Xerox Phaser 6180MFP User manual

Phaser®6180MFP
www.xerox.com/office/6180MFPsupport
multifunction printer
FR
IT
DE
ES
PT
EN
Features Setup Guide
Guia de Configuração dos Recursos
Guía de configuración de funciones
Funktionsinstallationshandbuch
Guida all'installazione delle funzioni
Guide de configuration des fonctions

English .................................................................................................... EN-1
Français ................................................................................................. FR-16
Italiano ..................................................................................................... IT-33
Deutsch ................................................................................................. DE-50
Español ................................................................................................. ES-67
Português ............................................................................................... PT-84
Copyright © 2007 Xerox Corporation. All Rights Reserved. Unpublished rights reserved under the copyright laws of the
United States.
XEROX®, CentreWare®, Phaser®, and PrintingScout® are trademarks of Xerox Corporation in the United States and/or
other countries.
Adobe® and PostScript® are trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Apple®, Bonjour®, Macintosh®, and Mac OS® are trademarks of Apple Computer, Inc. in the United States and/or other
countries.
PCL® is a trademark of Hewlett-Packard Corporation in the United States and/or other countries.
Microsoft® and Windows® are trademarks of Microsoft Corporation in the United States and/or other countries.

Phaser® 6180MFP Multifunction Printer
EN - 1
Overview
Overview
The Features Setup Guide walks you through the steps necessary to
install and enable features on your Phaser 6180MFP Multifunction
Printer.
Use the Phaser 6180MFP Installation Guide to connect the printer to
your computer.
You can connect to your printer over an Ethernet (Network) or USB
connection. Scanner features vary according to your connection method.
Note: If you need help deciding whether to connect over Ethernet or
USB (or both), see Frequently Asked Questions on page 15.
This guide will help you to:
Install the Drivers and Utilities:
■Windows 2000 or later
■Macintosh 10.2 and higher
Enable Scan to Email, Scan to PC, and Scan to FTP Features:
■Setting up a shared folder
■Setting up an address for the scanner
■Setting up SMTP server information
■Setting up scanning to an FTP server
Enable Fax Features:
■Entering fax number and country code
■Creating individual fax addresses
■Creating and editing a fax group
For detailed user information for this printer, go to www.xerox.com/
office/6180MFPsupport.

Phaser® 6180MFP Multifunction Printer
EN - 2
Installing the Windows Printer Driver over Ethernet (Network)
Installing the Windows Printer Driver over
Ethernet (Network)
1. Ensure the printer is turned on and connected to your network.
2. Insert the Software and Documentation CD-ROM into your
computer’s CD-ROM drive. The installer starts automatically.
3. Click the Language button and select your language from the list.
4. Click Install Printer Driver.
5. Select I Agree if you accept the Xerox License Agreement.
6. Select your Phaser 6180MFP Multifunction Printer from the list
of available printers, and then click the Install button.
7. If your printer was not in the list, type the printer’s IP address
directly into the Enter Printer’s IP address field, and then click
the Install button.
8. Print a test page to verify the installation was successful.
Installing PrintingScout Software
1. Click Install Utilities.
2. Click Install PrintingScout, and then click Next.
3. Select your language, and then click Next.
4. When asked to continue, click Next.
5. Select I Accept if you accept the Xerox License Agreement, and
then click Next.
6. Choose the destination folder, and then click Next
7. Verify the folder installation path, and then click Next.
8. When the installer finishes, click Finish.
Continue with the section Setting Up the Printer Features Connecting
over Ethernet (Network) on page 5.

