13 14
15 16 17 18 19 20
SAFETY CONDITIONS AND HAZARDS
To minimize the risk of starting a fire, electric shock, fire,
mutilation:
1. Please read the present manual carefully before using
the device.
2.
Use the device according to its intended purpose
described in the user manual.
3. The device is designed for wireless charging of mobile
phones. The device is not intended for industrial or
laboratory use.
4. Do not immerse the device in water or other liquids.
5.
The device can only be operated at room temperature. Do
not expose the product to harmful weather conditions.
6.
Do not start the device if it has a damaged power cord or
plug. If the power cord is damaged, it must be replaced
by the service or a person authorized to do so, otherwise
electric shock may occur.
7. This equipment may be used by children aged 8 years
or more and by persons with reduced physical, mental
abilities, and persons without experience in using and
knowledge of the device, if supervision or instruction
is provided regarding the use of the equipment in a
safe manner so that the risks involved are understood.
Children should not play with the device. Unsupervised
children should not carry out the cleaning and mainte-
nance of the device.
8.
Do not place or store the device in a place where it may
fall or be pulled into a bathtub or sink.
9. Do not use the appliance while bathing in the bath or
under shower, as it may cause electric shock.
10.
After each use or in the event of a fault, the device should
be disconnected from the mains.
Model: WC500x
Input voltage: 5.0V 2.0A, 9.0V 1.8A, 12.0V 1.5A
Output power QI: 5.0W/7.5W/10.0W/15.0W
Charging distance: 3-8 mm
Charging eiciency: up to 73%
Operating frequency: 110kHz-205kHz
DEVICE DESCRIPTION
INSTALLATION AND INITIAL STARTUP
Charger coil
Charge Status Indicator
1. Connect the mains charger to the wireless charger with a cable from the UCB C - USB C type kit.
2. After correctly connecting the mains charger with induction charger, the led circle around the charger will turn green:
3. Place the mobile device on the charger in the position presented in the figure below. Once the device is correctly positioned on
the charger, the charger circle will illuminate blue.
11. Do not use the mains cable to carry the device.
12. Do not touch the mains cable, equipment and device
with hot tools. The power cord must not be in direct
contact with hot components of the device.
13.
Do not place the device or its equipment on or near
unstable or hot surfaces.
14.
The temperature of the accessible surface of the device
during operation may be high. Do not place foreign
objects such as metal objects, magnets or magnetic
stripe cards between the wireless device and the
wireless charger. In this case the mobile device may
not charge properly or may be damaged as a result of
overheating.
INTRODUCTION
Thank you for the trust you have placed in us when you purchased your Xline device.
We are convinced that this high quality device will provide you with a lot of joy and satisfaction during its use.
PLEASE CAREFULLY READ AND FOLLOW THE USER MANUAL!
This device is intended for domestic or other non-commercial use. The manufacturer will not be held liable for damages resulting
from improper or non-compliant use.
TECHNICAL DATA
In addition, always check the charging status, which will be determined by the charging icon displayed on the screen of the mobile
device. If the phone has inductive charging and the icon does not indicate charging, check the device wireless charging options.
4. After charging the device, remove it from the induction charger. The device and the phone heat up during charging, this should
be considered normal.
CAUTION! SOME CASES, AND COVERS PUT ON THE PHONE MAY CAUSE INTERRUPTIONS IN CHARGING OR LACK THEREOF. IN ORDER
TO CORRECTLY CHARGE THE PHONE, YOU NEED TO REMOVE ALL ADDITIONAL ELEMENTS.
CAUTION! DEPENDING ON THE PURCHASED WIRELESS CHARGER, IT MAY BE NECESSARY TO PURCHASE A SEPARATE MAINS CHARGER
WITH APPROPRIATE PARAMETERS, WHICH ARE INDICATED IN THE TECHNICAL DATA
INDUCTION CHARGING TROUBLESHOOTING
ECOFRIENDLY AND ENVIRONMENTALLY FRIENDLY DISPOSA
This device is marked, in accordance with Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste
electrical and electronic equipment (WEEE), with the symbol of a crossed-out waste container:
Do not dispose of the device marked with this symbol together with household waste.
For disposal return the device to your local waste treatment and disposal facility or contact your local authorities.
YOU CAN HELP PROTECT THE ENVIRONMENT!
Proper handling of waste electrical and electronic equipment contributes to avoiding harmful consequences for human health and
the environment resulting from the presence of hazardous components and improper storage and processing of such equipment.
