Xerox Phaser 6115 User manual

Xerox Document Services Platform
DocuTech/DocuPrint 2000 Series printers
Getting
started
701P38849
October 2002
DocuSP version 3.6.xx

Prepared by:
Xerox Corporation
Global Knowledge and Language Services
800 Philips Road Bldg. 845-17S
Webster, New York 14580
USA
©2002 by Xerox Corporation. All rights reserved.
Copyright protection claimed includes all forms and matters of copyrightable material and information
now allowed by statutory judicial law or hereinafter granted, including without limitation, material generated
from the software programs which are displayed on the screen such as icons, screen displays, looks, etc.
Printed in the United States of America.
XEROX® and all Xerox product names mentioned in this publication are trademarks of XEROX CORPORATION.
Other company trademarks are also acknowledged.
Changes are periodically made to this document. Changes, technical inaccuracies, and
typographic errors will be corrected in subsequent editions.

Table of contents
Table of contents ......................................................................................................................................................1
1. DocuSP 3.6.xx ............................................................................................................................... 1-1
New features.................................................................................................................................. 1-1
Minimum hardware requirements for DocuSP 3.6.x ................................... 1-5
Documentation............................................................................................................................... 1-6
2. DocuSP 3.6.x software release information ............................................................................... 2-1
Notes and caveats ......................................................................................................................... 2-1
DocuSP Controller ...................................................................................... 2-1
Security ....................................................................................................... 2-9
DocuJob Converter ..................................................................................... 2-9
VIPP Interpreter .......................................................................................... 2-9
DigiPath....................................................................................................... 2-9
Clients ......................................................................................................... 2-9
3. Resource Backup and Restore (RBR) utility.............................................................................. 3-1
Procedure for backing up and restoring resources ..................................... 3-2
Helpful hints for using RBR ......................................................................... 3-2
Sample resource backup and restore scripts ............................................. 3-3
4. Adobe Acrobat Reader ................................................................................................................. 4-1
For Windows and Macintosh....................................................................... 4-1
For Solaris................................................................................................... 4-1

XEROX DOCUMENT SERVICES PLATFORM SERIES 1-1
GETTING STARTED
1. DocuSP 3.6.xx
Your Document Services Platform (DocuSP) product has just
been installed or upgraded. This document will familiarize you
with the new features and functions available with this system.
New features
The following is a list of the features and functions now available
in the DocuSP Version 3.6.xx software. For customers
upgrading from an earlier version, this list details the
enhancements available to you in this version of the software.
The following new features are available for all DocuTech 2000
Series and DocuPrint 2000 Series printers including:
ÞDocuTech 6100, 6115, 6135, 6155, 6180
ÞDocuPrint 1xx EPS
ÞDocuTech 75, 90 and DocuPrint 75, 90
For detailed information on each of these new features, refer to
the DocuSP Help system or contact your Xerox customer trainer.
vThe ability to forward a job from one DocuSP system to a
second DocuSP system. Job Forwarding allows the Trusted
User to select any job from the Job Manager and forward it
to another DocuSP 3.1 or 3.6 system.
vThe ability to pause a job and reposition the page currently
printing to either an earlier or later page. For example, a job
with 2,000 unique pages may be paused at page 999 and
restarted printing at page 998 or 1001. Reposition output is
also known as Space Pages or Spacing.
vThe ability to impose images in multiple combinations on a
single sheet of paper to support book printing. The Layout
feature is available on the Job and Queue Properties, and
provides a variety of image placement, rotation, and scaling
to support a variety of imposition models.
vLayout is only available for PostScript and PDF jobs.
vAll page-level programming in the PostScript or PDF and
special pages programming is ignored during the
conversion.
vThe Layout feature, also called imposition, requires a
license to be enabled and will be available later this year.
Contact your Xerox representative for more information.

