Worx WG770E Installation manual

Cordless Lawn Mower WG770E WG770E.9
SAFETY AND OPERATING MANUAL

14
13
1
2
3
8
10
11
12
9
6 7
4
5

1
3
1
2
100%
0%
2
1
2
1
2
2
14
1
13
1
2
2
1
12
1
A1 A2
BC1
C2
C4C3
D1 D2
E
F1 F2
F3 F4
G1 G2

1
3
1
2
100%
0%
2
1
2
1
2
2
14
1
13
1
2
2
1
12
1
A1 A2
BC1
C2
C4C3
D1 D2
E
F1 F2
F3 F4
G1 G2

1
3
1
2
100%
0%
2
1
2
1
2
2
14
1
13
1
2
2
1
12
1
A1 A2
BC1
C2
C4C3
D1 D2
E
F1 F2
F3 F4
G1 G2

ECO
ECO
TURBO
ECO
TURBO
TURBO
17
18
1615
K
M-1
M-2
M-3
12345671——20mm
2——30mm
3——40mm
4——50mm
5——60mm
6——70mm
7——80mm
1
2
3
2
1
1
G3 H
KL
M
N2 O1
O2 O3
N1
I J

ECO
ECO
TURBO
ECO
TURBO
TURBO
17
18
1615
K
M-1
M-2
M-3
12345671——20mm
2——30mm
3——40mm
4——50mm
5——60mm
6——70mm
7——80mm
1
2
3
2
1
1
G3 H
KL
M
N2 O1
O2 O3
N1
I J

Cordless Lawn Mower WG770E WG770E.9
8
1. OPERATING DAIL
2. SAFETY KEY
3. INTELLICUT DIAL
4. BATTERY HOUSING COVER
5. SIDE-DISCHARGE COVER
6. WASHOUT PORT
7. CUTTING HEIGHT ADJUSTMENT LEVER
8. SAFETY FLAP
9. GRASS COLLECTION BAG
10. HANDLE BAR
11. HANDLE QUICK ADJUST LEVER
12. BATTERY POWER INDICATOR
13. SIDE-DISCHARGE CHUTE
14. MULCHING PLUG
15. BLADE BOLT (See Fig. N1)
16. BLADE (See Fig. N1)
17. FAN (See Fig. N1)
18. SPACER (See Fig. N1)
Not all the accessories illustrated or described are included in standard delivery.

Cordless Lawn Mower WG770E WG770E.9
9
TECHNICAL DATA
Type WG770E WG770E.9 (770-789- designation of machinery, representative of
Cordless Lawn Mower)
WG770E WG770E.9
Voltage 40V Max*
Cutting diameter 48cm
Cutting height 20-80mm
Cutting height positions 7
Grass collection capacity 50L
Battery capacity 2Ah /
Battery type Lithium-Ion /
Battery model WA3536 /
Charging time 1hr (Per Battery pack) /
Charger model WA3735 /
Charger rating Input: AC 100-240V~ 50/60Hz
Output: 40V DC, 2.0A /
Machine Weight 25kg 23.8kg
* Voltage measured without workload. Initial battery voltage reaches maximum of 40 volts.
Nominal voltage is 36 volts.
ACCESSORY
WG770E WG770E.9
Battery pack WA3536 2 /
Charger WA3735 1 /
Grass collection bag 1 1
Side-discharge chute 1 1
Mulching plug 1 1
We recommend that you purchase your accessories from the same store that sold you the tool.
Use good quality accessories marked with a well-known brand name. Choose the type according
to the work you intend to undertake. Refer to the accessory packaging for further details. Store
personnel can assist you and offer advice.

