wurth ISS 35-S User manual

701 135 BA 0103
Bedienungsanleitung
Bedienungsanleitung
Operating Instructions
Notice d’utilisation
Instrucciones para el manejo
Instruções de utilização
Istruzioni d‘uso
Gebruiksaanwijzing
Betjeningsvejledning
Bruksanvisning
Bruksanvisning
Käyttöohje
Οδηγίεσ χειρισµού
Kullanım kılavuzu
Industriestaubsauger ISS 35(-S)/ISS 55-S
Industrial vacuum cleaner ISS 35(-S)/ISS 55-S
Aspirateur industriel ISS 35(-S)/ISS 55-S
Aspirador industrial ISS 35(-S)/ISS 55-S
Aspirador industrial ISS 35(-S)/ISS 55-S
Aspiratori industriali ISS 35(-S)/ISS 55-S
Industriestofzuiger ISS 35(-S)/ISS 55-S
Industristøvsuger ISS 35(-S)/ISS 55-S
Industridammsugare ISS 35(-S)/ISS 55-S
Industristøvsuger ISS 35(-S)/ISS 55-S
Teollisuuspölynimuri ISS 35(-S)/ISS 55-S
Βιοµηχανικσ απορροφητήρασ ISS 35(-S)/ISS 55-S
Sanayi tipi elektrik süpürgesi ISS 35(-S)/ISS 55-S
ISS 35_55 - Titel/Inhalt Seite 1 Donnerstag, 12. Juli 2001 7:47 07

Würth-Euro • BA 701 135 BA 0103 • OSW 03/01
ISS 35_55 - Buch Seite 3 Donnerstag, 8. März 2001 2:29 14

Würth-Euro • BA 701 135 BA 0103 • OSW 03/01
A B
C
1
2
3
D
E F
ISS 35_55 - Buch Seite 4 Donnerstag, 8. März 2001 2:29 14

Würth-Euro • BA 701 135 BA 0103 • OSW 03/01
G
4
H
5
6
J
4
K
7
8
I
L
ISS 35_55 - Buch Seite 5 Donnerstag, 8. März 2001 2:29 14

11
701 135 BA 0103
Tool Specifications
Industrial vacuum cleaner
ISS 35 ISS 35-S ISS 55-S
Article number 701 135 701 136 701 155
Input power 1200 W 1200 W 1200 W
Drum capacity
Gross 34 l 34 l 55 l
Wet 20 l 20 l 44 l
Air flow 72 l/s 56 l/s 56 l/s
Vacuum 178 mbar 235 mbar 235 mbar
Surface of the
flat pleated filter 0.5 m
20.5 m20.5 m2
Dimensions (L x W x H) 505 x 370 x 535 mm 505 x 370 x 535 mm 570 x 370 x 860 mm
Weight approx. 9.5 kg approx. 9.5 kg approx. 14 kg
Safety class / II œ / I œ / I
Working safely with this machine
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions contained therein are strictly
followed. In addition, the general
safety instructions in the enclosed
booklet must be followed. Before
using for the first time, ask for a
practical demonstration.
If the mains cable is damaged or cut
through while working, do not
touch the cable but immediately pull
the mains plug. Never use the ma-
chine with a damaged cable.
❏During vacuuming it is not permitted to ever re-
move the flat pleated filter.
❏The paper filter bag or the membrane filter
(special accessories) must be removed whenev-
er vacuuming wet dirt.
❏In the case of non-conductive fluids (e. g. drill-
ing emulsions, oils and greases), the unit is not
switched off when the container is full. The fill
level must be regularly checked and the con-
tainer emptied before it is too full.
❏Use only original Würth parts and accesso-
ries.
For Your Safety
GB
☞Use only original Würth parts and accessories
ISS 35_55 - Buch Seite 11 Donnerstag, 8. März 2001 2:29 14

12
701 135 BA 0103
Operating Controls
1 On/Off switch
2 Switch for manual/automatic operation mode
3 Socket for power tool
4 Filter dedusting lever
5 Brush inserts
6 Squeegee inserts
7 Flat pleated filter
8 Exhaust air filter
Not all of the accessories illustrated or described are included
as standard delivery.
Intended Use
The unit is designed for vacuuming dry, non-inflam-
mable, health hazardous dust from machines and
devices.