Phaser® 6180MFP Multifunction Printer
EN - 3
Installing the Windows Scan Driver over USB
Installing the Windows Scan Driver
over USB
1. Ensure the printer is turned on and connected to your computer.
2. Click Cancel for each of first two times you see the Found New
Hardware Wizard.
3. Insert the Software and Documentation CD-ROM into your
computer’s CD-ROM drive. The installer starts automatically.
4. Click Install Scan Driver (USB Only).
5. To continue, click Next.
6. Select I Accept if you accept the Xerox License Agreement, and
then click Next.
7. In the InstallShield Wizard Complete dialog box, click Finish.
The Found New Hardware Wizard dialog box opens.
8. When the wizard asks Can Windows connect to the Windows
Update to search for software, select No, not this time, and then
click Next.
9. Select Install the software automatically (Recommended), and
then click Next.
10. When the installation is complete, click Finish.
Continue with Installing the Printer Driver over USB if you are not
connected to the printer over Ethernet.
Installing the Printer Driver over a USB Only Connection
1. The Found New Hardware Wizard prompts you to install the
Printer Driver.
2. When asked if Windows can connect to the Windows Update to
search for software, select No, not this time, and then click Next.
3. Select Install from a list or specific location (Advanced), and
then click Next.
4. Check Include this location in the search, and then click the
Browse button.
5. Browse to the Software and Documentation CD-ROM.
6. Expand the folder labeled with your computer’s operating system
(32-bit or 64-bit), select your language folder, and then click the
OK button. Ask your administrator if you need the PCL version or
the PostScript version. Click Next.
7. When the installation is complete, click Finish.

Phaser® 6180MFP Multifunction Printer
EN - 4
Macintosh Network Installation
Installing the Address Book Editor and Express Scan
Manager (USB Only)
1. Click Install Utilities.
2. Click Install Fax/Scan Utilities, and then click Next.
3. Select your language, and then click Next.
4. When asked to continue, click Next.
5. Select I Accept if you accept the Xerox License Agreement, and
then click Next.
6. Choose the destination folder, and then click Next.
7. When the installation is complete, click Finish.
Note: If you have not already installed PrintingScout Software, see
Installing PrintingScout Software on page 2.
Continue with the section Setting Up the Printer Features Connecting
over USB on page 10.
Macintosh Network Installation
Insert the Software and Documentation CD-ROM. Run the
VISE installer to completion.
Macintosh OS X 10.2.x and 10.3.x (Bonjour/Rendezvous)
1. Open the Print Setup Utility.
2. To add your new printer, click Add.
3. Select Rendezvous from the drop-down menu.
4. Select the printer in the printer’s window.
5. Select Xerox from the list of manufacturers in the Printer Model
lower drop-down menu.
6. Select the Phaser 6180MFP from the list of available printers.
7. Click the Add button.
Macintosh OS X 10.4.x and Higher (Bonjour)
1. Open the Printer Setup Utility.
2. Click the Add button.
3. Click the Default Browser button.
4. Select the Bonjour connected printer.
5. Click the Add button.

Phaser® 6180MFP Multifunction Printer
EN - 5
Macintosh USB Installation
Macintosh USB Installation
Insert the Software and Documentation CD-ROM. Run the
VISE installer to completion. Select the components you wish to install.
Macintosh OS X 10.2.x and 10.3.x (Bonjour/Rendezvous)
1. Open the Printer Setup Utility.
2. Click the Add button.
3. Select USB from the drop-down menu.
4. Select the printer in the printer’s window.
5. Select Xerox from the list of manufacturers in the lower drop-down
menu.
6. Select the Phaser 6180MFP from the list of available printers.
7. Click the Add button.
Macintosh OS X 10.4.x and Higher (Bonjour)
1. Open the Printer Setup Utility.
2. Click the Add button.
3. Click the Default Browser button.
4. Select the Phaser 6180MFP from the list of available printers.
5. Click the Add button.
Setting Up the Printer Features Connecting
over Ethernet (Network)
The following section will help you:
■Set up a shared folder.
■Create an address for the scanner.
■Set up the SMTP Server.
■Create an email Address.
■Set up scanning to an FTP Server.
■Set up the fax.
■Add individual and group addresses to your Fax Address Book.
Step 1: Setting Up a Shared Folder
Windows: To share a folder on a Windows operating system:
1. Open a Windows Explorer window.
2. Right-click the folder you want to share, and then select
Properties.
3. Click the Sharing tab, and then click Share this folder.

