Wonwoo EB-363P User manual

High Resolution 700TVL
12x, 22x, 36x Zoom Camera
AUTO FOCUS ZOOM CAMERA
Distributed by
PRINTED IN KOREA
P/N : 388033235
Before installing, operating or adjusting this product,
please read this instruction booklet
carefully and completely.
INSTRUCTION MANUAL
//

The lightning flash with an arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product's enclosure
that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying
the product.
REGULATORY INFORMATION : FCC Part 15 WARNING -
Do not install this equipment in a confined
space such as a bookcase or similar unit.
Disposal of your old appliance
1.
When this crossed-out wheeled bin symbol
is attached to a product it means the product
is covered by the European Directive
2002/96/EC
2.
All electrical and electronic products should
be disposed of separately from the municipal
waste stream via designated collection facilities
appointed by the government or the local
authorities
3. The correct disposal of your old appliance
will help prevent potential negative conse-
quences for the environment and human
health
4.
For more detailed information about disposal
of your old appliance, please contact your
city office, waste disposal service or the shop
where you purchased the product.
To disconnect power from the mains, pull out the main
cord plug. When installing the product, ensure that the
plug
is easily accessible.
WARNING - Wiring methods shall be in accordance with
the National Electric Code, ANSI/NFPA 70.
WARNING - To reduce a risk of fire or electric shock, do
not expose this product to rain or moisture.
CAUTION - This installation should be made by a qualified
service personrel and should conform to all local codes.
CAUTION - To avoid electrocal shock, do not open the
cabinet. Refer servicing to qualified personnel only.
CAUTION - The apparatus should not be exposed to
water (dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on the apparatus.
WARNING - This is a class A product. In a domestic
environment this product may cause radio interference
in which case the user may be required to take adequate
measures.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION :
FCC WARING - This equipment may generate or use
radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless
the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
- A suitable conduit entries, knock-outs or glands shall
be provided in the cable entries of this product in the
end use.
- Holes in metal, through which insulated wires pass,
shall have smooth well rounded surfaces or shall
be provided with brushings.
03

1. Read these instructions - All these safety and operating
instructions should be read before the product is operated.
2. Keep these instructions - The safety, operating and user
instructions should be retained for future reference.
3. Heed all warnings - All warnings on the product and in
the operating instructions should be adhered to.
5. Do not use this apparatus near water - For example :
near a bath tub, wash bowl, kitchen sink, laundry tub,
in a wet basement, near a swimming pool, etc.
6. Clean only with dry cloth - Unplug this product from
the wall outlet before cleaning. Do not use liquid cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -
Slots and openings in the cabinet are provided for
ventilation, to ensure reliable operation of the product,
and to protect it from overheating. The openings should
never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should not
be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided and the
manufacturer’s instructions have been adhered to.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
4.
Follow all instructions - All operating and user instructions
should be followed.
9.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
10.
Only use attachments/accessories specified by the
manufacturer.
12. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
04 05
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS
11. Unplug this apparatus during lightning storms or
when unused for long periods of time.

06 07
CONTENTS FEATURES
Features
FEATURES.............................................................
CONTENTS ........................................................
SYSTEM CONFIGURATION.....................................
PART DETAILS .....................................................
MAIN MENU .........................................................
FOCUS ..............................................................
EXPOSURE .......................................................
WHITE BALANCE ..............................................
IMAGE ..............................................................
INTELLIGENCE ..................................................
SPECIAL FUNCTION ..........................................
DISPLAY ..........................................................
SPECIFICATION .....................................................
TROUBLESHOOTING .............................................
DRAWING .............................................................
7P
8P
9P
10P
12P
13P
15P
18P
19P
21P
23P
25P
26P
30P
31P
• 1/4" Sony Super HAD ⅡCCD (Double scan)
520K(NTSC)/610K(PAL) pixels
• 36x Optical Zoom / 22x Optical Zoom / 12x Optical Zoom
• High Resolution 700 TV lines : This camera has realized high resolution of more 700 TV lines.
• Day & Night (ICR)
The ICR will automatically engage depending on the ambient light, allowing the camera to be effective in day&night environment.
• Wide Dynamic Range(x512)
512 times WDR, more effectively than previous models, by applying an optimum fusion ratio when combining the high speed
shutter used in bright areas and the low speed shutter used in dark areas.
• Adaptive Tone Reproduction – Expanded (ATR-EX)
The ATR-EX function provides gradation compensation to improve the contrast. The Loss of dark detail and overexposure improve.
• Digital Noise Reduction(2D+3D)
The DNR technology eliminates noise thus generating a distinct and clear image. This camera DNR function utilizes both an adaptive 2D filter
reducing noise in the brightness of the image and an adaptive 3D filter reducing noise caused by movement.
• High Light Compensation (HLC) Function : The HLC function enhances the visibility of license plates and other objects by performing
suppression processing and mask processing on strong light sources (automobile headlights, etc.) in dark locations.
• Digital Image Stabilizer (DIS): The DIS function internally detects shaking of the image due to camera shaking, and performs digital
compensation processing to suppress this shaking and stabilize the image output.
• Privacy mask Function : The privacy zone function makes it possible to make specific areas of the scene from view.
• Intelligent motion detection : You can transmits an alert signal when it detects motion of an object on the screen. This feature is useful
when you have to monitor several screens simultaneously.
• Intelligent Object detection : You can transmits an alert signal when it detects absent of an object on the screen (or detect appearance of
an object on the screen). This feature is useful when you have to monitor several screens simultaneously.
• On Screen Display : This camera supports the OSD function which is used with multi language. And so, the camera can be controlled by
selecting text displayed on the monitor screen.
• Protocol : This camera supports the multi-protocol (VISCA, Pelco-D, Pelco-P)

