Xiaomi Mi Band 3 User manual

Xiaomi Band 3
User Manual

Read this manual carefully before use, and retain it for future reference
Touchscreen
Buon
Heart Rate Monitor
Charging Port
01 Product Overview
Charging Cable
c
Fitness Tracker
aWristband
b

1. Insert one end of the fitness tracker into the slot from the front of the wristband.
2. Press down on the other end with your thumb to push the fitness tracker into the slot
completely.
02 Installing the Fitness Tracker

Tighten the wristband around your wrist until there is enough slack to fit about one finger, then
adjust the fit until you find a comfortable position.
Note: Wearing the band too loosely may impact data collection by the heart rate monitor.
03 Wearing the Xiaomi Band

Mi Fit
QR code for the Mi Fit app
(Android 4.4/iOS 9.0 or later)
1. To download the Mi Fit app, scan the QR code below or search for "Mi Fit" on the Mi App Store
or Apple Store.
04 Pairing the Xiaomi Band with a Smartphone
2. Open the Mi Fit app, log in to your account and select "Device Pairing", then follow the pairing
instructions to proceed. When the Xiaomi Band starts to vibrate and the Bluetooth pairing
notification appears on the screen, press the buon to complete the pairing process.
Note: Please make sure Bluetooth connection is activated on your mobile phone. During the
pairing process, please keep the Xiaomi Band near your mobile phone.
Note: This diagram is for reference only
My Xiaomi Band did not vibrate
When the Xiaomi Band starts to
vibrate, touch the buon on the
wristband to confirm pairing.
Press the buon on the
wristband to confirm pairing
Touch
Touch

Aer the Xiaomi Band is paired successfully, it will begin to track and analyze your daily activities
and sleeping habits.
Touch to light up the screen. Slide up or down on the screen to browse your activity data, measure
your heart rate, and access many other features.
Slide le or right on the screen to switch the display between different items.
05 Using the Fitness Tracker
Slide le/right on
the screen to switch
between items
Slide up or down to
switch between
different functions

Remove the wristband from your wrist, hold on to each end and pull on the wristband until you
see a small gap between the fitness tracker and the wristband. Use your finger to pop the fitness
tracker out of its slot from the front side of the wristband.
06 Removing the Fitness Tracker

Please charge your Xiaomi Band immediately when the low power indicator is on.
07 Charging the Xiaomi Band

When using the Xiaomi Band to measure your heart rate, please keep yourwrist steady.
Xiaomi Band 3 has a water resistance rating of 5ATM. It can be worn in the shower, swimming
pool, or while swimming near the shore. It cannot be used, however, while siing in a sauna or
diving in the ocean.
Underwater operation is not supported for the Xiaomi Band's touch-buon and touchscreen.
Aer the Xiaomi Band has come in contact with water, please use a so cloth to wipe away
excess water from its surface before using the device.
During daily use, please do not wear the Band too tightly around your wrist and keep its contact
area dry. You should also clean the wristband regularly with water. Please stop using the product
immediately and seek medical assistance if the contact area on your skin begins to show signs
of redness or swelling.
08 Important Safeguards

Name: Xiaomi Band 3
Model: XMSH05HM
Weight of the Fitness Tracker: 8.5 g
Dimensions of the Fitness Tracker: 17.9 x 46.9 x 12 mm
Wristband material: Thermoplastic elastomer
Clasp material: Aluminum alloy
Adjustable length: 155 - 216 mm
Compatible with: Android 4.4/iOS 9.0 or later
Baery capacity: 110mAh
Baery type: Li-Ion polymer baery
Input voltage: DC 5 V
Input current: 250 mA (Max)
Frequency: 2402-2480MHz
Max output: 0dBm
IP rating: 5ATM
Operating temperature: -10°C ~ 50°C
Wireless connectivity: Bluetooth 4.2 BLE
09 Specifications