Phaser® 6180MFP Multifunction Printer
EN - 6
Setting Up the Printer Features Connecting over Ethernet (Network)
4. Click the Permissions button.
5. Select the Everyone group, and verify that all permissions are
enabled (for Full control, Change, and Read).
6. Click OK. Write down your Share name; you will need it for
setting up other features later in the setup process.
7. Click OK again.
Macintosh: To share a folder in a Macintosh operating system:
1. From the dock, open System Preferences.
2. Click the Sharing icon.
3. Enable Windows Sharing.
4. Click the Accounts button, and then enable your account.
5. Follow the on-screen prompts for entering your password.
6. Click Done.
7. Click Show All, and then click the Network icon.
8. Write down your IP address; you will need it for setting up other
features later in the setup process.
9. Click Show All, and then click Accounts.
10. Write down your Short Name; you will need it for setting up other
features later in the setup process.
11. Close System Preferences.
12. From the dock, open your Public folder and create a new folder.
The scanner will place images in this folder.
13. In the Finder window, click the folder you just created.
14. On the File menu, click Get Info, and then Ownership &
Permissions.
15. Click Details to expand the window.
16. Set permissions for Group to have Read and Write access, and then
click Apply to enclosed items.
Step 2: Using CentreWare IS to Create an Address for the
Scanner
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field. You
will see the home page for the printer. For instructions on how to
obtain the Printer IP address, see Frequently Asked Questions on
page 15.
3. On the printer’s home page, click Address Book.
4. On the Address Book tab, under Server Address Book on the left
navigation panel, click Individual Directory.

Phaser® 6180MFP Multifunction Printer
EN - 7
Setting Up the Printer Features Connecting over Ethernet (Network)
5. In the Directory Listing, click the Add button for any unused
address.
6. Fill in the information for your computer:
a. In the Name field, enter the name that you want to appear in
the Address Book.
b. Select SMB on the Server Type drop-down list.
c. In the Server Address field, enter the IP address of your
computer.
Windows: To get the IP address of your computer, open a DOS
Command Prompt window, type ipconfig, and then press the
Enter key.
Macintosh: To get the IP address of your computer, open
System Preferences and click on Network.
d. If the server is not using the default port, enter a Port Number.
e. In the login fields, enter the name and password that you use to
log in.
f. Windows: In the Share Name field, type the share name of the
folder that you shared previously.
Macintosh: In the Share Name field, type your short name.
g. Windows: The Server Path field is used to specify subfolders
of your shared folder. For example, if you have a shared Scans
folder that has a ColorScans subfolder. Enter \ColorScans in
the Server Path field.
Macintosh: In the Server Path field, type Public\foldername
where foldername is the folder that you created earlier.
7. Click the Save Changes button to create the new address.
Step 3: Setting Up the SMTP Server
To use the Scan to Email feature, you first need to set up your SMTP
server information. SMTP (Simple Mail Transfer Protocol) is a protocol
for sending email.
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field. You
will see the printer’s home page. For instructions on how to obtain
the Printer IP address, see Frequently Asked Questions on page 15.
3. From the printer’s home page, click Properties, and select SNMP
from the Protocols list.
4. Select the Enable SNMP check box, and then click Save Changes.
5. Select Email Server from the Protocols list.
6. Enter your email settings, and then click Save Changes.

Phaser® 6180MFP Multifunction Printer
EN - 8
Setting Up the Printer Features Connecting over Ethernet (Network)
Note: See your system administrator to obtain your email settings if
necessary.
Step 4: Using CentreWare IS to Create an Email Address
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field. You
will see the printer’s home page. For instructions on how to obtain
the Printer IP address, see Frequently Asked Questions on page 15.
3. Double-click the Email icon to open an Email Address dialog box.
4. If you want to change the automatically assigned address ID, click
the Specify an Address Number check box, and then enter a value
from 1 to 100 for the Address ID.
5. In the Name field, enter the recipient's name.
6. In the Email Address field, enter the recipient's email address.
7. Click the OK button. The email address is added to the printer
email address book.
Note: Email addresses in the address book appear on the printer when
information is updated in the Address Book Editor menu or toolbar.
Step 5: Using CentreWare IS to Set Up for Scanning to an
FTP Server
To create an address for the scanner using CentreWare IS:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field. You
will see the printer’s home page. For instructions on how to obtain
the Printer IP address, see Frequently Asked Questions on page 15.
3. Click Address Book.
4. Under Server Address Book, click Individual Directory.
5. In the Directory Listing, click the Add button of any blank
address.
a. In the Name field, enter the name that you want to appear in
the Address Book.
b. In the Server Address field, enter the IP address of the FTP
server.
c. If the FTP server is not using the default port, enter a Port
Number.
d. Leave the Share Name and Server Path fields blank.
6. Click the Save Changes button to create the new address.

