATION
WARNINGS:
• This wireless electronic equipment must be disassembled and
serviced only by qualified electrical personnel.
• Take electrical precautions before starting to work.
• use components with the same specifications.
• Customer is the only responsible for any damage occurred by improper service.
The aim of the following document is to give the instruction to install the expansion board EXP3 on
MRK980 or MRK16.
NOTE: the installation is possible on all MRK16 but only on MRK980-EX0 version. The EX0 version
can be recognized from the code EX0 on the product label and from the small black metal panel on
the rear panel.
EX0
small black metal panel

rev.01
MRKxx - EXP3 installation
2
EXP3 KIT:
Expansion board version 3
and kit for assembling:
CAFFC09
2x DSELL255013
2x VITCCX2520
2x RODX2505
2x ROPX2505
2x DSETL254022
2x VITCCX2506
4 xVISEMS2507
FOR MRK16
FOR MRK980

MRKxx - EXP3 installation
rev.01
ASSEMBLING INSTRUCTION
Remove the 10 screws on the top and remove the cover
Remove the 2 screws to remove black metal panel (holding the nuts in the internal part)
Insert the FFC jumper cable (code: CAFFC09) into the EXP3 connector (as in the picture):
For MRK980:
Insert the expantion board EXP3 and fix it to the rear panel with 2 screws (code: VITCCX2506)

rev.01
MRKxx - EXP3 installation
4
Fix the FFC jumper cable (code: CAFFC09) on the main board of MRKxx.
PAY ATTENTION to the verse!
Fix internally the board with the 2 cylindrical spacers
+ 2 screws with fan washer and flat washer:
VITCCX2520
RODX2505
ROPX2505
DSELL255013

MRKxx - EXP3 installation
rev.01
For MRK16:
Insert the cylindrical spacers + screws
DSETL254022 + VISEMS2507
Insert the board EXP3 and fit it to the rear panel with 2 screws (code: VITCCX2506)
Insert and fix the FFC jumper cable (code: CAFFC09) on the main board of MRK16

rev.01
MRKxx - EXP3 installation
6
Rotate 180° and remove bottom cover
Insert 2x VISEMS2507 as in the picture
Put the MRK16 back straight and fix the 2x VISEMS2507 previously inserted