Wohler RM-3270W-3G2 User manual

RM-3270W-3G2
3RU, 2-Screen, 7” Dual 3G/HD/SD-SDI Input
Audio/ ideo Monitor
User Guide
Part Number 821825, Revision A

Page 2
© 2019 Wohler Technologies, Inc. All rights reserved.
This publication is protected by federal copyright law. No part of this publication may be copied or
distributed, stored in a retrieval system, or translated into any human or computer language in any
form or by any means electronic, mechanical, manual, magnetic, or otherwise, or disclosed to third
parties without the express written permission of Wohler Technologies.
Reproduction
Licensed users and authorized distributors of Wohler Technologies, Inc. products may copy this
document for use with Wohler Technologies., Inc. products provided that the copyright notice above
is included in all reproductions.
Customer Support
Wohler Technologies, Inc.
1280 San Luis Obispo Ave
Hayward, CA, 94544
www.wohler.com
Phone: [phone]
FAX: [phone]
US Toll Free: 1-888-596-4537 (1-888-5-WOHLER)
Web: www.wohler.com Sales: [e-mail]
Support: [e-mail]
Disclaimers
Even though Wohler Technologies, Inc. has tested its equipment and software, and reviewed the
documentation, Wohler Technologies, Inc. makes no warranty or representation, either express or
implied, with respect to software, documentation, their quality, performance, merchantability, or
fitness for a particular purpose.
In no event will Wohler Technologies, Inc. be liable for direct, indirect, special, incidental, or
consequential damages resulting from any defect in the hardware, software, or its documentation,
even if advised of the possibility of such damages.
Some states do not allow the exclusion or limitation for incidental or consequential damages, so the
above exclusion or limitation may not apply to you.
Printing
This document looks best when printed on a color printer since some images may be indistinct when
printed on a black and white printer.
PDF
All text strings underlined in this shade of blue are hyperlinks within this document.
Other Technologies and Products
Google Chrome is a registered trademark of Alphabet Inc. Microsoft Windows and Internet Explorer
are registered trademarks of Microsoft Corporation. Evertz and MAGNUM are registered trademarks
of Evertz Microsystems Ltd.
Last Update
February 21, 2019

Page 3
TABLE OF CONTENTS
Contents
User Guide..........................................................................................1
TABLE O CONTENTS............................................................................3
Contents .........................................................................................................3
CHAPTER 1: Installation ........................................................................4
Introduction ....................................................................................................4
Overview...............................................................................................4
eatures ...............................................................................................4
Safety.............................................................................................................4
Instructions ...........................................................................................4
Safety Symbols......................................................................................5
Mounting...............................................................................................5
Heat Dissipation.....................................................................................5
Sympathetic Vibration.............................................................................6
Mechanical Bracing.................................................................................6
Electrical Interference.............................................................................6
Power ...................................................................................................6
Compliance .....................................................................................................6
CC ......................................................................................................6
ICES-003 ..............................................................................................7
CHAPTER 2: Local Operation ..................................................................8
ront Panel ......................................................................................................8
On-Screen Display eatures...............................................................................9
Rear Panel.....................................................................................................11
Rear Panel Connectors ....................................................................................13
Using the Volume Control and the OSD Menus ...................................................14
Volume Control ....................................................................................14
Audio Selection and Muting ...................................................................14
OSD Menus .........................................................................................15
OSD Menus ...................................................................................................15
USB Upgrade .................................................................................................21
CHAPTER 3: Technical Info ................................................................ 22
Supported Video ormats ................................................................................24
CHAPTER 4: Using Network Control ...................................................... 25
Ethernet Connection .......................................................................................25
Control Tab ...................................................................................................29
unction 1 Tab...............................................................................................30
unction 2 Tab...............................................................................................31
UMD Tab .......................................................................................................32

