Xerox Xerox Phaser 6600 User manual

haser® 6600 and
WorkCentre® 6605
Service Manual
haser ® 6600 and WorkCentre® 6605
Service Manual
Xerox Internal-Use Only
Updated 10/14/15 DAW

Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
5-1
5
Parts Lists
In this chapter...
• Serial Number Location and Range
• Using the Parts List
• Parts Navigation: Phaser 6600
• Parts Navigation: WorkCentre 6605
• Parts Lists
• Xerox Supplies and Accessories

Parts Lists
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
5-2
Serial Number Location and Range
Changes to Xerox products are made to accommodate improved components. When ordering parts
include this information:
• Component's part number
• Product type or model number
• Serial Number of the printer
The serial number label is located on the rear of the printer as shown.

Parts Lists
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
5-3
Using the Parts List
• Most of the parts lists for the MFP and SFP are common. The lists that are not common include
the product name in the title. For example, Parts List 1.1 for the SFP is titled Phaser 6600 UI
(Control Panel); Parts List 1.1 for the MFP is titled WorkCentre 6605 UI (Control Panel).
•ID No.: The callout number from the exploded part diagram.
•Name/Description: The name of the part to be ordered and the number of parts supplied per
order.
•Part Number: The material part number used to order that specific part.
• Parts identified throughout this manual are referenced PL#.#.#; For example, PL3.1.10 means the
part is item 10 of Parts List 3.1.
• A Black triangle preceding a number followed by a parenthetical statement in an illustrated parts
list means the item is a parent assembly, made up of the individual parts called out in
parentheses.
• The notation “with X~Y” following a part name indicates an assembly that is made up of
components X through Y. For example, “1 (with 2~4)” means part 1 consists of part 2, part 3, and
part 4.
• The notation “J1<>J2 and P2” is attached to a wire harness. It indicates that connector Jack 1 is
attached to one end of the wire harness and connector J2 is attached to the other end that is
plugged into P2.
• Only parts with part numbers are available for ordering. Parts without part numbers are available
on the parent assembly.

Parts Lists
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
5-4
Parts Navigation: Phaser 6600
6600-028
Front
PL1.1
PL13.1
PL15.1
PL13.3
PL9.1
PL19.1
PL15.2
PL14.1
PL19.1
PL13.2
PL6.1
6600-029
Front
PL4.1
PL4.1
PL4.1
PL8.1
PL5.1

Parts Lists
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
5-5
6600-030
Front
PL2.1
PL3.1
PL8.1
PL7.1
PL17.1
PL17.1
PL3.1
6600-031
Front
PL18.1
PL18.1

Parts Lists
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
5-6
6600-032
Front
PL10.3
PL10.2
PL10.1

Parts Lists
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
5-7
Parts Navigation: WorkCentre 6605
6600-023
Front
PL1.1
PL13.1
PL15.1
PL13.3
PL9.1
PL19.1
PL15.2
PL14.1
PL51.1
PL13.2
PL6.1

Parts Lists
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
5-8
6600-024
Front
PL4.1
PL4.1 PL4.1
PL8.1
PL5.1
6600-025
Front
PL2.1
PL3.1
PL8.1
PL7.1
PL17.1
PL17.1
PL3.1

Parts Lists
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
5-9
6600-026
PL18.1
PL19.1
PL18.1
Front