08 09
CONTENTS SYSTEM CONFIGURATION
RS485
RS485
RS485
DVR
Keyboard
TV Monitor
VIDEO
VIDEO
VIDEO
High Resolution 700TVL
22x, 36x Zoom Camera
AUTO FOCUS ZOOM CAMERA
USER MANAUL
High Resolution 700TVL
22x, 36x Zoom Camera
AUTO FOCUS ZOOM CAMERA
USER MANAUL
[Contents 36x, 22x] [Contents 12x]
[Optional Remote Controller]
CAMERA
CAMERA
BRACKET HOLDER
SCREW
M2.6*4 CH/BK 4EA MANUAL
MANUAL
··
··
·
·
·
Not used
Far / Right
Tele/ Up
Menu/ Set
Wide / Down
Near / Left

10 11
PART DETAILPART DETAIL
③
⑦⑥
⑤
④
②
①
OSD / Zoom / Focus Control OSD / Zoom / Focus Control
Video : BNC Cable Video : BNC Cable
Power LED Power LED
Power : DC 12V Power : DC 12V
Control Terminal Control Terminal
AD key (IRC-300) AD key (IRC-300)
① OSD / Zoom / Focus control
② Video : BNC Cable
③ AD Key
1: GND
2: AD-key
3: GND
④ Power LED
⑤ Cable Distance
When the distance is far from camera to monitor,
set 2 or 3.
⑥ Control Terminal
1: RS-485 (+)
2: RS-485 (-)
3: Motion Detection Out
4: Object Detection Out
5: Day&Night Input (Low : Night, High : Day)
6: Ground
7: Zoom (+ : Tele, - :Wide)
8: Focus (+ : Near, - : Far)
9: Common
⑦ Power : DC12V
① OSD / Zoom / Focus control
② Video : BNC Cable
③ AD Key
1: GND
2: AD-key
3: GND
④ Power LED
⑤ Cable Distance
When the distance is far from camera to monitor,
set 2 or 3.
⑥ Control Terminal
1: RS-485 (+)
2: RS-485 (-)
3: Motion Detection Out
4: Object Detection Out
5: Day&Night Input (Low : Night, High : Day)
6: Ground
⑦ Power : DC12V
( For 36x, 22x ) ( For 12x )

12 13
MAIN MENU
[MENU]
[EXIT] [SAVE] [DFLT]
FOCUS
EXPOSURE
WHITE BAL
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
Functions can be setup using “Menu Key Command” of Visca protocol.
The Menu consists of the “Main Menu” and “Sub Menu”.
The main menu is displayed where 7 camera functions can be selected.
To the right of each main menu selection, the sub-menu is displayed
If you want to save the menu, select [SAVE].
If you want not save the menu, select [EXIT] (After select , Power off -> on)
If you want to default the menu, select [DFLT]
Main Menu FOCUS
FOCUS
[MENU]
[EXIT] [SAVE] [DFLT]
FOCUS
EXPOSURE
WHITE BAL
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
[BACK] [SAVE] [DFLT]
[FOCUS]
MODE
DISTANCE
LENS REFRESH
E.ZOOM
HOME POSITION
AUTO
0.1m
ONE PUSH
OFF
OFF
· MODE : Select auto focus mode
▶AUTO, ONE PUSH, MANUAL
· DISTANCE : Select minimum distance in focus
between camera and object.
▶0.1 / 1.3 / 1.8 / 3.0 / 5.0 m (36x)
▶0.1 / 1.0 / 1.5 / 2.5 / 6.0 m (22x)
▶0.1 / 1.0 / 1.3 / 2.0 / 6.0 m (12x)
· LENS REFRESH : Lens origin calibrated automatically.
▶ONE PUSH↲/ 1 day ~ 10 days
· E.ZOOM : Select maximum digital zoom magnification.
▶OFF / ON (max x2 ~ x19, x21, x23, x25, x28, x32)