WARRANTY CONDITIONS FOR WIRELESS CHARGER
1. ART-DOM Sp. z o.o. with its registered oice in Łódź (92-402) at ul. Zakładowa 90/92 National Court Register Number 0000354059
(Guarantor) guarantees that the purchased device is free from physical defects. The warranty covers only defects resulting from
the causes inherent in the item sold (manufacturing defects).
2.
A disclosed defect will be removed at the Guarantor’s expense within 14 days from the date of reporting the damage to the
authorized service or point of sale.
3.
In exceptional cases, e.g. the need to import spare parts from their manufacturer, the repair period may be extended up to 30 days.
4. The warranty period for the user is 24 months from the date of delivery of the goods.
5. The goods are intended for use only in the conditions of an individual household.
6. The present Warranty does not cover:
a. damage caused by using the device in a manner inconsistent with the user manual,
b. mechanical, chemical or thermal damage,
c. repairs and modifications made by companies or persons not authorized by the manufacturer,
d. parts that are easy to use by nature or consumables such as: batteries, bulbs, fuses, filters, knobs, shelves, acces-
sories,
e. installation, maintenance, inspection, cleaning, unlocking, removal of contaminants and instruction.
Problem Solution
Phone is not
charging
or phone is
charging
with inter-
ruptions.
Check in the user manual whether the phone has an inductive charging function.
Check the phone settings options to enable the inductive charging function. If disabled, turn it on.
Place the centre of the phone in the middle of the induction charger. The phone charging coil and the induction
charger coil must be aligned in one axis.
Remove the protective case from the phone. Too thick a protective case will prevent conduction of the induction field.
Change the mains charger to a more powerful one, the minimum power of the mains charger is 5V 2A.
7. The Guarantor will select the mode of defect removal at its own discretion. The removal of confirmed defect will by repair or
replacement of the device. The Guarantor may perform repairs when the buyer requests replacement or the Guarantor may
perform replacements when the buyer requests repair, if bringing the goods (device) into conformity in accordance with the
granted warranty in the manner selected by the buyer is impossible or would require excessive costs at the part of Guarantor.
In particularly justified cases, if repair and replacement are impossible or would require excessive costs for the Guarantor may
refuse to bring the goods into compliance with the guarantee and propose another way to settle the warranty claim.
8. The exchange of goods is made at the point of sale at which the goods were purchased (replacement or refund) or an authorized
service point, if it oers such service (replacement). The returned device must be complete, without mechanical damage. Failure
to comply with these conditions may result in failure to accept the warranty claim.
9. In the event of non-compliance of the goods with the sales contract, the buyer is entitled by law to legal protection measures on
the part and at the expense of the seller, and the warranty does not aect these legal protection measures.
10. The warranty is valid in Poland.
11. The condition for the warranty repair or replacement of the device is the presentation of proof of purchase and the use of the
goods in accordance with the information contained in the operating manual.
CAUTION!
Damage or removal of the rating plate from the device may result in warranty being deemed void.
We are constantly improving our products, so they may dier slightly from the picture shown on the packaging. Pleas read
the user manual before operating the appliance.
ART-DOM Sp. z o.o., ul. Zakładowa 90/92, 92-402 Łódź. National Court Register number 0000354059.
v. 3
15 16
17 18 19 20
SAFETY CONDITIONS AND HAZARDS
To minimize the risk of starting a fire, electric shock, fire,
mutilation:
1. Please read the present manual carefully before using
the device.
2.
Use the device according to its intended purpose
described in the user manual.
3. The device is designed for wireless charging of mobile
phones. The device is not intended for industrial or
laboratory use.
4. Do not immerse the device in water or other liquids.
5.
The device can only be operated at room temperature. Do
not expose the product to harmful weather conditions.
6.
Do not start the device if it has a damaged power cord or
plug. If the power cord is damaged, it must be replaced
by the service or a person authorized to do so, otherwise
electric shock may occur.
7. This equipment may be used by children aged 8 years
or more and by persons with reduced physical, mental
abilities, and persons without experience in using and
knowledge of the device, if supervision or instruction
is provided regarding the use of the equipment in a
safe manner so that the risks involved are understood.
Children should not play with the device. Unsupervised
children should not carry out the cleaning and mainte-
nance of the device.
8.
Do not place or store the device in a place where it may
fall or be pulled into a bathtub or sink.
9. Do not use the appliance while bathing in the bath or
under shower, as it may cause electric shock.
10.
After each use or in the event of a fault, the device should
be disconnected from the mains.