Phaser® 6180MFP Multifunction Printer
EN - 9
Setting Up the Printer Features Connecting over Ethernet (Network)
Step 6: Setting Up the Fax
1. Verify that the fax phone line is connected.
2. From the control panel:
a. Press the System button.
b. Select the Admin Menu.
c. Select the Fax Settings.
d. Select your country.
e. Enter your fax number (this number prints on the header of the
faxes).
You can now use the following steps to enter addresses using
CentreWare IS.
Step 7: Using CentreWare IS to Add Individual and Group
Addresses to Your Fax
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field. You
will see the printer’s home page. For instructions on how to obtain
the Printer IP address, see Frequently Asked Questions on page 15.
3. From the printer’s home page, click Address Book.
4. In the Address Book, under Fax Phone Book, click Individual
Directory.
5. In the Directory Listing, click the Add button of any entry that is
not in use. The first ten entries in the Address Book correspond to
the ten one touch buttons found on the left navigation panel of the
control panel.
6. Enter the information for the individual.
7. Click the Save Changes button to create the new address. The new
individual is saved to the printer’s address book.

Phaser® 6180MFP Multifunction Printer
EN - 10
Setting Up the Printer Features Connecting over USB
Step 8: Using Centreware IS to Create and Edit a Fax Group
To create a fax group through CentreWare IS:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field. You
will see the printer’s home page. For instructions on how to obtain
the Printer IP address, see Frequently Asked Questions on page 15.
3. Click the Address Book.
4. In the Address Book, under Fax Phone Book, click Group
Directory.
5. In the Directory Listing, click the Add button of any group that is
not in use.
6. Enter a group name, and then click the Save Changes button.
7. Click the Return button when you receive a “Request
Acknowledged” message.
8. Click the Edit button for the group you created.
9. Select the check box of individuals that you want to add to the
group.
10. Click Save Changes.
Setting Up the Printer Features Connecting
over USB
If you connect your system to the Printer through the Universal Serial
Bus (USB), this section will help you:
■Use the Address Editor to create an address for your computer.
■Use the Express Scan Manager to setup USB scanning.
■Set up the fax.
■Add an individual to your fax addresses.
■Create and edit a fax group.
Step 1: Using the Address Book Editor to Create an Address
(Windows)
Note: If your computer is connected to the printer through USB only,
you do not need to do the steps in this section.
To create an address to a folder on your computer where your printer
can scan images directly:
1. On the Start menu, select All Programs/Xerox/Phaser6180MFP/
Address Book Editor, and then click OK.

Phaser® 6180MFP Multifunction Printer
EN - 11
Setting Up the Printer Features Connecting over USB
2. Double-click on the Server icon to open the Server Address dialog
box.
3. If you want to change the automatically assigned address ID, click
the Specify an Address Number check box, and then enter a value
from 1 to 32 for the Address ID.
4. In the Name field, enter the name you want this address to appear
under in the Address Book.
5. Select the Computer (SMB) option.
6. Click the Computer Settings wizard button.
7. Enter the folder where you want to scan in the Save In Folder field,
or click the Browse button to locate an existing folder. Selecting an
existing folder from the Browse button will automatically populate
the Shared Folder and Share Name fields when Use a network
shared folder as the Save In folder and Auto Share are checked.
8. Click OK to select the appropriate folder.
9. Click Next. The Computer Folder User Settings dialog box
opens.
10. Enter the name and password that you log in with.
11. Select the Use Scan Service User check box to allow user access
only to the shared directory they create.
12. Click Next.
13. Click Finish to confirm the new settings. The Computer Settings
wizard closes. The Server Address dialog box will automatically
populate with the information you just set.
14. Enter the Path for forwarding scans.
15. Clear the Use Default Port Number check box to enter the Port
Number used by Server Type. The default values are:
■SMB: 139
■FTP: 21
16. Click OK.
The Address Book is saved with the new entry for your computer.
You are now ready to scan images to the network computer.
Note: For more information about the Address Book Editor, click the
Help button while in the editor.