Page 4
CHAPTER 1: Installation
Introduction
Overview
The 3RU rack-mounted RM-3270W-3G2 monitor sets a new standard in LCD
monitors for broadcast and professional video applications. It provides two 7”, 1280
x 800 resolution, 16:9 format, anti-glare IPS LCD screens. All video formats are
scaled to fit on screen in the highest quality using full digital processing, precision
scaling and gamma correction to produce the best images possible.
eatures
The RM-3270W-3G2 audio/video monitor is designed for confidence monitoring of
dual 3G/HD/SD-SDI, HDMI, and CVBS composite analog video. Input signals are
easily selected and displayed. Two to sixteen audio channels per screen may be
selected for visual monitoring on bar graph style level meters. On screen markers,
waveform, vector, and histogram displays can be enabled on this full-featured
monitor. ocus Assist mode can be engaged to assist with camera adjustments.
Stereo speakers as well as a headphone jack provide audio monitoring. When
mounted in a rack, it can tilt up or down for easy visibility.
Parameters are selected and adjusted using an On Screen Display (OSD) MENU. An
RJ45 connector serves as the interface to the two tally lights on the front panel.
Monitor settings can also be made with Client/Server software over an Ethernet
connection.
Safety
Instructions
1. Read, keep, and follow all of these instructions; heed all warnings.
2. Do not use this equipment near water.
3. Use only a dry cloth to clean the equipment.
4. Do not block any ventilation openings.
5. Do not install near any heat source such as a radiator, heat register, amplifier, or
stove.
6. Do not attempt to plug the unit into a two-blade outlet (with only two prongs of
equal width).

Page 5
7. Protect the power cord from being walked on or pinched, particularly at plug
connection on the equipment and at the socket.
8. Use only the attachments/accessories specified by the manufacturer.
9. Unplug the equipment during lightning storms or when unused for long periods
of time.
10. Refer all servicing to qualified service personnel. Servicing will be required
under all of the following conditions:
a. The equipment has been damaged in any way, such as when the power-
supply cord or plug is damaged.
b. Liquid had been spilled or objects have fallen onto the equipment.
c. The equipment has been exposed to rain or moisture.
d. The equipment does not operate normally.
e. The equipment has been dropped.
Safety Symbols
Mounting
The unit is designed for a standard 19" rack. Install it at ear/eye level for best high
frequency response and visual observation of the display screens. Please adhere to
the following clearances:
Table 1-1: Recommended Clearances
Clearance Surface
24” ront
3” Rear
2” Sides
1.75” Top and Bottom (if either radiates heat)
0” Top and Bottom (if no heat)
Heat Dissipation
The ambient temperature inside the mounting enclosure should not exceed 40°
The symbol to the left warns of electric shock hazard inside the unit.
Disconnect the power cord before removing access panels when
installing upgrades. Only qualified service personnel are to operate
the equipment with covers removed, and are to exercise caution to
avoid personal injury.
Important:
By design, this monitor will only plug into a three
-
prong out
let for
your safety. If the plug does not fit into the outlet, contact an
electrician to replace the obsolete outlet.

Page 6
Celsius (104° ahrenheit). Adjacent devices can be rack mounted (or stacked) in
proximity to the unit if this temperature is not exceeded. Otherwise, allow a 1RU
(1.75”/44.45mm) space above and below the unit for air circulation.
Sympathetic Vibration
Sympathetic vibration from other equipment (cables, etc.) in the rack may be
serious enough to interfere with the unit’s sound quality. If you experience
sympathetic vibrations, use thin card stock, felt, foam, or weather-stripping
between the vibrating surfaces. Tie loose cables securely with cable ties.
Mechanical Bracing
The 3RU chassis is securely attached to the front panel. In addition, the chassis has
mounting tabs through which you attach it to the rack rail. This feature will reduce
or eliminate rear bracing requirements in many mobile/portable applications. The
weight of internal components is distributed fairly evenly around the unit.
Electrical Interference
Be careful to avoid mismatched cable types and other similar causes of undesired
reflections in digital signal systems. If severe enough, such reflections can result in
corruption of the digital data stream. As with any audio equipment, maximum
immunity from electrical interference requires the use of shielded cable; however,
satisfactory results can sometimes be obtained without it. The internal circuitry
ground is connected to the chassis.
Power
The unit comes with a standard external 12 VDC / 4 A power supply that connects
to an AC mains power source (100 to 240 VAC, ±10%, 1.5A max, 50/60Hz) using
an IEC power cord. This power supply connects to the rear panel of the unit with a
low voltage DC power cord and connector.
When the mains plug or appliance coupler is used as the disconnect device, the
disconnect device should remain operable.
Compliance
CC
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the CC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
Important
:
To reduce noise, the monitor does not have any fans. As a
result, the heat generated by the audio amplifiers, power
supplies, and other components is vented by slots in the back of
the unit. Therefore, as a safety precaution, you must allow
proper ventilation on these surfaces.

Page 7
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at
their own expense.
ICES-003
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.

