Xiaomi AX9000 User manual

Router AX9000 User Manual

2.5 G network port
(WAN/LAN 1)
1 G network port
(WAN/LAN 1)
LAN2、LAN3、LAN4
Optical modem/
broadband modem
As per your
broadband provider
Network socket
LAN Port
Download the Mi Home/Xiaomi Home app
Step 1: Connect the cables
Power buon
RESET
Connect the power
Connect to a power socket
* If your Internet network is connected via an Ethernet cable at the wall, connect the Ethernet cable
directly to the Internet (WAN) port on the router
Power on the router, then connect the Internet (WAN) port to the DSL/
Cable/satellite modem
* The power is on when the power buon is pressed down. The power is off when the power buon is
raised.
* When the 2.5 G network port is used as the WAN port, the 1 G network port is used as the LAN port.
When the 1G network port is used as the WAN port, the 2.5 G network port is used as the LAN port
Scan the QR code to download and install the app. You will be directed to
the connection setup page if the app is installed already. Or search "Mi
Home/Xiaomi Home" in the app store to download and install it.
* If you have already installed the Mi Home/Xiaomi Home
app on your smartphone, please make sure that you are
using the latest version available online
or
1
Download the Mi Home/
Xiaomi Home App

Method 1: Configure your router via the Mi Home/Xiaomi Home app
Step 2: Set up the network connection
1. Connect to the Wi-Fi using your
smartphone or computer (no
password). The Wi-Fi name can be
found on the panel at the base of
the router
2. Open the Mi Home/Xiaomi
Home app and tap "Start
adding" in the pop-up window
2
Finding your device
* Wait until the system indicator light turns white. Search for the Wi-Fi network and connect
4. Configure your Wi-Fi and set a Wi-Fi password. You can choose to use your Wi-Fi
password as the administrator password for your router as well
Wi-Fi name
Wi-Fi password
Internet guide
Next step
Network established
successfully
Set up as new router
Add to existing mesh network
New router configuration
3. Tap "Set up as new router"
WLAN
Turn on WLAN
xiaomi-router-ra70_miapxxxx
xiaomi-router-ra70_miapxxxx_5G
xiaomi-router-ra70_xxxx_5G_Game Start adding
Ignore
* If a pop-up window does not appear in the
Mi Home/Xiaomi Home app, tap the "+" icon
in the upper-right corner of the app and
select your router to start configuration
* Wait until the System status indicator stops
flashing and turns white. Search for the Wi-Fi
network and connect

Method 2:Configure your router via web page
Broadband account number
Account password
Next step
Connect to the Internet
MiWi-Fi.com
* Wait until the system indicator light turns white. Search for the Wi-Fi network and connect"
WLAN
Turn on WLAN
xiaomi-router-ra70_miapxxxx
xiaomi-router-ra70_miapxxxx_5G
xiaomi-router-ra70_xxxx_5G_Game
* The Wi-Fi module will restart aer this step has been completed. As your Wi-Fi restarts, it will be
undiscoverable for a short time, please wait a moment before searching again
If you have forgoen your
broadband account name or
password, you can
get them by contacting your
broadband provider
2. At this point, you will automatically be directed to the landing page for
connecting to the Internet (if you aren’t, open up the browser that comes
with your system and enter "router.miWi-Fi.com" or "192.168.31.1")
1. Connect to the Wi-Fi using a mobile phone or computer (no password).
You can find the product specification label at the base of the router,
which is marked with the Wi-Fi name.
3
Thank you for using Mi Router
Start
4. Configure your Wi-Fi and set a Wi-Fi password. You can choose to use your Wi-Fi
password as the administrator password for your router as well
Wi-Fi name
Wi-Fi password
Internet guide
Next step
Network established
successfully
3. Please enter the account name and password provided by your broadband
provider, then click Next (there are different ways of connecting to the
internet, so this step may be skipped)

4
For network coverage over a larger area, you can purchase multiple, meshnet-enabled
Mi Wi-Fi routers*. Please follow the steps below to set up your mesh network
1. Set up the Mi Router AX9000 as the central access point and complete network
configuration. Both indicators on the front of the router should be solid white.
2. Place another router that supports mesh networking with your Mi Router AX9000
next to the central access point; this router will act as a satellite node. Make sure
that the two routers are no more than 1m apart so as to avoid interference, which
may disrupt the network configuration process. Connect to a power supply and
wait 2-3 minutes for the System status indicator on the satellite node to turn
white/blue. At this point, the central access point will automatically discover the
satellite node. The Internet status indicator on the central access point will start to
flash intermiently (once per second)
* Please make sure that the satellite node has not been pre-configured. If the satellite node has already been
configured, press and hold the Reset buon on the device for at least 5 seconds to reset, then try again
Press the Mesh buon on the central access point to start wireless mesh networking. The Internet
status indicator on each router will begin to flash intermiently (twice per second), indicating that
mesh networking pairing is in progress
Method 1 (recommended)
* For the product models and versions of meshnet-enabled Mi Wi-Fi routers, please refer to mi.com/global
Configuration
Pre-configuration
Mi mesh networking
Internet
Mesh buon
Central access pointSatellite node