For damage caused by usage other then intended,
the user is responsible.
Before Use
Check for correct mains voltage: The voltage of the
power source must match the voltage specified on
the nameplate of the machine. Equipment marked
with 230 V can also be connected to 220 V.
Fitting the paper filter bag (Figure A)
– Unlock and remove the suction head.
– Attach the paper filter bag.
– Replace the suction head and lock it in place.
Initial Operation
Switching On and Off (Figure B)
– Insert the power plug.
– Switch on the machine and start using it.
– In manual operation mode the switch 2 (Fig. C)
must be in the upper position.
Dry Vaccuming
Manual mode
During vacuuming it is not permitted to ever remove
the flat pleated filter.
A paper filter bag or a diaphragm filter (special ac-
cessories) can additionally be used to vacuum fine
dust.
Automatic mode (ISS 35-S and ISS 55-S)
– Plug the electric tool‘s power plug into the vacuum
cleaner ( 3, Figure C).
– Switch the unit on ( 1).
– The switch 2 must be in the lower position.
☞The vacuum cleaner is automatically
switched on and off with the electric tool.
The vacuuming device has a start-up delay
of up to 0.5 s and a maximum running down
time of up to 15 s.
Electrical tools of 100 - 2200 W can be con-
nected to the unit.
– Adapt the connection sleeve to the electric tool's
terminal connection (Figure D).
– Remove the pipe bend from the suction hose
(Figure E).
– Mount the connection sleeve to the suction hose.
– Connect the connection sleeve to the electric tool
(Figure F).
Filter cleaner
Your vacuum cleaner is provided with a new type of
filter cleaner – especially effective for fine dust.
The flat pleated filter is automatically cleaned (puls-
ing sound) by an air blast if you press the remote
control at the hand grip for several seconds.
Switching on the filter cleaning system
(Figure G)
– Slide setting 4 - downwards
Actuate the filter cleaning system in regular in-
tervals, both during vacuuming operation and
when finishing work. The dust-producing pow-
er tool/machine is to be switched off during fil-
ter dedusting.
The filter cleaning system is continuously active,
when operating air and power tools with extreme
narrow vac port cross-sections. In this case, switch
off the filter cleaning system and use only for short
periods, as required.
ISS 35_55 - Buch Seite 12 Donnerstag, 8. März 2001 2:29 14

13
701 135 BA 0103
Wet Vacuuming
Fitting rubber squeegees (Figure H)
– Dismantle the strip brush 5.
– Fit the rubber 6 squeegees.
☞The profiled surface of the rubber squeegees
must be on the outside.
– Remove the paper filter bag.
– Lug in the power plug.
– Switch on the machine and start using it.
ISS 55-S:
– Drain dirty water using the drain hose (Figure I).
The flat pleated filter must never be removed
when vacuuming.
The paper filter bag or the membrane filter
(special accessories) must be removed whe-
never vacuuming wet dirt.
In the case of non-conductive fluids (e. g.
drilling emulsions, oils and greases), the unit
is not switched off when the container is full.
The fill level must be regularly checked and
the container emptied before it is too full.
Switching off the filter cleaning system
(Figure J)
– Setting of the slide 4 - upwards.
☞When vacuuming wet dirt with the upholstry
nozzle or the crevice tool, or when mainly
picking up water from out of a container, it
is recommended to switch off the filter clean-
ing system.
The unit turns itself off automatically when
the max. liquid level has been reached.
Switch the unit off and empty the container.
After wet vacuuming, clean and dry the flat
pleated filter, the electrodes and the drum.
ISS 35_55 - Buch Seite 13 Donnerstag, 8. März 2001 2:29 14

14
701 135 BA 0103
Trouble Shooting
If a fault occurs (e.g. a torn filter), the unit must be immediately switched off. The fault must be remedied
before restarting.
The suction turbine does not run – Check the cable, plug, fuse and socket.
– Switch the unit on.
The suction turbine switches off – Empty the container.
The suction turbine does not restart following
emptying of the container – Switch the unit off and wait for 5 s, switch it on
again after 5 s.
– Clean the electrodes as well as the space between
them.