Page 8
CHAPTER 2: Local Operation
The dual video input RM-3270W-3G2 front and rear panels are described in this
chapter.
Front Panel
igure 2–1: ront Panel Layout
1. Tally Lights: These tri-color (red/green/amber) lights are controlled through a
RJ45 connector on the rear panel. or more information about the RJ45
connector, refer to igure 2-5 and Table 2-1.
2. LCD Screen: The LCD screens display the selected video source as well as the
audio meters, menus, and OSD features over the selected video source.
3. Speakers: Audio may be selected for monitoring through the left and right
speakers. Control the volume of the speakers using the Left (<) and Right (>)
buttons. Refer to the olume Control section later in this chapter.
4. Headphone Jack: Monitor the assigned left/right stereo audio channels with
stereo headphones from this mini-stereo connector. Control the volume of the
headphones using the Left and Right buttons. Refer to the olume Control
section later in this chapter.
5. Power: Each of the two Power buttons turn the associated LCD screen on and
off; the adjacent LED glows red when off, orange when starting up, and green
when the screen is receiving a signal and ready for operation. Note that as a
protection against inadvertent presses, the Power button does not function
while the OSD Menus appear on the screen.
6. Mute: The Mute/Audio Select button picks the audio source to be from the
left or right screen program. When audio has already been selected on a screen,
this button becomes a Mute control, enabling or disabling audio in the speakers
and headphones. It is an alternate action button.

Page 9
7. Menu: Press this button to display the OSD MENU. Refer to the Using the OSD
Menu section of this chapter for operation and content of these menus.
8. Mode: This button switches between the SDI 1, SDI 2, AV (CVBS), and HDMI
signal inputs. Pressing the Mode button repeatedly will cycle between the input
sources.
9. F1/Up: The Up function is on the same button as the F1 function. When the
OSD MENU is displayed, this button navigates up through the menu and sub-
menu selections and can be used to adjust the settings. When the OSD MENU is
not displayed, pressing this button initiates the F1 function per its function key
menu setting.
10. F2/Down: The Down function is on the same button as the F2 function. When
the OSD MENU is displayed, this button navigates down through the menu and
sub-menu selections and can be used to adjust the settings. When the OSD
MENU is not displayed, pressing this button initiates the F2 function per its
function key menu setting.
11. F3: Pressing this button initiates the F3 function per its function key menu
setting.
12. F4: Pressing this button initiates the F4 function per its function key menu
setting.
On-Screen Display Features
unctions and parameters can be selected and adjusted using the On Screen
Display (OSD) MENU. Refer to the OSD Menus section of this chapter.
Overlays can be added by the operator for Area & Safety Markers, Center
Marker, and to display names as IMD (In Monitor Display) for identification.
Video effects such as Focus Assist, Image Flip, Image Freeze, and other
features can be used to assist setup.
Overscan, Underscan and Native modes control scaling and size of the video.
Audio level meter displays, for up to sixteen channels can be displayed,
positioned in the lower left corner of the display. They show VU and PPM (PK) with
a -18db reference level.
Waveform, ectorscope, and Histogram displays (choice of two) can be can be
positioned in any corner of the display.

Page
10
igure 2-2: Display eatures
1. Input Status: Displays the selected input and video parameters of vertical
active line count, (i)nterlaced or (p)rogressive, and field/frame rate in Hz.
This display may be active for a few seconds after a source is selected, or it
can be displayed all of the time. This selection is made in the SETTINGS
menu.
2. Ratio Marker: Used to mark an alternate aspect ratio area of the image.
You can set whether to display it in the DISPLAY menu.
3. Safe Zone Marker: This is used to mark a percentage area, inside of the
image, safe for titles to be located. You can set whether to display it in the
DISPLAY menu.
4. Center Marker: Cross hairs are displayed in the center of the screen,
marking the center of the image. You can set whether to display it in the
DISPLAY menu.
5. IMD: The OSD MENU provides settings to customize the IMD (In Monitor
Display) text area to show a static line of characters, numbers, and some
symbols or to receive dynamic messages to display. This can be set in the
TOOLS menu.
6. Audio Level Meters: Levels for the audio channels are displayed on up to
sixteen meters as left/right pairs. Up to sixteen meters can appear in the
lower left corner of the screen. This can be adjusted in the AUDIO menu.
7. Waveform/ ectorscope/Histogram: This can be displayed only for an
SDI signal. These input signal displays are configurable in the SIGNAL Menu.

