Wolf 30BAK-SPLH/DF User manual

Warming Rack Model Numbers
•30BAK-SPLH/DF (804475) – 30" X
38" BACKSPLASH WITH 2 WARMING
RACKS
•36BAK-SPLH/DF (804476) – 36" X
38" BACKSPLASH WITH 2 WARMING
RACKS
•42BAK-SPLH/DF (804477) – 42" X
38" BACKSPLASH WITH 2 WARMING
RACKS
•48BAK-SPLH/DF (804478) – 48" X
38" BACKSPLASH WITH 2 WARMING
RACKS
•54BAK-SPLH/DF (804479) – 54" X
38" BACKSPLASH WITH 2 WARMING
RACKS
•60BAK-SPLH/DF (804480) – 60" X
38" BACKSPLASH WITH 2 WARMING
RACKS
•66BAK-SPLH/DF (804481) – 66" X
38" BACKSPLASH WITH 2 WARMING
RACKS
NOTE: The total height of the back-
splash with warming racks is 38".
Your Wolf backsplash with warming
racks is designed to be installed
under your Wolf Hood and extend
behind your Wolf cooking appliance.
•Warming Rack Kit Contains
(1) Warming Rack Panel
(1) Backsplash extension
(1) Lower mounting channel
(1) Upper mounting channel
(8) #10 hex head 2" long screws
(10) #6 countersunk flat head
Phillips 1/2" screws
Illustration 1
Install Warming Rack Panel
1. Align upper mounting channel with underside of hood. Allow a minimum of
1/8" between the bottom of the hood and top of the upper mounting chan-
nel. Attach mounting channel with (4) #10 hex head screws to wall framing.
Make sure upper mounting channel is level.
2. Align lower mounting channel with upper mounting channel. Allow
12-13/16" from top of the upper mounting channel to the bottom of the
lower mounting channel. Attach lower mounting channel with the remaining
(4) #10 hex head screws to wall framing. Make sure lower mounting channel
is level.
BACKSPLASH
EXTENSION
UPPER
MOUNTING CHANNEL
WARMING
RACK PANEL
LOWER
MOUNTING CHANNEL
WOLF WARMING RACK
INSTALLATION INSTRUCTIONS

3. Align warming rack panel mount-
ing holes with upper mounting
channel mounting holes. Install
(3) #6 countersunk flat head
screws along the top edge of the
warming rack panel through the
mounting holes on the top edge
of the upper mounting channel.
Also install (2) #6 countersunk flat
head screws (one on each side)
along the edge of the warming
rack panel through the side of the
upper mounting channel.
4. Locate top of backsplash exten-
sion. The top of the backsplash
extension has a small lip that runs
along the upper edge. Align top
of backsplash extension with
warming rack panel mounting
holes and lower mounting chan-
nel (see Illustration 2). Install (3)
#6 countersunk flat head screws
to install lip of backsplash to
underside of warming rack panel
and lower mounting channel.
5. Also install (2) #6 countersunk flat
head screws (one on each side)
along the edge of the warming
rack panel through the side of the
lower mounting channel.
Illustration 2
Illustration 3
IMPORTANT NOTE: There are no mounting holes along the bottom edge of the
backsplash extension. The cooking appliance should cover a portion of the back-
splash and keep it flush with the wall. If additional support is needed, a contact
adhesive may be used. Consult your local hardware store for details on back-
splash adhesives.
WALL
FRONT
UPPER
MOUNTING CHANNEL
12-13/16"
1/8" MINIMUM
FROM BOTTOM
OF HOOD TO
TOP OF UPPER
MOUNTING
CHANNEL
LOWER
MOUNTING CHANNEL
Wolf Appliance Company, LLC •P.O. Box 44848 •Madison, WI 53744 •800-332-9513 •www.wolfappliance.com
805543A 5/03
WOLF WARMING RACK
INSTALLATION INSTRUCTIONS