The suction power decreases – Remove possible clog-ups or obstructions from suc-
tion nozzle, extension wand, hand grip filter clean-
ing system, suction hose or flat pleated filter.
– Replace the paper filter bag.
– Dedust the flat pleated filter: Actuate the filter clean-
ing system at the hand grip several times.
– Engage the filter cover properly.
– Replace the flat pleated filter.
Dust is ejected during vacuuming – Check the proper mounting position of the flat
pleated filter.
– Replace the flat pleated filter.
Automatic cut-out (wet vacuuming) defective – Clean the electrodes as well as the space between
them.
– Constantly check the filling level when working with
an electrical non-conductive fluid.
Filter cleaning system switches on and off continuously – Detach the blocked suction nozzle or the end of the
hose.
– End continuous vacuuming operation out of a fluid
container, or switch off the filter cleaning system re-
spectively (see Chapter “Wet Vacuuming”).
– Remove possible clog-ups or obstructions from suc-
tion nozzle, extension wand, hand grip filter clean-
ing system, suction hose or flat pleated filter.
– Replace the flat pleated filter.
ISS 35_55 - Buch Seite 14 Donnerstag, 8. März 2001 2:29 14

15
701 135 BA 0103
Maintenance and Cleaning
❏Before any work on the machine itself, pull the
mains plug.
Replace the flat pleated filter or the exhaust
air filter (Figure K)
– Open the filter cover.
–Replace the flat pleated filter 7 or the exhaust air
filter 8.
– Close the filter cover, it must engage audibly.
Cleaning the electrodes (Figure L)
– Unlock and remove the suction head
– Clean the electrodes
– Replace the suction head and lock it in place
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorized customer services
agent for Würth power tools.
In all correspondence and spare parts orders,
please always include the 6-digit order number giv-
en on the nameplate of the machine.
Environmental Protection
Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Guarantee
For this Würth machine, we provide a 12-month
guarantee against material and workmanship de-
fects from the date of purchase (verified by invoice
or delivery document). Damage that has occurred
will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the device is sent un-
disassembled to a Würth branch office, your Würth
sales representative or a customer service agent for
Würth power tools.
Noise/Vibration Information
Measured values determined according to
EN 60 704-2-1.
Typically the A-weighted sound pressure level of the
tool is 63 dB (A).
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents:
EN 60 335-1, EN 60 335-2-69, EN 55 014-1,
EN 55 014-2, EN 61 000-3-2, EN 61 000-3-3 ac-
cording to the provisions of the directives
98/37/EC, 73/23/EEC (changed by 93/68/EEC),
89/336/EEC (changed by 91/263/EEC,
92/31/EEC, 93/68/EEC).
01
Adolf Würth GmbH & Co. KG
Rolf Bauer ppa. Otto Steck
Subject to change without notice