Page
11
Rear Panel
igure 2-3: Rear Panel Layout
1. 3G-SDI In 1: This input connector accepts 3G/HD/SD-SDI video signals. It
is compliant with SMPTE 424M, SMPTE 259M, SMPTE292M/ITU-R BT601. It
can be viewed by making the SDI1 selection with the Mode button.
2. 3G-SDI Out 1: This connector provides a re-shaped and re-clocked
duplicate of the 3G-SDI In 1 signal. This connection is compliant with SMPTE
424M, SMPTE 259M, SMPTE292M/ITU-R BT601.
3. 3G-SDI In 2: This is the second 3G/HD/SD-SDI video signal input. This
connection is compliant with SMPTE 424M, SMPTE 259M, SMPTE292M/ITU-R
BT601. It can be viewed by making the SDI2 selection with the Mode
button.
4. 3G-SDI Out 2: This connector provides a re-shaped and re-clocked
duplicate of the 3G-SDI In 2 signal. This connection is compliant with SMPTE
424M, SMPTE 259M, SMPTE292M/ITU-R BT601.
Important:
The monitor and power adapter have been tested as a combined
apparatus to verify compliance with applicable safety and
electromagnetic compliance standards. Use of another power adapter
provided by the user may negate the compliance or not perform
properly. Wohler Technologies cannot accept any responsibility for the
outcome in such cases.
Important
:
By design, the suppl
ied AC mains power cord will only plug into a
three-prong grounded outlet for your safety. If the plug does not fit
into the outlet, contact an electrician to replace the obsolete outlet.
The symbol to the left warns of electric shock hazard inside or outside
the unit. Disconnect the power cord before removing access panels.

Page
12
5. C BS In: This is the input for an analog CVBS video signal. It can be viewed
making the AV selection with the Mode button.
6. C BS Out: The CVBS video signal is repeated on this output.
7. HDMI In: An HDMI input is provided. It uses an HDMI Type-A connector. It
can be viewed using the HDMI selection on the IN button menu.
8. HDMI Out: The HDMI input is repeated on this output.
9. L/R Audio In: A pair of stereo analog audio inputs are provided on RCA
jacks for use when the CVBS selection is made. They have a 20KΩ input
impedance and will accept up to a +5dBu signal.
10.Left and Right Speakers: The left and right monitoring speakers for the
unit are located on the rear panel.
11. Power Connector: The supplied 100 to 240VAC to 12VDC power supply
plugs into this coax connector.
12. Chassis Ground: This terminal may be used if needed to connect a
grounding wire to the chassis.
13. Ethernet: The 10/100M Ethernet connector is used to connect with a
computer to modify the display settings remotely. CAT5 network cables are
recommended for medium distances. CAT6 twisted pair shielded cables are
recommended for longer distances.
14. RS-485 In/Out: These RJ-45 jacks are used for dynamic Tally/IMD
controls. Two jacks are provided for in & out daisy chain arrangements.
They are wired identically. Refer to igure 2-5 below for the pinout and
Table 2-2 for terminal connections. These connections are also used for
system software upgrades. Either CAT5 or CAT6 cables may be used for
these jacks.
15. Tally: This RJ45 jack controls the tally lights on the front panel. Refer to
igure 2-4 for the pinout and Table 2-1 for the terminal connections. Either
CAT5 or CAT6 cables may be used for this jack.

Page
13
Rear Panel Connectors
The following figure and tables detail the connections of the Tally and RS-485
connectors on the rear panel. The tables are also silkscreened on the rear panel of
the unit for your convenience.
Table 2-1: Tally Connections
Pin Tally Terminal Name
1 CH1-R
2 CH2-R
3 CH3-R
4 NC
5 GND
6 CH1-G
7 CH2-G
8 CH3-G
igure 2-4: Tally Input & RS-485 I/O Pin-Out
Table 2-2: RS-485 I/O Connections
Pin RS-485 Terminal Name
1, 2 GND
3 Tx- (pair A)
4 Rx+ (pair B)
5 Rx- (pair B)
6 Tx+ (pair A)
7, 8 NC