DOCUSP 3.6.xx
1-2 XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
vSupport for Adobe Acrobat 5.0 and PDF version 1.4, which
primarily provides support for printing transparent image
data. Additional information may be obtained from the
Adobe PDF Reference Manual Version 3 by Adobe
Systems.
vAccounting enhancements:
vAn option is now available to allow the automatic export
and purge of the accounting log when the log reaches
80% full.
vAdditional options have been added to allow the
accounting log to be exported in an industry standard
delimited database file format. The format option saves
the accounting log in a fixed semi-colon format that is
standard for popular database software.
vThe Account field name in the exported accounting log
has been changed to Department to support legacy LPS
systems.
vAdditional accounting log file formats have been added
to support color versions of the DocuSP. These new
formats, 5.0 and 5.1, are not applicable to the DocuTech
and DocuPrint systems.
vSave facility:
vIf the specified save path requested by the job being
saved does not exist, the Save Facility software now
automatically creates the path and saves the job in the
new location.
vSingle or multiple TIFF page creation is now selectable.
vStock Management:
vThe Preferences tab for Stocks and Trays has been
expanded with additional options to allow the stock
management feature to be configured for each printer
type and market, and to allow customers to configure
the stock management for their workflow requirements.
vView Columns allows the customer to set which
paper tray options are displayed in the Printer
Manager.
vAllow Multiple Stocks per Paper Tray enables or
disables the ability to use the “Append” feature on a
tray.
vDisplay Preferred Trays allows a preferred tray
designation per a paper stock. This is especially
useful for paper stocks that require a particular type
of feed tray, for example using a vacuum feed tray
for a carbonless stock, or feed orientation.
vAllow Tray Selection by Queue enables or disables
the ability for the customer to force a queue to feed

DOCUSP 3.6.xx
XEROX DOCUMENT SERVICES PLATFORM SERIES 1-3
GETTING STARTED
the stock from a specific tray regardless of the paper
stock attributes of the stock in the tray.
vEnforce Unique Names forces the customer to
create new names for a new stock. Some printing
environments, especially the color printers, prefer to
be able to use duplicate stock names for stock
grouping and characterization.
vAllow Duplicate Names allows the user to create
multiple stocks with the same or similar name. In
the creation of the duplicate name, the customer
can select to automatically generate the name
extension, thus adding a !1, !2 to the duplicate stock
name, or manually generate the name extension
allowing the customer to determine the extension.
vUnspecified stock behavior has been more clearly
defined for each printer type.
vQueue Manager:
vThe Queue Manager provides a new option to allow the
customer to feed stock from a specific tray as an
alternative to specifying the paper stock by stock
parameters. This option performs an override to the job
properties for paper stock for all job pages and
administration pages.
vThe outQ size limit has been extended to scale with the size
of the internal hard drive of the DocuSP controller. This
allows for a very large outQ, which will allow processing of
very large jobs.
vThe size of the banner page message field has been
expanded.
vThe pages to print range has been expanded to 999,999.
vThe maximum total number of exception pages, covers, and
inserts has been set at 1000 per job.
vSNMP enhancements:
vMore complete SNMP support is now available,
including many of the printer engine level features can
now be communicated to the SNMP managers. The
exact list of available features is dependent upon the
match between the SNMP manager and the DocuSP
functions.
vThe SNMP gateway now requires a license to be
enabled on the DocuSP controller.
vThe SNMP gateway can be switched on or off by the
System Administrator or Trusted User in the Gateways,
SNMP setup tab. This switch allows the gateway to be
disabled as necessary for security reasons.

DOCUSP 3.6.xx
1-4 XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
vThe DocuSP user interface font size adjustment is now
available in the DocuSP user interface under the Setup pull-
down menu. In DocuSP 3.1, the font size adjustment could
only be made through a UNIX command line tool.
vConfiguration:
vThe system information and configuration windows have
been enhanced with additional information. For
example, the General tab now includes specific details
about the processor speed of the DocuSP controller,
and hard disk sizes and types.
vAn icon will now be displayed on the main menu that
indicates debug logging has been enabled or disabled for
troubleshooting purposes.
vThe Job Status message has been updated to include a
percentage complete value. The percentage complete is
based on the total number of pages printed in relation to the
number of pages ripped and the quantity of prints. The
percentage displayed changes as the job is ripped and
printed, so very large jobs may display unexpected
percentages based on how much of the job has been ripped.
vImprovements have been made to the Job Status Message
area in Job Properties. The raw byte count is now reported
in Mbytes, and the field for pages printed now reads “Sheets
Delivered”.
vThe ability to set the Socket Gateway to receive LCDS data
streams from VPS clients can now be set through the
DocuSP Gateways dialog. Prior to this release, the VPS
setup had to be accomplished via a UNIX command.
vThe Reprint Manager module has been moved from the Job
Manager to a separate module, and the Reprint Manager
icon now displays on the module tool bar on the left side of
the user interface.
vEnhanced security for DocuSP and the UNIX environment.
For specific information, refer to the System Guide.
vAdditional tape formats are now supported by the Tape
Client.
vICL 2900
vHoneywell Bull
vImplementation of the LCDS workflow for the DocuTech and
DocuPrint 75/90 printers. The majority of the LCDS
workflow that has been available with the DocuPrint 1xx EPS
systems is now available on the 75/90 systems.
vAddition of the On-line Gateway interface and Groupe
Set board.
vAddition of the LCDS decomposer to process LCDS
jobs.