14 15
FOCUS EXPOSURE
[EXPOSURE]
· HOME POSITION : Select zoom home position function.
The camera returns to the home position if a certain amount
of time elapses without any operation being performed.
▶OFF / ON
▷SET ZOOM POS : Set zoom position as the home
position.
▷DURATION : Select the duration time.
▶5/10/15/20/25/30/35/40/45/50/55/60 sec
EXPOSURE
[MENU]
[EXIT] [SAVE] [DFLT]
FOCUS
EXPOSURE
WHITE BAL
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
[BACK] [SAVE] [DFLT]
[EXPOSURE]
MODE
AGC
SHUT SPEED
IRIS
DSS
FLICKERLESS
BRIGHTNESS
WDR
BLC
DAY&NIGHT
·MODE : Select exposure mode
▶AUTO / SHUT.P / IRIS.P / MANUAL
·AGC : Select Auto Gain Control
▶OFF / ON (AUTO, SHUT.P or IRIS.P Mode)
▶0/2/4/6/8/10/12/14/16/18/20/22/24/26/28/30dB
(MANUAL Mode)
·SHUT SPEED : Can be set in SHUT.P or MANUAL mode.
▶NTSC : x512, x128, x64, x32, x16, x8, x4, x2, 1/60, 1/90, 1/100, 1/180, 1/250, 1/500, 1/1000, 1/1500,
1/2000, 1/5000, 1/10000, 1/20000, 1/50000, 1/100000 sec
▶PAL : x512, x128, x64, x32, x16, x8, x4, x2, 1/50, 1/80, 1/120, 1/150, 1/250, 1/500, 1/1000, 1/1500,
1/2000, 1/5000, 1/10000, 1/20000, 1/50000, 1/100000 sec
※Slow shutter speed (x2 ~ x512) can be set in MANUAL mode.
AUTO
ON
...
...
OFF
OFF
8
OFF
OFF

·DAY&NIGHT : Select Day&Night
▶MODE : Select Day&Night mode
▷ DAY / NIGHT / AUTO / EXT
▶DELAY : Adjust the working time of the filter when Day&Night operated.
▷ 5/10/15/20/25/30/35/40/45/50/55/60 sec
▶THRS : Day↔Night switching level in Auto Mode.
Switching in lower lux with higher threshold level.
▷ 1 ~ 29 steps
▶GAP : Margin between Day →Night switching level and Night →Day switching level.
▷ 1 ~ 5 steps
※When you set up GAP too narrow, hunting might be happened.
▶BURST : You can burst off/on in Night mode
▷ OFF / ON
16 17
EXPOSURE SETTING EXPOSURE SETTING
·IRIS : Iris level can be set in IRIS.P or MANUAL mode.
▶1 ~ 18 steps
·DSS : Select Max DSS (Digital Slow Shutter)
▶ OFF / x2, x4, x8, x16, x32, x64, x128, x512
·FLICKERLESS : Select Flickerless mode
▶ OFF / ON (remove screen flicker)
·BRIGHTNESS : Adjust brightness level
▶1 (dark) ~ 15 (bright) steps
·WDR : Select WDR (Wide Dynamic Range)
▶OFF / ON
▷ LEVEL : Select the WDR brightness level
▶1 ~ 7 steps
▷ ATR : Select the contrast level of dark area.
▶ LOW / MID / HIGH
· BLC : Select BLC (Back Light Compensation)
▶ OFF / ON
▷ MODE : Select BLC mode
▶ AUTO / MANUAL
▷ AREA# : Select BLC area
▶ 1 ~ 9 areas
▷LEVEL : Select manual BLC level
▶ LOW / MID / HIGH

