Wiznet WizFi360 Series User manual

© Copyright 2019 WIZnet Co., Ltd. All rights reserved.
WizFi360
Quick Start Guide
Version 1.1.2
WIZnet Co.,Ltd
Copyright© 2019

WizFi360 Quick Start Guide
History
Ver
Date
Description
1.0.0
Aug.2019
Initial version
1.1.0
Sep.2019
Modified environment setting
1.1.1
Sep.2019
Typing error
1.1.2
Oct.2019
Typing error
Modified Section 1 description

WizFi360 Quick Start Guide
Contents
1. Environment setting .........................................................................................................................................................4
2. Using Serial command......................................................................................................................................................5

WizFi360 Quick Start Guide
1. Environment setting
WizFi360-EVB
WizFi360io-C
RESET
WiFI
RESET
SW2
RTS/CTS Connect and
Arduino Pin
SW1
RXD1/TXD1 connect
and USB or Arduino
JP3JP2JP1
WizFi360io-C
5V GND RXD TXD RST GND
WizFi360-EVB can be controlled by AT command through UART1. UART1 included in WizFi360-EVB is
connected USB port and Arduino pin. Function of UART1 is determined by SW1. UART1`s function
table according to switches (SW1, SW2) is as below.
SW1(RXD1/TXD1)
SW2(RTS/CTS)
JP3(TXD),JP2,JP1(RXD)
Arduino Pin
OFF
ON
JP3<->D0, JP1<->D1
WizFi360 Pin and USB
ON
OFF
X
WizFi360io can use the AT command through UART and there are two types of module, WizFi360io-C
and WizFi360io-H.

WizFi360 Quick Start Guide
2. Using Serial command
A brief AT command describes for operating of WizFi360 as below. If you need AT command
example of another mode, see the documentation called “AT command examples”.
-Station Mode
AT command
Terminal
AT
AT+CWMODE_CUR=1
AT+CWDHCP_CUR=1,1
AT+CWLAP
AT+CWJAP_CUR=”ssid”,”password”
AT+CIPSTA_CUR?

WizFi360 Quick Start Guide
-TCP Client / Command mode
AT command
Terminal
AT+CIPSTART=”TCP”,”192.168.1.74”,5000
AT+CIPSENDBUF=10
0123456789 => 10byte data
AT+CIPSENDEX=10
012\0 =>3byte data