Cordless Lawn Mower WG770E WG770E.9
10
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
Carefully read the instructions for the
safe operation of the machine.
Save all warnings and instructions for
future reference.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
The appliance is only to be used with
the power supply unit provided with the
appliance.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safe operation practices
TRAINING
a) Read the instructions carefully. Be familiar
with the controls and the proper use of the
equipment;
b) Never allow children or people unfamiliar
with these instructions to use the
lawnmower. Local regulations can restrict
the age of the operator;
c) Never mow while people, especially
children, or pets are nearby;
d) Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their property
PREPARATION
a) While mowing, always wear substantial
footwear and long trousers. Do not
operate the equipment when barefoot or
wearing open sandals;
b) Thoroughly inspect the area where the
equipment is to be used and remove
all objects which can be thrown by the
machine;
c) Before using, always visually inspect to
see that the blades, blade bolts and cutter
assembly are not worn or damaged.
Replace worn or damaged blades and
bolts in sets to preserve balance; Replace
damaged and unreadable labels.
d) On multi-bladed machines, take care as
rotating one blade can cause other blades
to rotate.
OPERATION
a) Mow only in daylight or in good artificial
light;
b) Avoid operating the equipment in wet
grass, where feasible;
c) Always be sure of your footing on slopes;
d) Walk, never run;
e) For wheeled rotary machines, mow across
the face of slopes, never up and down;
f) Exercise extreme caution when changing
direction on slopes;
g) Do not mow excessively steep slopes;
h) Use extreme caution when reversing or
pulling the lawnmower towards you;
i) Stop the blade(s) if the lawnmower has to
be tilted for transportation when crossing
surfaces other than grass, and when
transporting the lawnmower to and from
the area to be mowed;
j) Never operate the lawnmower with
defective guards, or without safety
devices, for example deflectors and/or
grass catchers, in place;
k) Switch on the motor carefully according to
instructions and with feet well away from
the blade(s);
l) Do not tilt the lawnmower when switching
on the motor, except if the lawnmower
has to be tilted for starting In this case, do
not tilt it more than absolutely necessary
and lift only the part which is away from
the operator; Always ensure that both
hands are in the operating position before
returning the lawnmower to the ground.
m) Do not put hands or feet near or under
rotating parts. Keep clear of the discharge
opening at all times;

Cordless Lawn Mower WG770E WG770E.9
11
n) Not to touch the blades before the
disabling device has been removed and
the blades have come to a complete stop;
o) Do not start the lawnmower when
standing in front of the discharge opening.
p) Do not transport the lawnmower while the
power source is running.
q) To remove the disabling device
– Whenever leaving the machine
unattended,
– Before clearing a blockage,
– Before checking, cleaning or working on
the machine,
– After striking a foreign object. Inspect the
machine for damage and make repairs
before restarting and operating the
lawnmower
If the lawnmower starts to vibrate abnormally
(check immediately)
– Inspect for damage.
– Replace or repair any damaged parts.
– Check and tighten any loose parts.
MAINTENANCE AND STORAGE
a) Keep all nuts, bolts and screws tight to
be sure the equipment is in safe working
condition;
b) Check the grass catcher frequently for
wear or deterioration;
c) Replace worn or damaged parts for safety.
Use only genuine replacement parts and
accessories.
d) Be careful during adjusting of the
lawnmower to prevent entrapment of the
fingers between moving blades and fixed
parts of the lawnmower.
e) Always allow the lawn mower to cool
down before storing.
f) When servicing the blades be aware that,
even though the power source is switched
off, the blades can still be moved.
g) For rotary mowers, ensure that only
replacement cutting means of the right
type are used.
SAFETY WARNINGS FOR
BATTERY PACK
a) Do not dismantle, open or shred cells
or battery pack.
b) Do not short-circuit a battery
pack. Do not store battery packs
haphazardly in a box or drawer where
they may short-circuit each other
or be short-circuited by conductive
materials. When battery pack is not
in use, keep it away from other metal
objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that
can make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
c) Do not expose battery pack to
heat or fire. Avoid storage in direct
sunlight.
d) Do not subject battery pack to
mechanical shock.
e) In the event of battery leaking, do not
allow the liquid to come into contact
with the skin or eyes. If contact has
been made, wash the affected area
with copious amounts of water and
seek medical advice.
f) Seek medical advice immediately
if a cell or battery pack has been
swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with
a clean dry cloth if they become
dirty.
i) Battery pack needs to be charged
before use. Always refer to this
instruction and use the correct
charging procedure.
j) Do not maintain battery pack on
charge when not in use.
k) After extended periods of storage,
it may be necessary to charge
and discharge the battery pack
several times to obtain maximum
performance.
l) Battery pack gives its best
performance when it is operated at
normal room temperature (20°C ± 5°C).
m)When disposing of battery packs,