18 19
WHITE BALANCE IMAGE
[MENU]
[SAVE] [DFLT]
FOCUS
EXPOSURE
WHITE BAL
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
[BACK] [SAVE] [DFLT]
[WHITE BALANCE]
MODE
RED GAIN
BLUE GAIN
CHROMA
ATW
...
...
MID
·MODE : Select white balance mode
▶ ATW / ONE PUSH / INDOOR / OUTDOOR / MANUAL / AUTO
▷ATW : Automatically adjusts color according to the available lighting.
▷ONE-PUSH : It is a fixed white balance mode that may be automatically readjusted only by pressing
SET Button in ONE PUSH mode.
▷ OUTDOOR : Set color temperature to be Outdoor light (5400°K.)
▷ INDOOR : Set color temperature to be Indoor light (3200°K.)
▷ MANUAL : Color can be corrected when the user increases or decreases” Red Gain" or "Blue Gain".
▷ AUTO : Wide color temperature range (more ATW range)
·RED GAIN : Adjust R gain value (0 ~ 255)
·BLUE GAIN :Adjust B gain value (0 ~ 255)
·CHROMA : Select the chroma level
▶ LOW / MID / HIGH
WHITE BALANCE
[MENU]
[EXIT] [SAVE] [DFLT]
FOCUS
EXPOSURE
WHITE BAL
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
[BACK] [SAVE] [DFLT]
[IMAGE]
HLC
DNR
HR
MIRROR
SHARPNESS
EFFECT
FREEZE
·HLC : Enhances the visibility on strong light sources in dark locations
▷MODE : Select the HLC mode
▶OFF / ON
▷LEVEL : Select the HLC brightness level
▶LOW / MID / HIGH
▷CLIP LEVEL : You can adjust the HLC threshold level.
Block area is to be more sensitivity with lower level.
▶1 ~ 7 steps
·DNR : On screen digital noise reduction
▶OFF
/ 1 ~ 10 : Select noise reduction level
/ Auto : DNR level is adjusted automatically
·HR : Select high resolution
▶ OFF / 1 ~ 7
IMAGE
[EXIT]
AUTO
OFF
OFF
8
OFF
OFF

20 21
IMAGE
[MENU]
[EXIT] [SAVE] [DFLT]
FOCUS
EXPOSURE
WHITE BAL
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
[BACK]
[INTELLIGENCE]
PRIVACY
MOTION
OBJECT
·MIRROR : Select a flip mode
▶OFF
/ V (You can flip the picture vertically on the screen)
/ H (You can flip the picture horizontally on the screen)
/ H&V (You can flip the picture horizontally & vertically on the screen)
· SHARPNESS : Adjust sharpness level
▶1 ~ 16 steps
·EFFECT : Select the negative or B/W effect
▶OFF / NEGATIVE / B/W
·FREEZE : Select real or still mode
▶OFF / ON
· PRIVACY : Hide an area you want to hide on the screen
▶MASK# : Select mask area number (1 ~ 16)
▶ACT : Mask enable or disable (OFF / ON)
▶COLOR : Select mask color (1 ~ 14)
▶TRANSPARENCY : Select mask transparency level (0 ~ 3)
▶POSITION : Adjust the mask position
▶SIZE : Adjust the mask size
▶MOSAIC : Mosaic display (OFF / ON)
▶MOSAIC TYPE : Mosaic roughness setting (1 ~ 8)
· MOTION DET : When there is movement of the subject in the screen, there will be a motion detection.
▶MODE : MD function enable or disable (OFF / ON)
▶AREA# : Select MD area number(1 ~ 3)
INTELLIGENCE
INTELLIGENCE

22 23
SPECIAL FUNCTION
[MENU]
[EXIT] [SAVE] [DFLT]
FOCUS
EXPOSURE
WHITE BAL
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
INTELLIGENCE
▶ACT : Activate or deactivate the each MD Area (OFF / ON)
▶SENSITIVITY : Adjust sensitivity of MD (1 ~ 20)
▶INTERVAL TIME : Select the alarm interval time (1 ~ 256sec)
▶DWELL TIME : Select the duration time about changing MD mode (1 ~ 256sec)
▶POSITION : Adjust the MD position
▶SIZE : Adjust the MD size
▶SET ZOOM POS : Select zoom position to move when alarm is occurred
· OBJECT : Detect object appeared or removed the screen
▶MODE : Object detection enable or disable OFF / ON
▶AREA# : Select OD Area number (1 ~ 9)
▶SENSITIVITY : Adjust sensitivity (1 ~ 5)
▶DWELL TIME : Select the duration time about changing OD mode (1 ~ 256sec)
▶SET ZOOM POS : Select zoom position to move when alarm is occurred
· DIS : Select the DIS (Digital Image Stabilizer) mode
▶OFF / ON
※E.Zoom, Motion & Object detection could not turn on while DIS function is working.
· DEFECT DET : Executes white pixel compensation.
▶ONE PUSH↲
· DEFECT LEVEL : The Threshold level of white pixel compensation.
▶1 ~ 20
· SCENE MODE : Select scene preset
▶USER / NORMAL / TRAFFIC / BACK LIGHT/ DAY/NIGHT / CASINO
SPECIAL FUNCTION
[BACK] [SAVE] [DFLT]
[SPECIAL FUNC]
DIS
DEFECT DET
DEFECT LEVEL
SCENE MODE
COMM
OFF
ONE PUSH
1
USER

