Wolf IF15/S User manual

Model IF15/S
Integrated Electric Fryer Module
The accurate temperature control of the
Wolf fryer module will enable you to seal
in that great flavor of the food without
absorbing any unnecessary grease. The
extremely deep fryer can handle large
portions of small food items or even a
whole chicken. Model IF15/S is available
in classic stainless steel and comes with
one large and two small fryer baskets.
Features
Integrated design allows for installation of
multiple cooktops or modules
Stainless steel top construction with
classic stainless steel finish
Hidden 2600-watt heating element
Illuminated electronic touch controls with
graduated control lighting
Large 11/4gallon capacity tub
Three baskets included—one large and
two small side by side, each with wire
basket hanger
Low-profile lid
Melt feature for shortening or lard
Independent digital timer
Digital temperature readout and preheat
indicator
Easy manual locking drain capability
Recommended for installation with any
Wolf framed electric cooktop or the Wolf
electric grill module
Accessories
Filler strip for installation of multiple
cooktops or modules
Accessories are available through your
Wolf dealer. To obtain local dealer information,
visit the Showroom Locator section of our
website, wolfappliance.com.
Model IF15/S
Stainless Steel Finish Classic
Model IF15/S
Model IF15/S shown installed with Model IG15/S
electric grill module and Model CT15G/S gas cooktop.
Classic Electronic Touch Controls

Installation Notes
IMPORTANT NOTE: This fryer module must
be installed at least 15" away from any open
flame cooking device. The open flame may
cause ignition of oil.
IMPORTANT NOTE: This fryer module must
be installed at least 15" away from a Wolf
steamer module, as contact between water
and hot oil may cause burns from steam and
hot oil.
Complete installation specifications can be
found on our website, wolfappliance.com.
Unit dimensions may vary by ±
1
/ 8 ".
Specifications
Exterior Finish Classic
Overall Width 15"
Overall Height 131/2"
Overall Depth 21"
Heating Element 2600 W
Recommended Cabinet Width
one module 18"
two modules 33"
Minimum Cabinet Depth 223/4"
Minimum Height Clearance 131/2"
Countertop Cut-Out Width 14"
Countertop Cut-Out Depth 191/4"
Electrical Requirements 240/208 V AC
60 Hz, 15 amp circuit
Conduit 4' flexible 3-wire
Electrical Rating 2.6 kW at 240 V
1.9 kW at 208 V
Shipping Weight 30 lbs
Installation Specifications
Overall Dimensions
Model IF15/S
Integrated Electric Fryer Module
Dimensions in parentheses are in
millimeters unless otherwise specified.
15" (381)
OVERALL WIDTH
21"
(533)
OVERALL
DEPTH
131/2" (343)
TO DRAIN
OUTLET
71/2"
(191)
7"*min (178)
CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
14" (356)
COOKTOP CUT-OUT
WIDTH
14" (356)
COOKTOP CUT-OUT
WIDTH
33" (838) RECOMMENDED
CABINET WIDTH
18"
(457)
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) cooktop or module. NOTE: Fryer module must be installed in a base cabinet with
access to manual valve at base of unit to drain oil into heat resistant receptacle. *Minimum clearance from both side edges of cooktop cut-out
to combustible materials up to 18" (457) above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up
to 18" (457) above countertop.
191/4" (489)
COOKTOP CUT-OUT
DEPTH
21/2"min
(64)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
13" max
(330) 30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
FRONT OF COUNTERTOP
21/2"min
(64)
191/4" (489)
COOKTOP
CUT-OUT DEPTH
75/8"
(194)
123/8"
(314)
DRAIN OUTLET
LOCATION
E
131/2"
(343)
15"
(381)
15"
(381)
123/8"
(314) 6"
(152)
DRAIN OUTLET
LOCATION
2"**
(51)
Countertop Cut-Out Dimensions