Wipe clean with a damp cloth, or shampoo using upholstery shampoo. A mild citrus cleaner
The castors should be kept clear of threads or other objects that would inhibit their movement
Vacuum regularly. Protect from direct sunlight.
Care and maintenance
2
Tips before you start
1For the protection of your furniture, we recommend that the product is placed on a protected surface
during assembly to prevent any damage
2Please check that all parts are present before you start the assembly of your furniture.
3For ease and speed of assembly, we recommend that you identify all the parts required
for each
step before commencing with assembly.
4For larger items, please ensure that you have sufficient space and people (as indicated on page 1)
to assemble your product safely.
5 We recommend that, where possible, all items are assembled near to the area in which they will
be placed in use, to avoid moving the product unnecessarily.
6 During assembly please take care not to over-tighten hardware, as this may damage the product.
Do not use power tools.
7Always place the product on a steady and stable surface.
8 Do not stand on the product. Do not use the product as a stepladder.
9This product is intended for indoor, household use only as it is a non-industrial product.
10 Please use caution and care when lifting the product to avoid personal injury and/or product damage.
AFTER SALES SUPPORT
0800 222 246NZ
We recommend computer users adopt an open-angle sitting positiwith knees slightly lower than hips.
Always sit near the back of your seat.
Adjust your backrest angle and seat height to a position that allows you to sit close to your workstation.
Your feet should be flat on the floor or on a footrest. There should be no pressure under your thighs.
Seating posture
may
Please periodically check all things and re-tighten as necessary.
Please do not place hot items (eg.Hot drinks) directly on to the surface.
Please do not drag and pull your furniture.
also be used.
