XIMEA CURRERA-R User manual

www.ximea.com
CURRERA-R Starter Kit Quick start guide
To start working with the Starter Kit you will also need:
• PCDisplaywithstandardAnaloginput
• PCDisplayCable
• USBmouse
• USBkeyboard
1 Mount CURRERA to the Tripod Adapter
UsefourscrewsandhexkeytoattachCURRERAtotheTripodAdapteras
shownontheright.Youmayprefertoconnectthecablesrstasdescribed
inthestep3.
2 Attach Lens
RemovesensorcaprstandattachlensusingthesuppliedC/CSmount
adapter.
3 Connect cables
ConnectSystemCabletoSystemPort(Middleone).
ConnectBOB144toSystemCable.
ConnectUSBhubtoUSBportonBOB144.
ConnectUSBmouseandUSBkeyboardtoUSBhub.
ConnectVGAadaptertoDisplayportandconnectyour
VGAmonitor.
ConnectpowersupplytoEXTPWRportwhichiscon-
nectedtoAUXonBOB144.
4 Power up
Plugpowersupplytotheline.PWROKledshouldlight
upandthebootshallproceedwithinfewseconds.
5 Run the xVIEVER application
AssoonasWindowsdesktopappears,youmaystartxviewerapplicationlocatedon
desktoptoseeliveimagefromcamera.
Systemport
DisplayportEthernetport

www.ximea.com
Packing list
• CURRERA-RRL13
• LensFUJINONHF16HA-1B
• DesktopTripodwithAdapter
• FourM3screwsforCURRERAtoTripodAdaptermounting
• HexKey
• 2m1000MEthernetcable(green)
• DisplayCableadapter
• Systemcable
• BOB144(breakoutPCB)
• BOB144description
• Powersupply(24V/1.25A)
• Gettingstartedguide
• SystemImageRecoveryUSBStick
Preinstalled software
• Windowsembededstandard2009
• Bonjourservice
• Sensordrivers
• xiViewer
• OptionalVisionLibrariesDemos