Worth Data LZ165-USB User manual

*USBLASERSCANNERS*
Worth Data® USB Laser Scanners
QuickStart and Installation Guide
USB Lasers
The Full USB Laser Scanners Users Manual is available on the Utilities CD-R M
in PDF format. You can also download the Manual and Setup Menus at
http://www.worthdata.com
WARNING: This equi ment generates, uses and can radiate radio frequency energy. If not installed and used in accordance with the instruc-
tion manual, it may cause interference to radio communications. It has been tested and found to com ly with the limits for a Class A com-
uting device ursuant to Sub art J of Part 15 of FCC Rules, which are designed to rovide reasonable rotection against such interference
when o erated in a commercial environment. O eration of this equi ment in a residential area is likely to cause interference in which case
the user, at his own ex ense, will be required to take whatever measures may be required to correct the interference.
PROPOSITION 65 WARNING: This roduct, its ackaging, and/or com onents may contain chemicals known to the state of California to
cause cancer or birth defects or other re roductive harm

Introduction
Worth Data's Laser Scanners are USB bar code readers that attach as a USB
HID keyboard on a computer running Windows®, mac S or Linux. The USB
Laser Scanner provides bar code input data to any host computer program
exactly as if the data had been typed at the keyboard, including function and
control keys.
USB Laser Scanner Components
In the event the shipping box shows damage on arrival, please note the damage
on the carrier's receipt log. pen the box and inspect the contents for damage.
If there is visible damage, or if the unit fails to work, contact us with the details
of the trouble; we will be happy to send you a replacement.
Your USB Laser Scanner shipment should include some or all of the fol-
lowing:
1. A LZ165-USB, or LZ365-USB Laser Scanner.
2. A cable for attaching the Laser Scanner to your computer.
a C40 (USB) cable, or a C45 USB Cable/Endcap installed
3. A Laser Scanner Desk/Wall Mount Holder
4. A Utilites & Manuals CD-R M with PDF Setup menus
USB Laser Scanner Installation
When you plug the Reader into any USB port on a computer running
Windows® 10, 8, 7, Vista, XP, mac S, Mac S X or Linux, the system
will sense the new USB device and proceed to install the necessary soft-
ware. Some versions of Windows will ask for the
original Windows CD to install the needed USB
drivers - be prepared. There are no additional driv-
ers needed other than what is already available
standard in Windows or mac S.
To install the USB Laser Scanner:
1. Plug the flat USB connector end of the cable into an available USB
port on the host computer or USB hub.
2. The computer will sense the USB device and install the necessary soft-
ware. The necessary drivers are already located on your hard drive or
installation CD in both Windows and the Mac. In Windows, simply click
“Next”or press ENTER at each prompt, including putting in your Windows
CD if prompted, until the
installation is complete.
If you have a problem with
your Windows USB installa-
tion, please see Appendix I,
Resolving USB Installation
Issues in the USB Laser
Scanners Users Manual on the
Utilites CD for details - the
manual can also be downloaded
from our website at:
www.barcodehq.com/downloads.html
LZxxx-USB Reader
USB Installation
CLASS II LASER