ISS 35_55 - Buch Seite 15 Donnerstag, 8. März 2001 2:29 14

WÜRTH • 701 135 BA 0103 • ISS 35/55 • 01/03
Niederlassungen:
Aachen
Jülicher Straße 236-248
52070 Aachen
Telefon [phone]
Telefax (02 41) 16 71 79
Aalen
Robert-Bosch-Straße 47
73431 Aalen
Telefon [phone]
Telefax (0 73 61) 4 62 55
Augsburg
Flotowstraße 15
86368 Gersthofen
Handwerk Metall:
Telefon [phone]
Telefax (08 21) 2 97 61 50+51
Bad Mergentheim
Industriepark Würth, Gebäude 1
97980 Bad Mergentheim
Telefon [phone]
Telefax (0 79 31) 92 40 59
Bayreuth
Hasenweg 6
95448 Bayreuth
Telefon [phone]
Telefax (09 21) 7 92 05 50
Berlin
Spandauer Damm 60-64
14059 Berlin-Charlottenburg
Telefon [phone]
Telefax (0 30) 32 67 83 51
Berlin
Grenzgrabenstraße 4
13053 Berlin-Hohenschönhausen
Telefon [phone]
Telefax (0 30) 98 60 01 50
Berlin
Symeonstraße 10
12279 Berlin-Marienfelde
Telefon [phone]
Telefax (0 30) 72 09 03 50
Berlin
Osramhöfe
Seestraße/Oudenarderstraße 16
13347 Berlin-Reinikendorf
Telefon [phone]
Telefax (0 30) 45 08 27 53
Biberach
Riss-Center
Riss-Straße 19
88400 Biberach
(Eröffnung: ca. Sept. 2001)
Bielefeld
Obere Hillegosser Str. 37
33699 Bielefeld
Telefon [phone]
Telefax (05 21) 9 24 18 27
Bochum
Harpener Feld 27
44805 Bochum
Telefon [phone]
Telefax (02 34) 3 38 85 51
Böblingen
Hanns-Klemm-Straße 46
71034 Böblingen-Hulb
Telefon [phone]
Telefax (0 70 31) 2 11 76 50
Brandenburg
Geschwister-Scholl-Str. 36
14776 Brandenburg a. d. Havel
Telefon [phone]
Telefax (0 33 81) 2 52 00
Braunschweig
Hansestraße 66
38112 Braunschweig
Telefon [phone]
Telefax (05 31) 3 54 78-90
Bremen
Gewerbegebiet Bayernstraße
Straubinger Straße 11
28219 Bremen
Handwerk Metall:
Telefon [phone]
Telefax (04 21) 3 99 88 51
Chemnitz
Gewerbegebiet
Südring/Neefestraße
Carl-Hamel-Straße 5
09116 Chemnitz
Telefon [phone]
Telefax (03 71) 2 71 47 50
Cottbus
Gewerbegbiet
An der Reichsbahn
Am Gleis 15
03042 Cottbus-Sandow
Telefon [phone]
Telefax (03 55) 7 56 61 50
Crailsheim
Industriegebiet Zur Flügelau
Roßfelder Straße 60
74564 Crailsheim
Telefon [phone]
Telefax (0 79 51) 96 37 50
Darmstadt
Weiterstadt Park
Brunnenweg 19
64331 Weiterstadt
Telefon [phone]
Telefax (0 61 50) 18 18 50
Dortmund
Wilhelmstraße 35A
59439 Holzwickede
Eröffnung: ca. Sept. 2001
Dresden
Malterstraße 37
01159 Dresden
Heizung/Sanitär:
Telefon [phone]
Telefax (03 51) 4 14 53-50
Düsseldorf
Lierenfelder Straße 53
40231 Düsseldorf
Postfach 105 532
40046 Düsseldorf
Telefon [phone]
Telefax (02 11) 9 73 06 50
Erfurt
Über dem Feldgarten 11
99198 Erfurt-Linderbach
Telefon [phone]
Telefax (03 61) 4 20 57 50
Essen
Heinz-Bäcker-Straße 15
45356 Essen
Telefon [phone]
Telefax (02 01) 8 66 45 50
Frankfurt
Daimlerstraße 19
63110 Rodgau
Handwerk Metall:
Telefon [phone]
Telefax (0 61 06) 84 01 51
Frankfurt/Oder
Gewerbegebiet Markendorf
Bertha-von-Suttner-Straße 14
15236 Frankfurt/Oder
Telefon [phone]
Telefax (03 35) 5 21 88 50
Freiburg
Industriegebiet Nord
Mitscherlichstraße 5
79108 Freiburg
Handwerk Metall:
Telefon [phone]
Telefax (07 61) 5 59 66 50
Gera
Gewerbegebiet Bieblach Ost
