Xiaomi W2 User manual

Smart Pet Water Fountain

Parts DiagramMain Body Filter CoverWater PipeFilterAnti-bacterial Pack(Optional)USB CableTransparent CoverDrinking Tray

Product IntroductionTransparent CoverDrinking TrayWater PipeFilter CoverFilterWater LineBodyIndicatorFunction KeyWater PumpUV Lamp(Optional)Anti-slip Mat In-built powercableAnti-bacterial Pack(Optional)It has multiple functions such as antibacterial,strengthening immunity and supplementingminerals and trace elements required by pets.

Assemble Instructions① Please fix the filter into the filter cover and assemble it under the drinking tray.(Install the Chitosan into the bottom of the filter cover)③ Please align the drinking tray with the related position of the main body, and insert the other side of water pipe into soft rubber of water pump.④ Tighten the transparent cover according to the buckle position of the main body.② Please insert the head of the water pipe into the side outlet of drinking tray.

Device will keep dispensing water after power on.Dry burning protection: The pump will stop working when the water level is lower than the MIN line. But it will return to work automatically after adding the water.Function InstructionsW2 Basic VersionPlease download the E-Manual from our websitewww.petwant.comPlease take the E-manual manual for your operation reference.W2 WiFi Version

Device will keep dispensing water after power on."Normal" will be default mode, double click "Function key " to switch mode; Normal-dispense water continuously Smart-dispense water intermittentlyLong press the Function key for 3 Seconds to turn on the heating function. When the water temperature is detected to be lower than 26℃, the device will heat automatically until reaches up for 30℃. After heating, the device will switch to insulation state.Indicator Status:Working: white light will be solid for both“Normal”&”Smart”working modeLow water alarm: White indicator for Normal & Smart will flash in the meanwhile. Heating: Blue light flash. Insulation: Blue light will be solid.Function InstructionsW2 Heating Version

Device will keep dispensing water after power on."Normal" will be default mode, double click "Function key " to switch mode;Normal-dispense water continuously Smart-dispense water intermittentlyLong press the Function key for 3 seconds to turn on/off the device. The UV sterilization lamp will automatically turn on/off according to the internal logic of the program. When it is turned on, the device white light flashes for correspond-ing modeNote: To ensure your safety, UV lamp will stop working as soon as users take out the water tray which controlled by magnetic switch. And it will return normal after water tray is well assembled.Function InstructionsW2 UV Version

Attention1. Please cut off the power as soon as you do not use the device.2. Base is forbidden to soak into water, please cut off the power while wiping the base and keep dry before using.3. Please ensure the water level is over "Min" Line and below "Max" Line.4. Please ensure the water is below the Max water line.5. The transparent cover is detachable, please do not lift up the waterer seperately.6. Filters are suggested to replace every two months to ensure the filtration effect.7. Please do not watch the UV lamp in direct sight when Normal indicator are flashing.8. Device will stop working and normal/smart indicators will flash when the water level is below Min line.It will alarm you 10 times to remind you filling the water and water fountain will return normal when the water is over the Min line.9.It’s recommended to take out the filter for cleaning while cleaning the water fountain. The impurities on the PP cotton of the filter will affect the water quality and the permeation of the water fountain.Product NameDimensionNet WeightMaterialCapacityDrinking DepthSmart Pet Water FountainW200mm*D200mm*H207mm750gABS1.5L2cm