5
①How does the 4K QAM feature work?
The 5G_Game band on the Mi Router AX9000 supports 2×2 4K QAM technology.
Enjoy maximum theoretical wireless speeds of up to 2882Mbps when used
together with a 4K QAM-enabled smartphone (20% faster than 1024 QAM)
Wait for the Internet status indicator on each router to turn solid white or solid
blue, indicating that mesh networking has been successfully configured. Once
mesh networking has been successfully configured, you can move the satellite
node to your desired location for extended network coverage. You should avoid
placing the satellite node and central access point in locations which are too far
from one another or interrupted by multiple walls
Mesh networking successful
Mesh networking successful
Method 2
Method 3
Use a network cable to connect the LAN port of the central access point to the WAN port of
the satellite node and configure wireless mesh networking. The Internet status indicator on
both routers will begin to flash intermiently (twice per second), indicating that mesh
networking pairing is in progress
Use the Mi Home/Xiaomi Home app to add and connect to the central access point. Then
open Router Management and tap "Mesh network devices", follow the prompts to add the
satellite node to your mesh network
Mesh network devices
Wi-Fi router
Profile
Wi-Fi router
Internet
Central access point
Satellite node

②How do I set up ambient lighting?
To set up ambient lighting for your router, connect your device to the Mi
Home/Xiaomi Home app and configure the light seings. Set the colour and effects
of the X-shaped light strips on the top of the router
③I have finished seing up my network. Why can I still not connect to the internet?
Step 1: Use your phone to search for the Wi-Fi network set by your router. If you can't
find it, make sure that the router is connected to the power supply and has finished
booting up
Step 2: Connect your phone to your router's Wi-Fi network, go to "router.miwifi.com"
and try using the network diagnostic results to fix the problem
④I've forgoen the administrator password for my router. What should I do?
If you haven't set a specific password, your administrator password will be the same
as your Wi-Fi password, so try using this to log in. If the problem persists, we
recommend that you restore your router to the factory seings, then set up the
network again
⑤How do I restore my router to the factory seings?
First make sure that the router has finished booting up, then hold down the Reset
buon at the base of the router for more than 5 seconds and let go when the system
status indicator turns orange. When the router finishes booting up again, the reset
will be successful
USB 3.0 port
USB 3.0 port
USB 3.0 port
Can be used to connect USB storage devices. Use your smartphone or TV
to access films, photos and other files stored on the USB device.
6

Status Indicator
System
System status indicator
The router is not connected to a power sourceOff
Flashing: System update in progress
Solid (turns white aer approx. one minute):
The system is booting up
Solid (does not turn white aer approx. two
minutes): System fault
Orange
Solid: Working normallyWhite
Two-colour indicator light (white, orange)
Intermient flashing (once per second): A satellite
node has been discovered for mesh networking
configuration
Intermient flashing (twice per second): Mesh
network pairing in progress
Internet status indicator
Internet
The network cable is not plugged into the
WAN port
Off
Solid: The network cable is plugged into the
WAN port but the upstream network is not available
Orange
Two-colour indicator light (white, orange)
Solid: The network cable is plugged into the WAN
port and the upstream network is available
White
7

8
Certifications:
Certifications:
Hereby, Xiaomi Communications Co., Ltd declares that the radio
equipment type RA70 is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the
following internet address:
hp://www.mi.com/global/service/support/declaration.html
All products bearing this symbol are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should not be
mixed with unsorted household waste. Instead, you should protect
human health and the environment by handing over your waste
equipment to a designated collection point for the recycling of waste
electrical and electronic equipment, appointed by the government or
local authorities. Correct disposal and recycling will help prevent
potential negative consequences to the environment and human
health. Please contact the installer or local authorities for more
information about the location as well as terms and conditions of such
collection points.
This device is restricted to indoor use only when operating in 5150-5350MHz
frequency range in following countries:
Operating Frequency and Radio Frequency Power
WiFi 2412MHz~2472MHz (≤20dBm), 5150MHz~5350MHz (≤23dBm)
5470MHz~5725MHz (≤30dBm),5725-5850MHz（≤14dBm)

9
Name: Router AX9000
Model: RA70
Operating Temperature: 0~40℃Input: 12V, 4A
Wireless IEEE 802.11a/b/g/n/ac/ax (2.4GHz/5GHz) WiFi
Manufactured by: Xiaomi Communications Co., Ltd
Manufactured by: #019, 9th Floor, Building 6, 33 Xi'erqi Middle
Road, Haidian District, Beijing, China, 100085
Technical Specifications
You can find the product specification label at the base of the device.
Caution:
The product can be used within all European Union countries.
To comply with CE RF exposure requirements, the device must be
installed and operated 20cm (8 inches) or more between the product and
all person’s body.
The adapter shall be installed near the equipment and shall be easily
accessible.