Page
14
Using the olume Control and the OSD Menus
In the following descriptions, refer to igure 2-5 for the location of the control
buttons.
igure 2-5: Screen Control Buttons
Volume Control
The volume of the speakers and headphones can be quickly accessed by pressing
either the Left (<) or Right (>) buttons shown in igure 2-5. When not in the
OSD Menus, each press of the Left button will reduce the volume level and each
press of the Right button will increase the volume level. The olume Setting
Indicator appears on the screen to as the adjustment is made to provide a
graphical and numeric indication of the level. The range is 0 to 100. The olume
Setting Indicator appears as shown in igure 2-6.
igure 2-6: Volume Setting Indicator
Volume may be muted by pressing the Mute button shown in igure 2-5. This is an
alternate action button.
Audio Selection and Muting
The Mute button is also the Select button, selecting which screen's audio will be
monitored. A small audio monitoring symbol, as shown in igure 2-7, appears in the
upper right corner of the screen that is being audibly monitored.
igure 2-7: Audio Monitoring Symbol
When audio is being monitored, pressing the Mute button for that screen will mute
it and the audio monitoring symbol will disappear.

Page
15
OSD Menus
The OSD Menus allow you to adjust a wide variety of control parameters for the
monitor. Refer to Table 2-3 through Table 2-9 for typical values and domain
ranges. The following is a description of how to use the OSD Menus:
1. Press the Menu button to display the Main Menu.
2. Use the Up and Down buttons to navigate through the submenus.
3. Press the Right (>) button to enter the parameter selections in the chosen
submenu.
4. Use the Up or Down buttons to cycle through the submenu selections.
5. When the desired option is highlighted, press either the Left (<) or Right
(>) button to adjust it.
6. Press the Menu button to accept your parameter change.
7. Press the Menu button to back out of any submenu, and finally to remove
the OSD Menus from the screen.
OSD Menus
The following tables describe the information and settings available in the OSD
Menu system. Use the instructions in the previous section to navigate the menus.
Table 2-3: Image Menu Structure
Image
Parameters Default alue Domain Range Description
PIC MODE STANDARD
STANDARD
MILD
USER
DYNAMIC
Display only for the value
of the parameter.
BRIGHTNESS 50 0 - 100
CONTRAST 50 0 - 100
SATURATION 50 0 - 100
SHARPNESS 15 0 - 100
COLOR TEMP 6500
3200, 5000,
5600, 6500,
9300, USER
These parameters can
only be adjusted when
the USER PIC MODE is
selected.
RED 128 0 - 255
GREEN 109 0 - 255
BLUE 98 0 - 255
These parameters can
only be adjusted when
the USER COLOR TEMP is
selected.

Page
16
Table 2-4: Audio Menu Structure
Audio
Parameters Default alue Domain Range Description
AUDIO METERS O O SOLID
TRANSParent
Select the
appearance of the
audio meters.
AUDIO DISPLAY PR1 PR1, GP1, GP2, GP3,
GP4, GP1-2, GP1-4
Select the meter
source and which
channels to
display.
Table 2-5: Display Menu Structure
Display
Parameters Default alue Domain Range Description
ASPECT RATIO PANORAMA
PANORAMA
AUTO
4:3
16:9
ZOOM 1
ZOOM 2
JUST SCAN
Turn all markers on
or off.
ANAMORPHIC O
O
1.3X
2.0X
2.0X MAG
Adjust image so that
wide screen images
can be displayed.
ZOOM ACTOR O
O
4X
9X
16X
Magnify the image.
ZOOM ALL 0 0 - 100%
This setting adjusts
both the Vertical
Zoom and the
Horizontal Zoom
VERTICAL
ZOOM 0 0 - 100% Zooms vertically in
1% increments up to
100%.
HORIZONTAL
ZOOM 0 0 - 100%
Zooms horizontally in
1% increments up to
100%.

Page
17
CENTER
MARKER O O , ON Turn center marker display on or off.
SA E ZONE
MARKER O O , 80%, 85%, 90%, 93%, 96%
Set safety marker
size according to the
aspect ratio and scan
mode.
RATIO
MARKER O O , 4:3, 13:9, 14:9,
15:9, 16:9, 1.85:1,
2.35:1 Set area marker size.
IMAGE
REEZE O O , ON Stop image movement.
IMAGE LIP O O , H_V LIP, H LIP, V
LIP lip image in a variety of ways.
BACKLIGHT 100 10 - 100% Backlight brightness.
SCAN UNDER SCAN
UNDER SCAN
OVER SCAN Set scan mode.
Table 2-6: Signal Menu Structure
Signal
Parameters Default alue Domain Range Description
COLOR BAR O O , ON Enable or disable the
Color Bar display.
VECTOR
SCOPE O O , ON Enable or disable the Vector Scope display.
WAVE ORM O O , R, G, B, Y, Cb, Cr
Enable, disable, or
set the source of the
Waveform display.
HISTOGRAM O O , Y, R, G, B, RGB,
TINT
Enable, disable, or
set the source of the
Histogram display.
VECTOR
SCOPE POS TOP RIGHT
DOWN RIGHT
DOWN LE T
TOP LE T
TOP RIGHT
Location of the Vector
Scope on the screen.
WAVE ORM
POSITION TOP RIGHT
DOWN RIGHT
DOWN LE T
TOP LE T
TOP RIGHT
Location of the
Waveform display on
the screen.