DISPLAY
24 25
[MENU]
[EXIT] [SAVE] [DFLT]
FOCUS
EXPOSURE
WHITE BAL
IMAGE
INTELLIGENCE
SPECIAL FUNC
DISPLAY
[BACK] [SAVE] [DFLT]
[DISPLAY]
DISP SEL
INIT SEL
SET TITLE
SET INIT MSG
LANGUAGE
SETUP STATUS
·INIT SEL : Select items to display on the screen while power on initializing time.
▶OFF / ON
▷ID : OFF / ON
▷BAUDRATE : OFF / ON
▷PROTOCOL : OFF / ON
▷VERSION : OFF / ON
▷INIT MSG : OFF / ON
·SET TITLE : Select camera title menu (Text edit)
·SET INIT MSG : Select camera initial message menu (Text edit)
·LANGUAGE : Select language
▶ENGLISH / KOREAN / CHINESE
·SETUP STATUS : Shows the current OSD Menu setup status and compare the each values with
the ones in Factory default.
·DISP SEL : Select display item.
▶OFF / ON
▷ID : OFF / ON
▷TITLE : OFF / ON
▷ZOOM RATIO : OFF / ON
·COMM : Set up the camera ID, baud rate, protocol
▷ID : Select the camera ID
▶1 ~ 255
▷BAUD RATE : Select serial communication speed
▶2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200 bps
▷PROTOCOL : Select operating protocol
▶VISCA / Pelco-D / Pelco-P
SPECIAL FUNCTION
DISPLAY
Function Normal Traffic Back
Light Day/ Night Casino
AE Mode Auto Auto Auto Auto Auto
WDR OFF OFF ON OFF OFF
DSS Max 4x Max 2x Max 4x Max 4x Max 4x
D&N Mode Auto Auto Day Auto Day
Burst OFF ON OFF OFF OFF
AWB Mode(Day) ATW Auto Auto Auto Auto
Mode(Night) ATW ATW Auto ATW Auto
OFF
OFF
ENGLISH

26 27
SPECIFICATIONSPECIFICATION
x36 Day & Night Zoom Lens
Optical x36, Digital x32 Zoom
f = 3.4 mm ~ 122.4 mm
F1.6 (wide) ~ F4.5 (tele)
EB-363P
Image Sensor
Total Pixels
Scanning system
Scanning Frequency
Sync. System
Resolution
Min. illumination
Video Output
S/N Ratio
1/4" SONY Super HADⅡ(Double Scan) CCD
NTSC : 1028(H) × 508(V) / PAL : 1028(H) x 596(V)
2:1 Interlace
NTSC : 15.734KHz(H),59.94Hz(V) / PAL : 15.625KHz(H),50Hz(V)
Internal / External (V-Lock)
Max 700 TV lines in color @ HR 7 mode
(750TV lines in B/W @ HR 7 mode)
Color : 0.5 lux , BW : 0.2 lux
Color DSS : 0.001 lux , BW DSS : 0.0004 lux
1.0 Vp-p (75 ohm, composite)
more than 50dB (AGC off)
MODEL 36x
Lens type
Zoom Ratio
Focal Length
Aperture Ratio
LENS
x12 Day & Night Zoom Lens
Optical x12, Digital x32 Zoom
f = 3.8 mm ~ 45.6 mm
F1.6 (wide) ~ F2.7 (tele)
22x 12x
x22 Day & Night Zoom Lens
Optical x22, Digital x32 Zoom
f = 3.9 mm ~ 85.8 mm
F1.6 (wide) ~ F3.7 (tele)
EB-363PMODEL 36x 22x 12x
Focus
Focus Distance
E.Zoom
Home Position
Exposure
Gain Control
Shutter Speed
Iris
Digital Slow Shutter
Flickerless
Brightness
WDR
BLC
Day&Night
White Balance
Chroma
Image
HLC
DNR
Auto / One Push / Manual
Off / Max x2 ~ x32
Off / On
Auto / Shutter PRI / Iris PRI / Manual
Off / On (Max 30dB)
NTSC : 1/60 ~ 1/100,000 sec / PAL : 1/50 ~ 1/100,000 sec
1 ~ 18
Off / Max x2 ~ x512
Off / On
1 ~ 15 steps
Off / On
Off / On
Day / Night / Auto / Ext
ATW / One Push / Indoor / Outdoor / Manual / Auto
Low / Mid / High
DNR / HR / Mirror / Sharpness / Effect / Freeze
Off / On
Off / Manual / Auto
0.1 / 1.3 / 1.8 / 3.0 / 5.0 m 0.1 / 1.0 / 1.5 / 2.5 / 6.0 m 0.1 / 1.0 / 1.3 / 2.0 / 6.0 m

