Xentino C540 User manual

[Type text]
Xentino Technologies Corp.
www.xentino.com
Product Overview
C540 is an Qualcomm Chipset high power industrial Ceiling Wireless
Access Point with the next generation 802.11ac Wi-Fi standard,
combined 1200Mbps Wi-Fi speed over 2.4GHz (300Mbps) and 5GHz
(900Mbps), support Wave2, equipped Gigabit WAN & LAN port, data
rate make more than 100 end users can access into C540 with faster
Ethernet, make them to enjoy seamless HD movies, streaming, online
gaming, wireless security and other bandwidth-intensive tasks, widely
be used in school, hospital, hotel, office, shipping mall..
C540
11ac 1200Mbps Wave2 Ceiling Wireless AP
Main Features
Comply with IEEE 802.11ac/b/g/n, dual band, 1200Mbps Data Rate
1x10/100/1000Mbps WAN Port, 1x10/100/1000Mbps LAN Port
1000mW high power, build in 5dBi MIMO antenna, stronger signal strength, more wireless coverage,
16M Flash, 128M DDR2 RAM, more user, more stable
Support active IEEE 802.3at 48V PoE standard
Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz)
Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP, Repeater, WISP operation mode
With function of build in firewall, IP filter, URL filter and MAC filter
Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better
application in different environment
Support DDNS, VPN pass through, Port forwarding and DMZ host
Support 64/128-bit WEP security, EAP, 128bit WPA (TKIP/AES) security

[Type text]
C540
11ac 1200Mbps Wave2 Ceiling Wireless AP
Xentino Technologies Corp.
www.xentino.com
High Power for more range and stable signal
Designed in two line Power Amplifier on PCB board, the power can be 26±2dBm high power, 4dBi
MIMO high gain antenna, together with Ceiling mount, greatly increase the wireless range and
supply the stable Wi-Fi signal for users.
Wave 2 Technology
With Wave 2 Technology, it adopt 256QAM modulation, support MU-MIMO (Multi-User Multiple-
Input Multiple-Output), 160MHz Frequency, greatly to improved the communication efficiency.
Power over Ethernet
C540 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost.
So it can be installed in areas where power outlets are not readily available, eliminating the mess of
altering existing network infrastructure.
Access Controller System & Cloud Management System
With Access Control System, easily access advanced network settings through PC, like AP status
monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore.
Then work with Cloud Management System, easy to do central and remote management,
advertisement and multiple captive portal authentication make this AP more professional in Wi-Fi
Projects.

[Type text]
Hardware
Chipset
Qualcomm QCA9563 + QCA9886 +QCA8334
Standard
802.11ac/b/g/n, MIMO technology
Memory
128MB DDR2 RAM
Flash
16MB
Interface
1 * 10/100 /1000Mbps RJ45 WAN Port
1 * 10/100 / 1000Mbps RJ45 LAN Port
1 * Reset button, press 15 seconds to revert to default setting
Antenna
Build in 4dBi MIMO Antenna
Power consumption
48V PoE<30W
Size
198mm*198mm X 28mm
Weight
0.5KG
RF Data
Frequency
2.4G:802.11b/g/n; 5GHz:802.11a/n/ac
2.4GHz, 5GHz
Country code
FCC, IC, ETSI, MKK, MKK1, MKK2, MKK3, NCC, RUSSIAN, CN
Modulation
OFDM = BPSK,QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
Throughput
1200Mbps
2.4GHz RF Power
802.11b
11M
24±2dBm
1M
26±2dBm
802.11g
54M
23±2dBm
6M
25±2dBm
802.11n HT20
MCS7
22±2dBm
MCS0
24±2dBm
802.11n HT40
MCS7
22±2dBm
MCS0
24±2dBm
5.8G RF Power
802.11a
54M
21±2dBm
6M
24±2dBm
802.11n HT20
MCS7
21±2dBm
MCS0
24±2dBm
802.11n HT40
MCS7
20±2dBm
MCS0
23±2dBm
802.11ac HT80
MCS9
19±2dBm
MCS0
22±2dBm
2.4G Receive
Sensitivity
802.11b
11M
-85dBm
1M
-94dBm
802.11g
54M
-72dBm
6M
-90dBm
802.11n HT20
MCS7
-70dBm
MCS0
-88dBm
802.11n HT40
MCS7
-68dBm
MCS0
-86dBm
5.8G Receive
Sensitivity
802.11a
54M
-72dBm
6M
-90dBm
802.11n HT20
MCS7
-70dBm
MCS0 .
-88dBm
802.11n HT40
MCS7
-68dBm
MCS0 .
-86dBm
802.11ac HT80
MCS9
-58dBm
MCS0 .
-85dBm
EVM
2.4G: 802.11b: ≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28 dB
5.8G: 802.11a: ≤-25dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB
PPM
±20ppm
Max Users
128+
Specifications
C540
11ac 1200Mbps Wave2 Ceiling Wireless AP
Xentino Technologies Corp.
www.xentino.com

[Type text]
Firmware Features
Operation mode
Wireless AP, Gateway, WISP, Wi-Fi Repeater
WAN Type
Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)
Wireless Security
64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
SSID
Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G)
Firewall
DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding
Protocols
IPv4
Others
Package Contents
1200Mbps Dual Band wireless access point
Ethernet Cable
Quick Installation Guide
Setting Accessory
System
Requirements
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7,
Windows 8, MAC OS, NetWare, UNIX or Linux
Environment
Operating Temperature: -30~55 ℃
Max Operating Temperature: -40~70 ℃
Storage Temperature: -40~70 ℃
Humidity: 5%~95% non-condensing
Management
Firmware GUI , Remote Management, WLAN Controller, Cloud
Management System
Xentino Technologies Corp.
www.xentino.com
Specifications
C540
11ac 1200Mbps Wave2 Ceiling Wireless AP