DOCUSP 3.6.xx
XEROX DOCUMENT SERVICES PLATFORM SERIES 1-5
GETTING STARTED
vJob, Queue, and Resource management features to
support LCDS jobs are the same as on the DocuPrint
1xx EPS systems.
vOff-line tape submission using the Tape Client interface.
vCertain limitations exist on the LCDS implementation
based on differences between the DocuPrint 1xx and
DocuTech/DocuPrint 75/90 printers. Refer to your
Xerox representative for more information.
vSupport for 16 digit job numbers for LCDS jobs.
vThe ability to set the DocuSP to automatically end a current
on-line job and start a new on-line job without operator
intervention.
vRefer to the Customer Letter for the Xerox Production Print
Services software version 3.6.xx for information on new
features and options available in the client drivers and Xerox
Document Submission tools.
Minimum hardware requirements for DocuSP 3.6.x
The DocuSP 3.6.x platform hardware requirements vary by
printer type and software options, such as LCDS, required by the
customer. Refer to the specific product documentation for the
platform requirements for each printer product.

DOCUSP 3.6.xx
1-6 XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
Documentation
The documentation set to support the DocuTech 2000 Series
Models 61xx, 75, 90 and the DocuPrint 2000 Series Models 1xx
EPS, 75, and 90 is included on a CD ROM packaged with this
Getting Started document. The documentation is provided in
Adobe Acrobat pdf format for easy printing and for display on
your workstation.
The CD ROM is structured into collections of documentation:
·DocuSP 3_6: contains the system level documentation to
support the DocuSP controller.
·DP_EPS: contains the documentation that supports the
DocuPrint 1xx EPS products in addition to the system level
documentation.
·DT_61xx: contains the documentation that supported the
DocuTech 61xx products in addition to the system level
documentation.
·DTDP7590: contains the documentation that supported the
DocuTech/DocuPrint 75/90 products in addition to the
system level documentation.
·DC_6060: contains the documentation that supported the
DocuColor 6060 products in addition to the system level
documentation.
·Acroread: contains the executable files to load the Adobe
Acrobat Reader. Refer to the last section in this document
for instructions on loading the reader.

XEROX DOCUMENT SERVICES PLATFORM SERIES 2-1
GETTING STARTED
2. DocuSP 3.6.x software release
information
The following information supports the DocuSP 3.6.x software.
Please read the information thoroughly before using the system.
Notes and caveats
The following sections cover known notes and caveats for the
DocuSP 3.6.x software and supporting applications.
DocuSP Controller
The following table details the notes and caveats for the DocuSP
3.6.x software and indicates which printer products, or all, to
which the caveat is applicable.
Caveat Applicable printer product
When using the Socket Gateway to submit
LCDS jobs, the jobs may contain missing
pages or data, extra pages or data, the job
may abort, or a C03-308 error may occur.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
The Accounting Report for an LCDS On-line
job contains “Host Job Number = None” on
the middle reports for a multiple report job.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
In the LCDS Resource Manager, when an
IMG file is sampled and the Positioning
window is open, the IMG file does not print
correctly if the units are millimeters, 600 dpi,
or 300 dpi. Ensure that the units are set to
inches.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
If a custom paper size is programmed in the
Queue Manager to be Short Edge feed, LCDS
jobs raise a message “Edge marking values
are out of range”. If necessary, program the
custom paper size as a Long Edge Feed.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
If an LCDS job is waiting with an OTEXT
WAIT command, the fault clearance window
to resume printing does not display. The
operator has to resume the job.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS

DOCUSP 3.6.xx
2-2 XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
Caveat Applicable printer product
When a copy sensitive FORM command
causes a change to the back side, side 2, of a
page, the form does not print on side 2 but
prints on side 1 of the next page.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
A DJDE syntax error is raised when a DJDE
command RTEXT=(TEST) is used, where
TEST is the name of a TST file.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
If an LCDS job is submitted after a DocuSP
restart, a fault clearance message may
appear. Clear the fault and the system prints
correctly.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
A large number (e.g. 100+) of jobs submitted
with the printer paused causes the printer to
cycle down intermittently after the printer
resumes printing. Single page printing
performance is very slow. Do not submit a
large number of single page jobs while the
printer is paused.
DocuTech/DocuPrint 90
After changing the output order or output
delivery of a printing job, and then selecting
Apply Properties Now, the system hangs.
Restart the system, then delete and resend
the job.
DocuTech/DocuPrint 75/90
Do not attempt to program a paper tray that
contains ordered stock and is currently being
used by a printing job.
DocuTech/DocuPrint 75/90
After a restart of the DocuSP software, the
Queue Manager, Printer Manager,
Administration, Job Manager, and Reprint
Manager windows may take up to 5 minutes to
come up. As a workaround, exit power saver
mode before restarting the system, or power
on power off the printer during the restart.
DocuTech/DocuPrint 75/90
Any job with a paper size US Legal or US
Letter short edge feed and single portrait
stitching becomes ineligible with the message
“Job was received with a programming
conflict. Finishing is not available for jobs with
this media orientation.”
DocuTech/DocuPrint 75/90
The system may display an unclearable Reset
message. The system prints normally.
DocuTech/DocuPrint 75/90
When Offset stacking is enabled, stitched jobs
do not offset.
DocuTech 61xx

DOCUSP 3.6.xx
XEROX DOCUMENT SERVICES PLATFORM SERIES 2-3
GETTING STARTED
Caveat Applicable printer product
During a Print Now or Proof, a message to
“Remove Sheets from the Top Tray” may be
displayed when there is no need to remove
sheets. Always clear the message before
performing any other operation.
DocuTech 61xx
When a job is printing to the top tray and is
interrupted by a print now or proof job, the
interrupted job stops (as it should) and an
error message reads "remove sheets from top
tray". Whether the sheets are removed or not,
the message stays until "reset" is selected in
the fault frame.
DocuTech 61xx
The listp command does not work on the 61xx
system.
DocuTech 61xx
If the system is in power saver mode and all of
the paper trays are empty, when the power
saver mode is reset, the printer may hang with
the printer initializing until paper is added to
the trays.
DocuTech 61xx
External finishing cannot be selected at the
client using the IPP or HTTP gateways.
Submit the job to the printer without any
finishing, and select the external finisher at the
DocuSP.
DocuPrint 1xx EPS
DocuTech 61xx
Do not apply late binding attributes (Apply
Properties Now) and Reposition Output
options on the same job.
DocuPrint 1xx EPS
Intervening DJDE packets cause the EPS and
LPS to process GRAPHIC DJDEs differently.
LPS prints the data on the same page. EPS
prints the data on two or more pages.
DocuPrint 1xx EPS
For multi-copy jobs, if an OTEXT command is
specified on a copy pass for a page that
doesn't print (no data on the page), then the
OTEXT message will not be displayed and the
WAIT parameter will be ignored.
DocuPrint 1xx EPS
The system is unable to resume printing when
late binding attributes and page spacing
options are used. As a work around, restart
the DocuSP or Select Sample Current job
from the Printer drop down menu to activate
the resume and sample button on the
repositioning output dialog box and the
Resume button on the DocuSP main window.
DocuPrint 1xx EPS