28 29
SPECIFICATION SPECIFICATION
MODEL 36x 22x 12x
Off / 1 ~ 7 steps
Off / V / H / H&V
1 ~ 16 steps
Off / Negative / B/W
Off / On
Privacy / MD / OD
Off / 16 positions
Off / 3 positions
Off / On
Sync / Phase / Scene Mode / Comm
INT / LL
NTSC : 0 ~ 131 steps / PAL : 0 ~ 156 steps
Off / On
User / Normal / Traffic / Back Light / Day/Night / Casino
Baud Rate : 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200
Protocol : VISCA / Pelco-D / Pelco- P
Disp Sel / Init Sel / Set Title / Set Init Msg / Language / Setup Status
ID / Title / Zoom Ratio
ID / Baud Rate / Protocol / Version / Init Msg
Text Edit
Text Edit
HR
Mirror
Sharpness
Effect
Freeze
Intelligent
Privacy Mask
Motion Detection
Object Detection
Special
Sync Mode
Phase
DIS
Scene Mode
Comm
Display
Disp Sel
Init Sel
SET Title
SET Init Msg
MODEL 36x 22x 12x
English / Chinese / Korean
Setup Status List
0 ~ 9 , A ~ Z , a ~ z
Language
Setup Status
OSD Text
MODEL 36x 22x 12x
DC12V±10%
Max 350mA
DC12V±10%
250mA
64(W) x 68(H) x 119.30(D)
346g
44W x 54L x 44H
106g
Power Source
Power Consumption
ELECTRICAL
DC12V±10%
500mA
Power Input
Video Output
Operating Temperature
Operating Humidity
Storage Temperature
External Dimension
Weight
GENERAL
50W x 84L x 58H
226g
Connector
Connector
-10℃~ +50℃
0 ~ 96% (non-condencing)
-20℃~ +60℃

30 31
DRAWING
TROUBLESHOOTING
• Nothing appears on the screen.
-Please check the power connection.
-Please check the video signal line connection.
• The video image is not clear.
-Please clean the lens with a clean cloth or brush.
-Please adjust that the screen is not exposed directly to a bright light.
-Please move the camera if necessary.
• The screen is dark.
-Please adjust the contrast feature of the monitor.
-If you have an intermediate device, set the 75 Ω/Hi-Z properly, and check the terminals.
-Please adjust the brightness level.
• The MOTION DETECTION function is not working
-Please check if “MOTION DETECTION” mode is turned on.
-Please check if the MD Sensitivity is too low.
-Please check the setting of the MD AREA.
• The WDR function is not working
-Please check if the WDR Level is too low.
-Please check if the AE Mode is set to MANUAL. The WDR doesn’t work in MANUAL Exposure mode.
• Colors are not quite right.
-Please check if the camera is facing directly into sunlight or fluorescent light.
• The Day&Night function doesn’t work.
- Please check if the AGC of EXPOSURE menu is set to OFF.
- The Auto Day&Night doesn’t work in AGC OFF status.
Trouble shooting
If there are problems in operation, please refer to the items below.
If the problem persists, please contact the agent you purchased this product from. A -TYPE
Unit : mm
113.30 6.00
119.30
14.00
20.50 16.00
64.00
68.00
35.0033.00

32 33
DRAWINGDRAWING
B-TYPE ( For 12x)
Unit : mm
119.2
110.3 8.9
32.0 34.5
61.8
66.5
20.5 16.0
14.0
Unit : mm