Model: WC500x
Input voltage: 5.0V 2.0A, 9.0V 1.8A, 12.0V 1.5A
Output power QI: 5.0W/7.5W/10.0W/15.0W
Charging distance: 3-8 mm
Charging eiciency: up to 73%
Operating frequency: 110kHz-205kHz
DEVICE DESCRIPTION
INSTALLATION AND INITIAL STARTUP
Charger coil
Charge Status Indicator
1. Connect the mains charger to the wireless charger with a cable from the UCB C - USB C type kit.
2. After correctly connecting the mains charger with induction charger, the led circle around the charger will turn green:
3. Place the mobile device on the charger in the position presented in the figure below. Once the device is correctly positioned on
the charger, the charger circle will illuminate blue.
11. Do not use the mains cable to carry the device.
12. Do not touch the mains cable, equipment and device
with hot tools. The power cord must not be in direct
contact with hot components of the device.
13.
Do not place the device or its equipment on or near
unstable or hot surfaces.
14.
The temperature of the accessible surface of the device
during operation may be high. Do not place foreign
objects such as metal objects, magnets or magnetic
stripe cards between the wireless device and the
wireless charger. In this case the mobile device may
not charge properly or may be damaged as a result of
overheating.
INTRODUCTION
Thank you for the trust you have placed in us when you purchased your Xline device.
We are convinced that this high quality device will provide you with a lot of joy and satisfaction during its use.
PLEASE CAREFULLY READ AND FOLLOW THE USER MANUAL!
This device is intended for domestic or other non-commercial use. The manufacturer will not be held liable for damages resulting
from improper or non-compliant use.
TECHNICAL DATA
In addition, always check the charging status, which will be determined by the charging icon displayed on the screen of the mobile
device. If the phone has inductive charging and the icon does not indicate charging, check the device wireless charging options.
4. After charging the device, remove it from the induction charger. The device and the phone heat up during charging, this should
be considered normal.
CAUTION! SOME CASES, AND COVERS PUT ON THE PHONE MAY CAUSE INTERRUPTIONS IN CHARGING OR LACK THEREOF. IN ORDER
TO CORRECTLY CHARGE THE PHONE, YOU NEED TO REMOVE ALL ADDITIONAL ELEMENTS.
CAUTION! DEPENDING ON THE PURCHASED WIRELESS CHARGER, IT MAY BE NECESSARY TO PURCHASE A SEPARATE MAINS CHARGER
WITH APPROPRIATE PARAMETERS, WHICH ARE INDICATED IN THE TECHNICAL DATA
INDUCTION CHARGING TROUBLESHOOTING
ECOFRIENDLY AND ENVIRONMENTALLY FRIENDLY DISPOSA
This device is marked, in accordance with Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste
electrical and electronic equipment (WEEE), with the symbol of a crossed-out waste container:
Do not dispose of the device marked with this symbol together with household waste.
For disposal return the device to your local waste treatment and disposal facility or contact your local authorities.
YOU CAN HELP PROTECT THE ENVIRONMENT!
Proper handling of waste electrical and electronic equipment contributes to avoiding harmful consequences for human health and
the environment resulting from the presence of hazardous components and improper storage and processing of such equipment.
WARRANTY CONDITIONS FOR WIRELESS CHARGER
1. ART-DOM Sp. z o.o. with its registered oice in Łódź (92-402) at ul. Zakładowa 90/92 National Court Register Number 0000354059
(Guarantor) guarantees that the purchased device is free from physical defects. The warranty covers only defects resulting from
the causes inherent in the item sold (manufacturing defects).
2.
A disclosed defect will be removed at the Guarantor’s expense within 14 days from the date of reporting the damage to the
authorized service or point of sale.
3.
In exceptional cases, e.g. the need to import spare parts from their manufacturer, the repair period may be extended up to 30 days.
4. The warranty period for the user is 24 months from the date of delivery of the goods.
5. The goods are intended for use only in the conditions of an individual household.
6. The present Warranty does not cover:
a. damage caused by using the device in a manner inconsistent with the user manual,
b. mechanical, chemical or thermal damage,
c. repairs and modifications made by companies or persons not authorized by the manufacturer,
d. parts that are easy to use by nature or consumables such as: batteries, bulbs, fuses, filters, knobs, shelves, acces-
sories,
e. installation, maintenance, inspection, cleaning, unlocking, removal of contaminants and instruction.
Problem Solution
Phone is not
charging
or phone is
charging
with inter-
ruptions.
Check in the user manual whether the phone has an inductive charging function.
Check the phone settings options to enable the inductive charging function. If disabled, turn it on.
Place the centre of the phone in the middle of the induction charger. The phone charging coil and the induction
charger coil must be aligned in one axis.
Remove the protective case from the phone. Too thick a protective case will prevent conduction of the induction field.
Change the mains charger to a more powerful one, the minimum power of the mains charger is 5V 2A.
