WitGarage GD801S User manual

QICUK START
WITGARAGE

2
1Check all parts of the package box
There are two parts of the box. The big one is GD801C with an outlet,
and the other one is GD801S.
2Check compatibility
A. Check with compatible list and incompatible list page.
B. Check with our sales.
C. Check with user manual.
D. Can your garage door opener be controlled by wall console? If
yes, it is compatible.
3Install Mobile App & Create Account
A. Download “WitGarage” app from apple app store or google play
store, and install the app;
B. Launch the app and create an account;
4 Add WitGarage device to app
A. Power on GD801C, wait for some seconds until the led indicator
blinks fast with red color;
B. Add WitGarage device to WitGarage app follow the app tips;
C. Flip GD801S 90 degrees, bind GD801S to GD801C,
D. Make sure the led indicator of GD801C is solid green after you
finished all settings above;
WITGARAGE

3
5Test App settings
A. Flip GD801S 90 degrees again to check the state on your app;
B. Repeat the operation above for 3 to 5 times, and check the state on
your app every time.
C. Make sure the state is right after you flip the sensor;
6Mount WitGarage to garage door opener
A. Close your garage door, stick GD801S on the top of your garage door;
make sure the notch of GD801 is on the bottom.
B. Connect GD801C to your garage door opener;
7WitGarage system test
A. Launch WitGarage app, control your garage door by app, check the
state on your app and you will receive notifiation;
B. Repeat the operation above for 3 to 5 times, check again.
8Setup Alexa or Google home
A. Launch the app of Alexa or Google home, add skill “smart life”;
B. Link WitGarage account and authorize;
C. The voice command like this:
Alexa(ok google),Turn on xxx
Alexa(ok google), Turn off xxx
(xxx is the name of your device, the default name is “WitGarage”)
WITGARAGE