Phaser® 6180MFP Multifunction Printer
EN - 12
Setting Up the Printer Features Connecting over USB
Alternate Step 1: Using the Address Book Editor to Create
an Address (Macintosh)
Note: If your computer is connected to the printer through USB only,
you do not need to do the steps in this section.
To create an address to a folder on your computer where your printer
can scan images directly:
1. Open the Applications folder, and then select Xerox/
Phaser6180MFP/Address Book Editor.
2. In the left navigation panel of the Address Book Editor, double-
click the Server icon and then select New. The Server Address
dialog box opens.
3. In the Name field of the Server Address dialog box, enter the
name that you want this address to appear under in the Address
Book.
4. Click the Computer (SMB) option button.
5. Type your IP address in the Server Name / IP Address field.
6. Type your short name in Share Name field.
7. Type the name and password that you log in with in the Login
fields.
8. Type your password in the Confirm Login Password field.
9. If you are using the default port number, select the Use Default
Port Number check box. If you are not using the default port
number, type the port number in the Port Number field.
10. Confirm the settings, and then click OK.
11. On the File menu, select Save.
The address book is saved with the new entry for your computer and you
are now ready to scan images to the network computer.
Step 2: Using the Express Scan Manager to Set Up USB
Scanning
Note: The express Scan Manager Software must be installed.
1. Windows: On the Start menu, select All Programs/Xerox/
Phaser 6180MFP/Express Scan Manager. Then click OK.
Macintosh: From the Application folder, click Xerox/
Phaser 6180MFP, and then double-click Express Scan Manager.
2. Click Browse and locate the Output Destination folder.
3. Click OK.

Phaser® 6180MFP Multifunction Printer
EN - 13
Setting Up the Printer Features Connecting over USB
Step 3: Setting Up the Fax
1. Verify that your fax phone line is connected.
2. From the control panel:
a. Press the System button.
b. Select the Admin Menu.
c. Select the Fax Settings.
d. Select your country.
e. Enter your fax number (this number prints on the header of the
faxes).
Step 4: Using the Address Book Editor to Add an Individual
to Your Fax Addresses
1. Windows: On the Start menu, select All Programs/Xerox/
Phaser 6180MFP/Address Book Editor, and then click OK.
Macintosh: From the Application folder, click Xerox/
Phaser 6180MFP, and then double-click Address Book Editor.
2. In the left navigation panel, right-click the Fax icon and then select
New and New Entry. The Speed Dial dialog box opens. The
Address Book Editor automatically assigns the speed dial number
to the first empty entry.
3. To manually specify the speed dial number, click Specify an
Address Number, and then enter a value from 1 to 200 for the
speed dial number. The first ten entries in the Address Book
correspond to the ten one-touch buttons found on the left navigation
panel of the control panel.
4. Type in a value for Name and Phone Number.
5. To add this entry to an existing group:
a. Click Group Membership.
b. Select the group(s) to add this entry to, and then click OK.
6. Confirm the group members, and click OK.
7. Click OK.
8. Windows: On the File menu, select Save all.
Macintosh: On the File menu, select Save.
The address book is saved with the new fax entry.