7. The Guarantor will select the mode of defect removal at its own discretion. The removal of confirmed defect will by repair or
replacement of the device. The Guarantor may perform repairs when the buyer requests replacement or the Guarantor may
perform replacements when the buyer requests repair, if bringing the goods (device) into conformity in accordance with the
granted warranty in the manner selected by the buyer is impossible or would require excessive costs at the part of Guarantor.
In particularly justified cases, if repair and replacement are impossible or would require excessive costs for the Guarantor may
refuse to bring the goods into compliance with the guarantee and propose another way to settle the warranty claim.
8. The exchange of goods is made at the point of sale at which the goods were purchased (replacement or refund) or an authorized
service point, if it oers such service (replacement). The returned device must be complete, without mechanical damage. Failure
to comply with these conditions may result in failure to accept the warranty claim.
9. In the event of non-compliance of the goods with the sales contract, the buyer is entitled by law to legal protection measures on
the part and at the expense of the seller, and the warranty does not aect these legal protection measures.
10. The warranty is valid in Poland.
11. The condition for the warranty repair or replacement of the device is the presentation of proof of purchase and the use of the
goods in accordance with the information contained in the operating manual.
CAUTION!
Damage or removal of the rating plate from the device may result in warranty being deemed void.
We are constantly improving our products, so they may dier slightly from the picture shown on the packaging. Pleas read
the user manual before operating the appliance.
ART-DOM Sp. z o.o., ul. Zakładowa 90/92, 92-402 Łódź. National Court Register number 0000354059.
v. 3
11 12
SAFETY CONDITIONS AND HAZARDS
To minimize the risk of starting a fire, electric shock, fire,
mutilation:
1. Please read the present manual carefully before using
the device.
2.
Use the device according to its intended purpose
described in the user manual.
3. The device is designed for wireless charging of mobile
phones. The device is not intended for industrial or
laboratory use.
4. Do not immerse the device in water or other liquids.
5.
The device can only be operated at room temperature. Do
not expose the product to harmful weather conditions.
6.
Do not start the device if it has a damaged power cord or
plug. If the power cord is damaged, it must be replaced
by the service or a person authorized to do so, otherwise
electric shock may occur.
7. This equipment may be used by children aged 8 years
or more and by persons with reduced physical, mental
abilities, and persons without experience in using and
knowledge of the device, if supervision or instruction
is provided regarding the use of the equipment in a
safe manner so that the risks involved are understood.
Children should not play with the device. Unsupervised
children should not carry out the cleaning and mainte-
nance of the device.
8.
Do not place or store the device in a place where it may
fall or be pulled into a bathtub or sink.
9. Do not use the appliance while bathing in the bath or
under shower, as it may cause electric shock.
10.
After each use or in the event of a fault, the device should
be disconnected from the mains.
Model: WC500x
Input voltage: 5.0V 2.0A, 9.0V 1.8A, 12.0V 1.5A
Output power QI: 5.0W/7.5W/10.0W/15.0W
Charging distance: 3-8 mm
Charging eiciency: up to 73%
Operating frequency: 110kHz-205kHz
DEVICE DESCRIPTION
INSTALLATION AND INITIAL STARTUP
Charger coil
Charge Status Indicator
1. Connect the mains charger to the wireless charger with a cable from the UCB C - USB C type kit.
2. After correctly connecting the mains charger with induction charger, the led circle around the charger will turn green:
3. Place the mobile device on the charger in the position presented in the figure below. Once the device is correctly positioned on
the charger, the charger circle will illuminate blue.
11. Do not use the mains cable to carry the device.
12. Do not touch the mains cable, equipment and device
with hot tools. The power cord must not be in direct
contact with hot components of the device.
13.
Do not place the device or its equipment on or near
unstable or hot surfaces.
14.
The temperature of the accessible surface of the device
during operation may be high. Do not place foreign
objects such as metal objects, magnets or magnetic
stripe cards between the wireless device and the
wireless charger. In this case the mobile device may
not charge properly or may be damaged as a result of
overheating.
INTRODUCTION
Thank you for the trust you have placed in us when you purchased your Xline device.
We are convinced that this high quality device will provide you with a lot of joy and satisfaction during its use.
PLEASE CAREFULLY READ AND FOLLOW THE USER MANUAL!
This device is intended for domestic or other non-commercial use. The manufacturer will not be held liable for damages resulting
from improper or non-compliant use.
TECHNICAL DATA
In addition, always check the charging status, which will be determined by the charging icon displayed on the screen of the mobile
device. If the phone has inductive charging and the icon does not indicate charging, check the device wireless charging options.