DOCUSP 3.6.xx
2-4 XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
Caveat Applicable printer product
Fast scan registration is off by –1/8 inch
between a 300 dpi and a 600 dpi queue.
DocuPrint 1xx EPS
If the system crashes during the submission of
a streaming job, the job must be cancelled
from the client and resubmitted.
All
If the system is set to Retain the last 50 jobs,
the jobs are deleted when a software upgrade
is performed.
All
If an alignment of over 275mm is made and
Apply Properties Now selected, the job will be
aborted with a C16-350 error.
All
After a software installation, the PCL paper
sources window is unexpectedly blank the first
time you select Queue Manager, Paper
Sources. Close the windows and reopen and
the default values will appear.
All
Jobs with extreme Alignment shifts will fault.
For example:
-Dots with extreme positive values
-Scan lines with extreme positive or
negative values
As a work around, use a shift magnitude
slightly less (>0.01 inches) than the extreme
value.
NOTE: Dots with extreme negative values will
not fault.
All
When entering an image shift with values less
than 1 inch, enter a leading 0 (e.g. 0.5) before
the decimal point.
All
Do not send list files or other ASCII jobs to the
TIFF decomposer. The jobs will fault without
a message.
All
No job name is created for an ASCII
document when the job name is not specified
during job submission. This is also a problem
for a saved Job since the saved job name is
created from a job name that does not exist.
All
The job progress update is not consistent in
the Properties Tab and the DocuSP main
window.
All
If you save a job as Single-page TIFF and
then save the same job with the same name
as Multi-page TIFF, the job is successfully
saved over the Single-page TIFF job.
All

DOCUSP 3.6.xx
XEROX DOCUMENT SERVICES PLATFORM SERIES 2-5
GETTING STARTED
Caveat Applicable printer product
A job submitted through the lpr gateway with
image shifts on exception pages uses values
from the job level image shift instead.
Program the image shift values for the
exception pages in Job Properties.
All
Processing performance on a 600x600 dpi
queue is considerably less than performance
on a 300x300 dpi queue. Not selecting the “fit
to page” selection in the driver increases the
performance.
All
Type 1 fonts with an invalid “BlueValues” field
may not install correctly.
All
When a preinstalled stock sized 12x18 inches
is selected for a paper tray, a new name is
created in the stock list. The ! delimiter and a
number will be appended to the name.
All
The Output Delivery change (Face Up or Face
Down) does not take affect when the change
is made while a job is printing and the Apply
Properties Now is selected.
All
An internal error requiring a restart of the
DocuSP controller occurs when changing the
job ticket programming for exception pages,
covers, and inserts on a saved job in Reprint
Manager.
All
If multiple users are submitting requests to the
IPP Gateway, the requests are managed one
at time at the DocuSP controller. If a user is
sending a large job through XDS Plus then all
other users who try to connect, use, or submit
a job will not be able to do anything until that
job is submitted, and XDS Plus will appear to
hang.
All
Jobs printed with the –nofinishing option fault
at the controller requesting an external
finisher. Reprogram the job at the controller.
All
Jobs that contain multiple setpagedevice
commands for copycount, collate, and
finishing may not print correctly.
All
A reprint job requiring full cut tab stock
becomes ineligible requesting plain drilled
stock. Reprogram the job in Job Manager or
Reprint Manager for full cut tab stock.
All
The job status displayed in the Main status bar
may be different from the status displayed for
the job in Job Manager.
All

DOCUSP 3.6.xx
2-6 XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
Caveat Applicable printer product
Total pages saved in the Job Properties for a
saved job does not reflect the total number of
saved pages.
All
If an active window is minimized or hidden
behind the DocuSP Print Services window, the
mouse is inoperable and an alert tone will
sound. Minimize the DocuSP Print Services
window to find the hidden active window.
All
Solaris 8 does not allow ftp, file transfer
process, to be used with root user access.
Any processes that use ftp that have typically
used root access need to be modified to use
another user. For example, DigiPath
NetAgent and Production Print features, VIPP
resources, or font transfer.
All
The Walk Up user can print any files on the
DocuSP controller using the Reprint Manager
tab in Job Manager, including any files set for
read only access by root or any sample jobs.
All
Do not use the Apply Properties Now button in
Queue Manager to change job attributes to
using ordered stock. The job will fault.
All
PCL fonts cannot be loaded from a directory
that contains multiple subdirectories. In order
to load PCL fonts from a directory, create a
Font directory and store the fonts in that
directory. Do NOT use the /font directory,
located in root on all DocuSP systems, to
store uninstalled fonts. Avoid using long
directory structures for font installation.
All
At this time, setting up the HTTP, and SNMP
gateways cannot be accomplished through the
graphical user interface. The gateways and
the common settings must be set using the
gwConfig utility through a UNIX Terminal
window. The instructions for performing the
gwConfig utility are included in the Document
Services Platform System Guide.
All