Phaser® 6180MFP Multifunction Printer
EN - 14
Setting Up the Printer Features Connecting over USB
Step 5: Using the Address Book Editor to Create a Fax
Group
To create a group using the Address Book Editor:
1. Windows: On the Start menu, select All Programs/Xerox/
Phaser 6180MFP/Address Book Editor, and then click OK.
Macintosh: From the Application folder, click Xerox/
Phaser 6180MFP, and then double-click Address Book Editor.
2. In the left navigation panel, right-click the Fax icon and then select
New and New Group. The Group Dial dialog box opens. The
Address Book Editor automatically assigns the Group ID to the
first available entry.
3. To manually specify the Group ID, click Specify an Address
Number, and then type a value from 1 to 200.
4. Click the Group Membership button.
5. Select group members from the list on the left navigation panel of
the screen, and then click the Add button to add them to the group.
To select multiple group members, press and hold the Ctrl key
while making selections.
6. Click OK when you have finished adding group members.
7. Click OK a second time to create the group.
8. Confirm the group members, and then click OK.
9. Windows: On the File menu, select Save all.
Macintosh: On the File menu, select Save.
To edit Group entries with the Address Book Editor:
1. From the Start menu, open the Address Book Editor.
2. In the left navigation panel, click the Fax icon.
3. On the upper right navigation panel, right-click the group you want
to edit and then select Edit.
4. Click the Group Membership button.
5. Use the Add and Delete buttons to edit the group.
6. Press the OK button.
7. Press the OK button again.
8. Confirm the group members, and then click OK.
9. Windows: On the File menu, select Save all.
Macintosh: On the File menu, select Save.

Phaser® 6180MFP Multifunction Printer
EN - 15
Frequently Asked Questions
Frequently Asked Questions
Why would you use a network connection?
When connecting your printer to the computer over the Ethernet
(Network) you can:
■Scan to a computer on the network using shared folders.
■Scan to an FTP server.
■Scan to email.
■Use CentreWare IS to create address book entries.
Why would you use a USB connection?
When connecting your printer to the computer over the Universal Serial
Bus (USB), you can:
■Scan an image into an application using the scan drivers.
■Scan an image to a folder using Express Scan manager.
■Use the Address Book Editor to create address book entries.
How do you find your computer’s IP address?
For Windows:
From a DOS prompt on Windows, enter the following:
ipconfig
You will see a listing of the IP Address for your computer.
For a Macintosh:
1. From the dock, open System Preferences.
2. Click the Network icon.
You will see a listing of the IP Address for your computer.
How do you find your printer’s IP address?
From your printer control panel:
1. Press the System button.
2. Use the Up Arrow and Down Arrow to scroll down to
Information Pages and press OK.
3. Scroll down to Configuration and press OK. Your configuration
page will automatically print.
You will see a listing for your printer's IP address in the Network
Settings section of the Configuration page.

Imprimante multifonctions Phaser® 6180MFP
FR - 16
Présentation
Présentation
Le présent Guide de configuration des fonctions vous guide à travers les
différentes étapes d'installation et d'activation des fonctions sur
l'imprimante multifonction Phaser 6180MFP.
Pour connecter l'imprimante à votre poste de travail, reportez-vous au
Guide d'installation de la Phaser 6180MFP.
Vous pouvez connecter votre imprimante via une connexion Ethernet
(réseau) ou USB. Les fonctions de numérisation peuvent varier selon la
méthode de connexion utilisée.
Remarque : Pour vous aider à déterminer le protocole de connexion à
utiliser, Ethernet ou USB (voire les deux), reportez-vous à la section
Foire aux questions à la page 31.
Ce guide vous aidera à effectuer les opérations suivantes :
Installer les pilotes et les utilitaires :
■Windows 2000 ou versions ultérieures
■Macintosh 10.2 et versions ultérieures
Activer les fonctions de numérisation vers courriel, vers PC et vers
réseau (FTP) :
■Configuration d'un dossier partagé
■Configuration d'une adresse pour le scanner
■Configuration des informations du serveur SMTP
■Configuration de la numérisation vers un serveur FTP
Activer les fonctions de fax :
■Saisie d'un numéro de fax et d'un code pays
■Création d'adresses fax individuelles
■Création et modification d'un groupe de télécopie
Pour obtenir des informations détaillées sur cette imprimante,
rendez-vous sur le site www.xerox.com/office/6180MFPsupport.