Heinz-Hertz-Straße 14
07552 Gera
Telefon [phone]
Telefax (03 65) 4 37 28 50
Gießen
Gewerbegebiet Gießen-West
Robert-Bosch-Str. 16
35398 Gießen
Telefon [phone]
Telefax: (06 41) 9 62 36 50
Göppingen
Industriegebiet Ost
Heilbronner Straße 12
73037 Göppingen
Telefon [phone]
Telefax (0 71 61) 6 89 00
Goslar
Gewerbegebiet Baßgeige
Alte Heerstraße 15
38644 Goslar
(Eröffnung: ca. Sept. 2001)
Hamburg
Industriegebiet Nettelkrögen
Gutenbergring 44
22848 Norderstedt
Telefon [phone]
Telefax (0 40) 53 43 61-50
Hannover
Gewerbegebiet Godshorn
Bayernstraße 37
30855 Langenhagen-Godshorn
Telefon [phone]
Telefax (05 11) 7 86 80 50
Heilbronn
Dieselstraße 8
74076 Heilbronn
Telefon [phone]
Telefax (0 71 31) 95 56 50
Ingolstadt
Eriagstraße 8
85053 Ingolstadt
Telefon [phone]
Telefax (08 41) 9 31 87 51
Jena
Löbstedter Straße 80
07749 Jena
Telefon [phone]
Telefax (0 36 41) 45 12 50
Karlsruhe
Printzstraße 2a
76139 Karlsruhe
Handwerk Metall:
Telefon [phone]
Telefax (07 21) 6 25 22 50
Kassel
Industriegeb. Waldau West
Otto-Hahn-Str. 18
34123 Kassel
Telefon [phone]
Telefax (05 61) 9 98 68 50
Kempten
Messerschmittstraße 16
87437 Kempten
Telefon [phone]
Telefax (08 31) 5 74 48 50
Kiel
Seekoppelweg 7a
24113 Kiel
Telefon [phone]
Telefax (04 31) 6 47 40 50
Koblenz
Auf dem Hahnenberg 51
56218 Mülheim-Kärlich
Telefon [phone]
Telefax (0 26 30) 94 70 50
Köln
Köhlstraße 43
50827 Köln-Ossendorf
Telefon [phone]
Telefax (02 21) 95 64 42 50
(08 00) 8 65 13 90
Künzelsau-Gaisbach
Verkaufsniederlassung
Schliffenstraße 22
74653 Gaisbach
Telefon [phone]
Telefax (0 79 40) 15 45 55
Leipzig
Zum Bahnhof 20
04178 Leipzig/Rückmarsdorf
Telefon [phone]
Telefax (03 41) 4 90 14 40
Würth Service-Container
Am Airport 2000
Postfach 12 44
04029 Leipzig
Telefon [phone]
Telefax (03 41) 2 24 19 77
Funk (01 70) 6 33 70 73
Leonberg
Hertichstraße 10
71229 Leonberg-Eltingen
Telefon [phone]
Telefax (0 71 52) 9 28 24 29
Ludwigsburg
Mörikestraße 28/1
71636 Ludwigsburg
Telefon [phone]
Telefax (0 71 41) 56 46 99
Lübeck
Taschenmacherstraße 10
23556 Lübeck
(Roggenhorst-Nord)
Telefon [phone]
Telefax (04 51) 8 71 92 50
Magdeburg
Silberbergweg 29
39128 Magdeburg
Telefon [phone]
Telefax (03 91) 2 55 87 50
Mannheim
Fraunhoferstraße 7
68309 Mannheim
Telefon [phone]
Telefax (06 21) 7 27 46 50
Minden
Ringstraße 49-51
32427 Minden
(Eröffnung: ca. Sept. 2001)
Mönchengladbach
Gewerbegebiet Engelbleck
Borsigstraße 13
41066 Möchengladbach
Telefon [phone]
Telefax (0 21 61) 4 77 69 50
(08 00) 7 24 16 70
München
Am Lenzenfleck 2
85737 Ismaning
Handwerk Metall:
Telefon [phone]
Telefax (0 89) 96 07 03 50
München 2
Ridlerstraße 65
80339 München
Telefon [phone]
Telefax (0 89) 43 19 72 50
Münster
Harkortstraße 11
48163 Münster
Telefon [phone]
Telefax (02 51) 71 76 31
Neubrandenburg
Gerstenstraße 2
17034 Neubrandenburg
Telefon [phone]
Telefax (03 95) 4 30 48 50
Nordhausen
Freiherr-vom-Stein-Straße 30c
99734 Nordhausen
Telefon [phone]
Telefax (0 36 31) 47 89 50
Nürnberg
Lenkersheimer Straße 16
90431 Nürnberg
Handwerk Metall:
Telefon [phone]
Telefax (09 11) 9 31 92-50
Offenburg
Robert-Bosch-Straße 2
77656 Offenburg-Elgersweier
Telefon [phone]
Telefax (07 81) 9 69 84 50
Oldenburg
Ammerländer Heerstaße 246
26129 Oldenburg
Telefon [phone]
Telefax (04 41) 77 74 61
Olpe
Industriegebiet Auf der Mark
Glück-Auf-Weg 3
57482 Wenden-Gerlingen
Telefon [phone]
Telefax (0 27 62) 98 94 56
Osnabrück
Hettlicher Masch 12
49084 Osnabrück
Telefon [phone]
Telefax (05 41) 9 09 01 50
Paderborn
Frankfurter Weg 70-7
33106 Paderborn
(Eröffnung ca. Nov. 2001)
Passau
Regensburger Straße 14
94036 Passau
Telefon [phone]
Telefax (08 51) 9 56 62 50
Pforzheim
Gewerbegebiet
Wilferdinger Höhe
Rastatter Straße 36
75179 Pforzheim
Telefon [phone]
Telefax (0 72 31) 56 87 99
Potsdam
Am Verkehrshof 1
14478 Potsdam
Telefon [phone]
Telefax (03 31) 8 88 84 50
Regensburg
Franz-Hartl-Straße 4
93053 Regensburg
Handwerk Metall:
Telefon [phone]
Telefax (09 41) 7 83 98 50
Reutlingen
Industriegebiet West
Ferdinand-Lasalle-Straße 55
72770 Reutlingen
Handwerk Metall:
Telefon [phone]
Telefax (0 71 21) 56 95 50
Rodgau
siehe bei Frankfurt/Main
Rostock
Gewerbegebiet
Neu-Roggentiner Straße 4
18184 Roggentin
Telefon [phone]
Telefax (03 82 04) 6 16 50
Saarbrücken
Im Rotfeld 21
66115 Saarbrücken
Handwerk Holz/Bau:
Telefon [phone]
Telefax (06 81) 9 48 65-50
Schwäbisch Hall
Industriegebiet Hessental-Ost
Schmollerstraße 41
74523 Schwäbisch Hall
Telefon [phone]
Telefax (06 91) 4 07 23 50
Schwerin
Robert-Stock-Straße 6
19061 Schwerin
Telefon [phone]
Telefax (03 85) 6 46 71 50
Siegen
(Kaan-Marienborn)
Hauptstraße 84
57074 Siegen
Handwerk Metall:
Telefon [phone]
Telefax (02 71) 6 60 49 20
Sinsheim
In der Au 22
74889 Sinsheim
(Eröffnung ca. Nov. 2001)
Stuttgart
Kölner Straße 10
Hallschlag
70376 Stuttgart
Handwerk Metall:
Telefon [phone]
Telefax (07 11) 9 55 73 50
Trier
Ohmstraße 9
54292 Trier
(Eröffnung: ca. Sept. 2001)
Ulm/Neu-Ulm
Carl-Zeiss-Straße 3
89231 Neu-Ulm
Telefon [phone]
Telefax (07 31) 9 78 98 50
Urbach
Schorndorfer Straße 22
73660 Urbach
Telefon [phone]
Telefax (0 71 81) 48 86 56
Villingen-Schwenningen
Industriegebiet Vockenhausen
Heinrich-Hertz-Straße 9
78052 VS-Villingen
Telefon [phone]
Telefax (0 77 21) 87 19 50
Weingarten/Ravensburg
Hähnlehofstraße 5
88250 Weingarten
Telefon [phone]
Telefax (07 51) 55 15 03
Wiesbaden
Hagenauer Straße 17-19
65203 Wiesbaden
Handwerk Metall:
Telefon [phone]
Telefax (06 11) 1 86 97 50
Wuppertal
Industriegebiet
Nächstebreck
Möddinghofe 21
42279 Wuppertal
Holz/Bau:
Telefon [phone]
Telefax (02 02) 6 47 71 25
Würzburg
Gewerbegebiet Ost
Sandäcker 11
97076 Würzburg
Telefon [phone]
Telefax (09 31) 2 79 89 18
Adolf Würth GmbH & Co. KG
Postfach
·
74650 Künzelsau
·
Telefon [phone]
·
Telefax (0 79 40) 15 10 00
Internet: http://www.wuerth.com · e-mail: [email protected]
701 135 BA 0103
- Printed in Germany - Imprimé en Allemagne MWV-OSW-01/03 • © by Adolf Würth & Co. KG • Nachdruck, auch auszugsweise, nur mit Genehmigung.
Würth-Niederl. hoch 01/06 Seite 2 Donnerstag, 12. Juli 2001 7:48 07