DOCUSP 3.6.xx
XEROX DOCUMENT SERVICES PLATFORM SERIES 2-7
GETTING STARTED
Caveat Applicable printer product
The following are known problems with the
HTTP gateway and DocuSP Web Interface:
ÞDo not specify an ampersand (&) in the
sender name, file name (print ready), or
Queue name fields.
ÞFaulted jobs display as held in the queue
list.
ÞWhen the DocuSP Web Interface is
accessed from a client workstation, the
web URLs displayed in the Support
section are placeholders.
All
For the IPP gateway using XDS Plus:
ÞSend jobs to a spooling queue only. Do
not send jobs to a streaming queue.
All
After a restart or reboot, ineligible jobs in a
held queue move to an active window and
change status to pending.
All
Negative image shift values do not display the
negative sign but the job prints correctly.
All
An insert programmed for a paper type
custom displays as the main paper stock type
of the job. The insert prints correctly on the
custom stock.
All
The following fonts are no longer part of the
resident PostScript font set of the DocuSP:
Barmeno-Regular
Barmeno-Medium
Barmeno-Bold
Barmeno-ExtraBold
Formata-Regular
Formata-Medium
Formata-Italic
Formata-MediumItalic
Jobs that use any of these fonts will fault at
the controller. Select a different font.
All
When a PostScript font is loaded, the font is
immediately available. However, a restart of
the DocuSP software is required before the
font is listed in the font window.
All
Imposition is available for PS and PDF only.
Imposition is not supported for PCL, LCDS,
VIPP, or ASCII jobs. If non supported jobs
are submitted and modified to be imposition
jobs, the jobs print as normal and not fault.
All, Imposition only

DOCUSP 3.6.xx
2-8 XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
Caveat Applicable printer product
The Sides Imaged value for signature layouts
must be either the Queue default value or the
job must be programmed to be Head-to-Toe
regardless of the orientation.
All, Imposition only
If the original size of the job is changed during
the printing process, such as after a proof has
been run, the Original Size is set to the default
Letter size. Be sure to check and, if
necessary, change the Original Size before
printing the job.
All, Imposition only
The value shown in the Current Stock Size
field does not update to match the Size value
on the Stock tab.
All, Imposition only

DOCUSP 3.6.xx
XEROX DOCUMENT SERVICES PLATFORM SERIES 2-9
GETTING STARTED
Security
The following notes and caveats are specific to Security issues
on the DocuSP controller.
-The IPP Gateway loads an unsecured version of Java. If
security is an issue, do not use the IPP Gateway.
DocuJob Converter
– The DocuJob Converter software must be at least version
2.1.04. This version corrects a timing problem that resulted
in jobs being lost at the controller.
– Version 2.2 of the DocuJob Converter software, which runs
under Solaris 2.6 on a Sun Ultra 60 platform, is available.
VIPP Interpreter
– VIPP 4.0 demo mode is included with a DocuSP 3.6.xx new
installation. In order to fully use VIPP 4.0, a production kit
and a license will need to be obtained from your Xerox
representative. Existing DocuSP customers with a VIPP
license should be able to upgrade to DocuSP 3.6.xx and
VIPP 4.0. In order to use VIPP 4.0, the DocuSP must be at
version 3.1 or higher.
– Please reference the VIPP documentation for additional
information pertaining to VIPP.
DigiPath
– Please reference the DigiPath 3.0 Customer Software
Release Supplement for additional information pertaining to
DigiPath.
Clients
– Please reference the Xerox Production Print Services
version 3.6.xx documentation for more information.
– Macintosh clients using the AppleTalk Gateway submit jobs
very slowly or hang during submission, requiring a reboot of
the DocuSP controller.

DOCUSP 3.6.xx
2-10 XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED