XCADEY SPEED AND CADENCE 2in1 SENSOR User manual

SPEED AND CADENCE 󾙔in󾙓 SENSOR
User Manual

Introduction
App
Downloading the XCADEY App
Search for 'XCADEY' in the App Store or Google Play, or scan the
QR code to download the app.
Led indicator Unlock indicator

2
󾙓. Open XCADEY App and connect with the sensor. Click the button "Switch to
Speed Mode". The sensor will finish switch after auto reboot. It will show blue led
when running in speed mode.
󾙔. Place and hold the speed sensor with the gasket on the wheel hub, attach the
rubber ring to the hook of the sensor, then pull it around the hub and attach it to
another hook. Make sure the sensor does not contact other parts of the bike.
󾙕. Turn up the wheel to make the speed sensor wake up. And search device on
your bike computer or phone.
Using in Speed mode
SPEED SENSOR
DEVICE
XCADEY-󾙔IN󾙓 󾙖󾙕󾙙󾙚

3
󾙓. Open XCADEY App and connect with the sensor. Click the button "Switch to
Cadence Mode". The sensor will finish switch after auto reboot. It will show red led
when running in speed mode.
󾙔. Choose the proper part of the crank arm on the non⼀drive side. Place and hold
the sensor on the inside of the crank arm. Pull the rubbering around the crankarm
and attach it to the hooks of the sensor.
󾙕. Turn up the crank to make the cadence sensor wake up. And search device on
your bike computer or phone.
Using in Cadence mode
CADENCE SENSOR
DEVICE
XCADEY-󾙔IN󾙓 󾙖󾙕󾙙󾙚