Cordless Lawn Mower WG770E WG770E.9
12
SYMBOLS
Read instruction handbook
before operation this
machine
Only use the battery charger
indoors
Keep bystanders away
Beware of sharp blades.
Blades continue to rotate
after the motor is switched
off- Remove disabling device
before maintenance.
Do not expose to rain or
water
Do not burn
C-tick marking
ABN: Australian Business
Number, according to which
business details such as
business name and address
can be found at website
http://abr.business.gov.au
Remove the key
Remove battery from the
socket before carrying out
any adjustment, servicing or
maintenance.
keep battery packs of different
electrochemical systems separate
from each other.
n) Recharge only with the charger
specified by WORX. Do not use any
charger other than that specifically
provided for use with the equipment.
A charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
o) Do not use any battery pack which
is not designed for use with the
equipment.
p) Keep battery pack out of the reach of
children.
q) Retain the original product literature
for future reference.
r) Remove the battery from the
equipment when not in use.
s) Dispose of properly.

Cordless Lawn Mower WG770E WG770E.9
13
INTENDED USE
This product is intended for domestic lawn
mowing.
ASSEMBLY & OPERATION
Action Figure
ASSEMBLE
Assembling the handle bar See Fig. A1
Adjustment Handle’s height See Fig. A2
Assembling the grass
collection bag See Fig. B
Assembling the Grass
Collection Bag to the Lawn
Mower
See Fig. C1,
C2, C3
REMOVING/EMPTYING the
grass collection bag See Fig. C4
Installing
Side-discharge chute See Fig.D1, D2
Installing Mulching Plug See Fig. E
Removing the battery pack
Note: The Battery Pack is
shipped uncharged.The
Battery must be fully charged
before the first mow.
See Fig. F1
Checking the battery charge
condition
See Fig. F2
Charging the battery pack
More details can be found in
WA3735’s manual
See Fig. F3
Fitting the battery pack
Note: The mower can be
used with one or two battery
pack(s).
See Fig. F4
OPERATION
Starting See Fig. G1, G2
Stopping See Fig. G3
Selecting the WORK MODE
DIAL
ECO MODE
Select ECO mode when
mowing in everyday
conditions when the
maximum grass height is
20mm or less.
TURBO MODE
Set the dial toTURBO mode
when cutting dense or
overgrown grass.
See Fig. H
Battery Power indicator on
machine See Fig. I
AdjustingThe Cutting Height See Fig .J
CleaningThe Mower
WARNING: Plug the hose on
the Washout port first, then
start the mower.
See Fig
. K
Storage See Fig. O1,
O2, O3
MULCHING MOWING TIPS
While mulching, your new mower is
designed to cut the grass clippings into
small pieces and distribute them back into
the lawn. Under normal conditions, the
mulched grass will biodegrade quickly and
deliver nutrients to the lawn. Please review
the following recommendations for optimum
mulching performance.
1) Avoid mowing when the grass is wet
from rain or dew. Wet grass may form
clumps which interfere with the mulching
action and reduce the runtime.The best
time to mow the grass is in the late
afternoon when the grass is dry and the
newly cut area will not be exposed to
direct sunlight.
2) For the best mulching performance, set
the cutting height to remove about one
third of the grass blade length, ideally no
more than 40mm at one time. If the lawn
is overgrown, it may be necessary to
increase the cutting height to reduce the
pushing effort and prevent overloading
the motor. For extremely heavy mulching,
it is advisable to first cut at a high cut
height setting, and then re-cut to the final

Cordless Lawn Mower WG770E WG770E.9
14
cut height. Otherwise, make narrower
cuts and mow slowly.
3) For the best performance, keep the
mower housing free of built-up grass.
From time to time turn off mower and
wait for the blades to come to a complete
stop.Then unplug the safety key and turn
mower on its side. Using an object such
as a stick, wipe out any accumulation of
grass around the blade area. Be careful
of the sharp edges of the blade. Ensure
to clean the blade area often when
cutting wet or new grass and every time
after the machine is used.
4) Certain types of grass or grass conditions
may require that an area be mulched a
second time to fully disperse the grass
throughout the lawn. If cutting a second
time, it is advisable to cut perpendicular
(across) the first cut pattern. DO NOT
CHANGE CUT PATTERN IN ANY WAY
THAT WOULD CAUSE MOWING DOWN A
HILL.
5) Change your cutting pattern from week
to week.This will help prevent matting
and graining of the lawn.
MAINTENANCE
WARNING: Stop the mower and
remove the safety key before
removing the grass bag.
NOTE: To ensure long and reliable service,
perform the following maintenance
procedures regularly. Check for obvious
defects such as a loose, dislodged or a
damaged blade, loose fittings, and worn
or damaged components. Check that the
covers and guards are all undamaged and
are correctly attached to mower. Carry out
any necessary maintenance or repairs before
operating mower. If the mower should
happen to fail despite regular maintenance,
please call our customer helpline for advice.
BLADE SHARPENING
KEEP BLADE SHARP FOR BEST MOWER
PERFORMANCE. A DULL BLADE DOES
NOT CUT GRASS CLEANLY OR MULCH
PROPERLY.
WEAR PROPER EYE PROTECTION
WHILE REMOVING, SHARPENING, AND
INSTALLING BLADE. ENSURETHAT SAFETY
KEY IS REMOVED.
Sharpening the blade twice during a mowing
season is usually sufficient under normal
circumstances. Sand causes the blade to dull
quickly. If your lawn has sandy soil, more
frequent sharpening may be required.
REPLACE BENT OR DAMAGED BLADE
IMMEDIATELY.
WHEN SHARPENING THE BLADE:
(See Fig. L)
1. Make sure blade remains balanced.
2. Sharpen blade at the original cutting
angle.
3. Sharpen cutting edges on both ends
of blade, removing equal amounts of
material from both ends.
Note:
1. Be sure the mower is turned off and
remove the key.
2. Place the mower in stand up storage
mode.
BLADE BALANCING (See Fig. M)
To check the balance of the blade, place
the center hole of the blade M-1 on a nail
or screwdriver shank M -2 that is securely
clamped horizontally in a vice M-3., If either
end of the blade rotates downward, file that
end.The blade is properly balanced when
neither end drops.
BLADE MAINTENANCE (See Fig. N1, N2)
Replace your metal blade after 50 hours
of use or 2 years, whichever is the sooner-
regardless of the condition.
Follow these procedures to remove and
replace the blade. You will need garden
gloves (not provided) and a spanner wrench
(not provided) to remove the blade. Hold the
blade (15) and unscrew the blade bolt (17)
counter-clockwise using a spanner wrench,
and then remove blade and fan.
To re-assemble, position the blade and fan (16)
with the cutting edges towards the ground.
Then securely tighten the blade bolt (14).

Cordless Lawn Mower WG770E WG770E.9
15
STORAGE: (See Fig. O1, O2, O3 )
Stop the mower and always remove the
safety key. Clean the exterior of the machine
thoroughly using a soft brush and cloth. Do
not use water, solvents or polishes. Remove
all grass and debris, especially from the
ventilation slots.
Turn the machine on its side and clean the
blade area. If grass cuttings are compacted
in the blade area, remove with a wooden or
plastic implement.
Store the machine in a dry place. Do not
place other objects on top of the machine.
To aid storage, press the Handle quick adjust
lever and fold the handle to the position.
Then the mower could stand to save space.

Copyright © 2015, Positec. All Rights Reserved.
2CLM10BPK11010A0
www.worx.com