Page
18
HISTOGRAM
POSITION DOWN RIGHT
DOWN RIGHT
DOWN LE T
TOP LE T
TOP RIGHT
Location of the
Histogram display on
the screen.
SCOPE
TRANSP. 50%
SOLID
25%
50%
75%
Adjust the
transparency of the
Vector Scope,
Waveform, and
Histogram displays.
Table 2-7: Tools Menu Structure
Tools
Parameters Default alue Domain Range Description
NO SIGNAL BLUE SCREEN
BLUE SCREEN
REC SCREEN
GREEN SCREEN
BLACK SCREEN
WHITE SCREEN
Set the screen color
displayed when there
is no video signal.
CHECK IELD O
O
MONO
RED
GREEN
BLUE
Enable or disable the
display of check
screen colors.
NATIVE
RESOLUTION O O , ON
OCUS
ASSIST O O , ON Provide highlights to assist in focusing.
MARKER
COLOR RED
RED
GREEN
BLUE
BLACK
WHITE
Select the color of
the on screen
markers.
MARKER
WIDTH 3 1 - 7 PIXELS Select the thickness
of the on screen
marker lines.
MARKER
EMPHASIS 1 0 - 6 Adjust the emphasis
of the Ratio Marker.
Refer to igure 2-8.
IMD ADD. 1 1 - 126 Set the address of
the IMD.
DISPLAY IMD
TEXT ON O , ON Set whether to display IMD text.

Page
19
IMD
PROTOCOL LOCAL LOCAL
TSL V3.1..
NETWORK
Set IMD text to local
or remote source.
BAUD RATE 115200
115200
57600
38400
19200
9600
4800
2400
Set BAUD rate for
TSL V3.1.. remote
IMD text.
MODI Y IMD RM-3270W-
3G2 0 - 16 CHARACTERS
* Enter local IMD text.
COLOR IMD RED
RED
GREEN
ORANGE
BLACK
WHITE
Set the color of the
IMD text.
BACKGROUND
IMD BLACK
O
RED
GREEN
ORANGE
BLACK
Add a colored box
behind the IMD text.
* To enter the characters for the MODI Y IMD setting, navigate to the setting
and press Right. Press Up or Down repeatedly to locate the first character and
press Right to move to the next character. Press Up or Down again repeatedly to
locate the second character and press Right. Repeat this process until all of the
characters (up to 16) have been entered. Press Left to go back and correct any
mistakes. Then press Menu to exit.
igure 2-8: Marker Emphasis Effect

Page
20
Table 2-8: Settings Menu Structure
Settings
Parameters Default alue Domain Range Description
LANGUAGE ENGLISH
ENGLISH
CHINESE
SPANISH
PORTUGUESE
RENCH
DUTCH
GERMAN
JAPANESE
Select the
language that is
used in the OSD
Menus.
OSD TRANS. O
O
LOW
MIDDLE
HIGH
Adjust the
transparency of
the OSD Menus.
MENU H POS 50 0 - 100
Adjust the
horizontal position
of the OSD Menus.
MENU V POS 50 0 - 100 Adjust the vertical position of the
OSD Menus.
MENU DWELL
TIME 30 SEC
O
10 SEC
20 SEC
30 SEC
Adjust the timer
for the OSD Menus
to disappear.
SIGNAL IN O 5 SEC
2 SEC
5 SEC
10 SEC
ON
Adjust the amount
of time that the
Signal Display
remains on the
screen.
USB UPGRADE
or use only when updating with a USB lash Drive
connected to the rear panel connector. ollow instructions in
the USB Upgrade section in this Chapter. **
RESET
Pressing the Right button when RESET is highlighted will
immediately reset all of the options back to factory settings.
Use with caution.
** Note: This menu also displays the current software version of the RM-3270W-3G
in the lower right corner of the screen.