5
www.woodbridgebath.com
R
WOODBRIDGE REMOTE CONTROL ILLUSTRATION
energy saver icon
9:00 15:00
ENERGY SAVER 3 H
Usage Instruction
The toilet enters the
energy saver
mode from 9:00 to 15:00.
Energy saver light is on
Energy saver time
ENERGY
SAVER
Energy saver
Setting energy saver time
Press “ENERGY SAVER” button, LCD screen shows energy saver and figures. It
shows three options of energy saver period as 3-6-9-off, which can be selected
accordingly. For example, user can set from 9:00 to 15:00 as energy saver
according to following operation.
(1)Press“ENERGY SAVER”button, LCD screen shows
“ENERGY SAVER” icon.
(2)Press“ENERGY SAVER”button again, LCD screen shows figure “6”, and the “ENERGY SAVER”icon
disappear after 3 seconds, the setting succeeds. The toilet enters the energy saver mode from 9:00 to
15:00 every day. During this period, power light is off, and the energy saver light is on. It goes back to
normal operation mode after energy saver time.
Energy saver:
The toilet will be under energy saver mode automatically after setting. Under energy saver mode,
seat temperature is on low temperature status (first level) to achieve energy saver.
Notice:
If user sits on the seat, the energy saver mode is paused, and enters into the function mode, the
seat starts to heat immediately (under opening seat temperature circumstance). The energy saver mode
restores after user leaves.
When the energy saver mode is set, the icon disappears automatically, which is normal set.
(3)Cancel energy saver set: Press“ENERGY SAVER”button continuously until this function is
cancelled. (Nothing display on the screen.)
ENERGY SAVER 6 H
ENERGY SAVER
POWER
DRY SEAT
PRESSURE POSITION
WATER
DRY SEAT
PRESSURE POSITION
WATER