4. After charging the device, remove it from the induction charger. The device and the phone heat up during charging, this should
be considered normal.
CAUTION! SOME CASES, AND COVERS PUT ON THE PHONE MAY CAUSE INTERRUPTIONS IN CHARGING OR LACK THEREOF. IN ORDER
TO CORRECTLY CHARGE THE PHONE, YOU NEED TO REMOVE ALL ADDITIONAL ELEMENTS.
CAUTION! DEPENDING ON THE PURCHASED WIRELESS CHARGER, IT MAY BE NECESSARY TO PURCHASE A SEPARATE MAINS CHARGER
WITH APPROPRIATE PARAMETERS, WHICH ARE INDICATED IN THE TECHNICAL DATA
INDUCTION CHARGING TROUBLESHOOTING
ECOFRIENDLY AND ENVIRONMENTALLY FRIENDLY DISPOSA
This device is marked, in accordance with Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste
electrical and electronic equipment (WEEE), with the symbol of a crossed-out waste container:
Do not dispose of the device marked with this symbol together with household waste.
For disposal return the device to your local waste treatment and disposal facility or contact your local authorities.
YOU CAN HELP PROTECT THE ENVIRONMENT!
Proper handling of waste electrical and electronic equipment contributes to avoiding harmful consequences for human health and
the environment resulting from the presence of hazardous components and improper storage and processing of such equipment.
WARRANTY CONDITIONS FOR WIRELESS CHARGER
1. ART-DOM Sp. z o.o. with its registered oice in Łódź (92-402) at ul. Zakładowa 90/92 National Court Register Number 0000354059
(Guarantor) guarantees that the purchased device is free from physical defects. The warranty covers only defects resulting from
the causes inherent in the item sold (manufacturing defects).
2.
A disclosed defect will be removed at the Guarantor’s expense within 14 days from the date of reporting the damage to the
authorized service or point of sale.
3.
In exceptional cases, e.g. the need to import spare parts from their manufacturer, the repair period may be extended up to 30 days.
4. The warranty period for the user is 24 months from the date of delivery of the goods.
5. The goods are intended for use only in the conditions of an individual household.
6. The present Warranty does not cover:
a. damage caused by using the device in a manner inconsistent with the user manual,
b. mechanical, chemical or thermal damage,
c. repairs and modifications made by companies or persons not authorized by the manufacturer,
d. parts that are easy to use by nature or consumables such as: batteries, bulbs, fuses, filters, knobs, shelves, acces-
sories,
e. installation, maintenance, inspection, cleaning, unlocking, removal of contaminants and instruction.
Problem Solution
Phone is not
charging
or phone is
charging
with inter-
ruptions.
Check in the user manual whether the phone has an inductive charging function.
Check the phone settings options to enable the inductive charging function. If disabled, turn it on.
Place the centre of the phone in the middle of the induction charger. The phone charging coil and the induction
charger coil must be aligned in one axis.
Remove the protective case from the phone. Too thick a protective case will prevent conduction of the induction field.
Change the mains charger to a more powerful one, the minimum power of the mains charger is 5V 2A.
7. The Guarantor will select the mode of defect removal at its own discretion. The removal of confirmed defect will by repair or
replacement of the device. The Guarantor may perform repairs when the buyer requests replacement or the Guarantor may
perform replacements when the buyer requests repair, if bringing the goods (device) into conformity in accordance with the
granted warranty in the manner selected by the buyer is impossible or would require excessive costs at the part of Guarantor.
In particularly justified cases, if repair and replacement are impossible or would require excessive costs for the Guarantor may
refuse to bring the goods into compliance with the guarantee and propose another way to settle the warranty claim.
8. The exchange of goods is made at the point of sale at which the goods were purchased (replacement or refund) or an authorized
service point, if it oers such service (replacement). The returned device must be complete, without mechanical damage. Failure
to comply with these conditions may result in failure to accept the warranty claim.
9. In the event of non-compliance of the goods with the sales contract, the buyer is entitled by law to legal protection measures on
the part and at the expense of the seller, and the warranty does not aect these legal protection measures.
10. The warranty is valid in Poland.
11. The condition for the warranty repair or replacement of the device is the presentation of proof of purchase and the use of the
goods in accordance with the information contained in the operating manual.
CAUTION!
Damage or removal of the rating plate from the device may result in warranty being deemed void.
We are constantly improving our products, so they may dier slightly from the picture shown on the packaging. Pleas read
the user manual before operating the appliance.
ART-DOM Sp. z o.o., ul. Zakładowa 90/92, 92-402 Łódź. National Court Register number 0000354059.
v. 3