Imprimante multifonctions Phaser® 6180MFP
FR - 17
Installation du pilote d'imprimante Windows sur Ethernet (réseau)
Installation du pilote d'imprimante
Windows sur Ethernet (réseau)
1. Vérifiez que l'imprimante est sous tension et connectée au réseau.
2. Insérez le Software and Documentation CD-ROM (CD-ROM
Logiciels et documentation) dans le lecteur de l'ordinateur.
Le programme d'installation est lancé automatiquement.
3. Cliquez sur le bouton Langue et sélectionnez votre langue dans
la liste.
4. Choisissez Installer le pilote de l'imprimante.
5. Cliquez sur J'accepte pour accepter le contrat de licence du
logiciel Xerox.
6. Sélectionnez l'imprimante multifonction Phaser 6180MFP dans
la liste des imprimantes détectées et cliquez sur le bouton Installer.
7. Si votre imprimante n'est pas répertoriée dans la liste, saisissez son
adresse IP directement dans le champ Entrez l'adresse (ou les
adresses) IP de l'imprimante, puis cliquez sur Installer.
8. Imprimez une page test pour vérifier que l'installation a réussi.
Installation du logiciel PrintingScout
1. Cliquez sur Installer les utilitaires.
2. Cliquez sur Installer PrintingScout, puis cliquez sur Suivant.
3. Sélectionnez votre langue, puis cliquez sur Suivant.
4. Pour continuer, cliquez sur Suivant.
5. Cliquez sur J'accepte pour accepter le contrat de licence du logiciel
Xerox, puis cliquez sur Suivant.
6. Choisissez le dossier de destination, puis cliquez sur Suivant.
7. Vérifiez le chemin d'installation du dossier, puis cliquez
sur Suivant.
8. Une fois l'installation terminée, cliquez sur Terminer.
Passez à la section Configuration des caractéristiques de l'imprimante
connectée via Ethernet (réseau) à la page 21.

Imprimante multifonctions Phaser® 6180MFP
FR - 18
Installation du pilote de numérisation Windows sur USB
Installation du pilote de numérisation
Windows sur USB
1. Vérifiez que l'imprimante est sous tension et connectée au poste
de travail.
2. Cliquez sur Annuler dans chacune des fenêtres Assistant
Matériel détecté.
3. Insérez le Software and Documentation CD-ROM (CD-ROM
Logiciels et documentation) dans le lecteur de l'ordinateur.
Le programme d'installation est lancé automatiquement.
4. Choisissez Installer le pilote de numérisation
(USB uniquement).
5. Pour continuer, cliquez sur Suivant.
6. Cliquez sur J'accepte pour accepter le contrat de licence du logiciel
Xerox, puis cliquez sur Suivant.
7. Dans la boîte de dialogue Fin de l'Assistant InstallShield,
cliquez sur Terminer. La boîte de dialogue Assistant Matériel
détecté s'affiche.
8. À la question Autorisez-vous Windows à se connecter à
Windows Update pour rechercher les mises à jour ?,
sélectionnez Non, par pour cette fois, puis cliquez sur Suivant.
9. Sélectionnez Installer le logiciel automatiquement
(recommandé), puis cliquez sur Suivant.
10. Au terme de l'installation, cliquez sur Terminer.
Poursuivez l'installation du pilote d'imprimante sur USB si vous n'êtes
pas connecté à l'imprimante via Ethernet.
Installation du pilote d'imprimante sur une connexion
USB uniquement
1. La boîte de dialogue Assistant Matériel détecté vous invite à
installer le pilote d'imprimante.
2. À la question Autorisez-vous Windows à se connecter à
Windows Update pour rechercher les mises à jour ?,
sélectionnez Non, par pour cette fois, puis cliquez sur Suivant.
3. Sélectionnez Installer à partir d'une liste ou d'un emplacement
spécifié (utilisateurs expérimentés), puis cliquez sur Suivant.
4. Cochez la case Inclure cet emplacement dans la recherche,
puis cliquez sur Parcourir.
5. Accédez au Software and Documentation CD-ROM (CD-ROM
Logiciels et documentation).