xmartO WNV14 User manual

Wireless NVR System User Manual
1
User Manual
xmartO Wireless NVR System
Ver. 2.0

Wireless NVR System User Manual
1
Preface
Thank you for purchasing xmartO products! This user manual is to introduce the operations of
xmartO wireless camera systems in more details. If there is any other question which is not covered in
this user manual, please contact xmartO support at [email protected].
Statement
·Though we apply all efforts to make the manual complete and accurate, there could still be
some discrepancies due to products’ timely update.
·The products and manual are subject to change without previous notification.
·The content in this manual is only for users’ reference. We don’t promise it’s exactly the same
with the products you purchase. Detailed information is in accordance with the final products.
·The accessories and parts mentioned in this manual are only for product using guide purpose
and not necessarily to be included in your purchased item.
Special Statement
Please comply with local laws and regulations when you use the surveillance devices.
About default settings
·The default username for NVR is admin (admin is the super administrator ID)
·The default password for account admin is empty, means no password.
·The default IPv4 address of device is: 192.168.1.114
·The default setting of NVR is to overwrite oldest recorded videos when hard drive is
full.
·The device will start Setup Wizard by default when NVR is powered on.

Wireless NVR System User Manual
2
Contents
Preface............................................................................................................................................................................ 1
1. Product Overview ....................................................................................................................................................... 4
1.1 Product Introduction ........................................................................................................................................ 4
1.2 Product Specifications ...................................................................................................................................... 4
1.3 Product Key Features........................................................................................................................................ 5
2. Operation Instructions................................................................................................................................................ 6
2.1 NVR Front Panel........................................................................................................................................................ 6
2.3 Mouse Operation.............................................................................................................................................. 7
2.4 Input Method.................................................................................................................................................... 7
2.5 User Interface Introduction .............................................................................................................................. 7
2.5.1 User Interface Element Description....................................................................................................... 7
2.5.2 Frequently-used Button Description...................................................................................................... 8
3. Installation & Connection........................................................................................................................................... 8
3.1 Installation Precautions .................................................................................................................................... 8
3.2 Install Hard Drive .............................................................................................................................................. 9
3.3 Preparations before Installation ....................................................................................................................... 9
3.4 Camera Mounting Spots ................................................................................................................................. 10
3.5 Antenna Mounting Tips.................................................................................................................................. 10
4. System Operation Introduction ................................................................................................................................ 11
4.1 Starting up/ Login/ Logout/ Reboot/ Close screen display/ Shutdown.......................................................... 11
4.1.1 Starting up ........................................................................................................................................... 11
4.1.2 Login .................................................................................................................................................... 12
4.1.3 Logout.................................................................................................................................................. 12
4.1.4 System Reboot..................................................................................................................................... 13
4.1.5 Close screen display............................................................................................................................. 13
4.1.6 System Shutdown ................................................................................................................................ 13
4.2 Setup Guide .................................................................................................................................................... 13
4.3 Device Manage ............................................................................................................................................... 16
4.3.1 Search Device....................................................................................................................................... 16
4.3.2 Add Device........................................................................................................................................... 16
4.3.2.1 Match Code....................................................................................................................................... 16
4.3.2.2 Auto Add........................................................................................................................................... 18
4.3.3 Modify Device...................................................................................................................................... 19
4.3.4 Advanced ............................................................................................................................................. 20
4.3.5 Delete Device....................................................................................................................................... 21
4.3.6 Manual Edit.......................................................................................................................................... 21
4.3.7 Repeater .............................................................................................................................................. 22
4.4 Channel Setting (CH Setting)........................................................................................................................... 24
4..4.1 Encode Setting .................................................................................................................................... 24
4..4.2 Channel OSD ....................................................................................................................................... 25
4.4.3 Bitrate .................................................................................................................................................. 25
4.4.4 Channel Details.................................................................................................................................... 26
4.4.5 IP Camera............................................................................................................................................. 27
4.4 Network Setting...................................................................................................................................... 28

Wireless NVR System User Manual
3
4.4.1 Network Setting................................................................................................................................... 28
4.4.2. DDNS................................................................................................................................................... 29
4.4.3 FTP ....................................................................................................................................................... 30
4.4.4 E-Mail................................................................................................................................................... 31
4.4.5 PPPoE................................................................................................................................................... 33
4.4.6 3G......................................................................................................................................................... 33
4.4.7 WiFi Setting ......................................................................................................................................... 34
4.5 PTZ Setting...................................................................................................................................................... 35
4.5.1 PTZ Parameter Setting ......................................................................................................................... 35
4.5.2 PTZ Control Operations........................................................................................................................ 36
4.5.3 PTZ Auto Cruise Setup ......................................................................................................................... 37
4.6 Record Setting................................................................................................................................................. 37
4.6.1 Manual Record..................................................................................................................................... 37
4.6.2 Time-scheduled Recording. ................................................................................................................. 38
4.6.3 Motion Detection Recording ............................................................................................................... 39
4.6.4 Alarm-triggered Recording (Sensor Recording) ................................................................................... 41
4.7 Video Playback ............................................................................................................................................... 42
4.7.1 Fast Playback........................................................................................................................................ 42
4.7.2 Manual Playback.................................................................................................................................. 43
4.8 Video Backup.................................................................................................................................................. 44
4.9 Alarm .............................................................................................................................................................. 45
4.9.1 Motion Detection Alarm...................................................................................................................... 45
4.9.2 Video Loss Alarm ................................................................................................................................. 46
4.10 General setting ............................................................................................................................................. 47
4.10.1 General setting .................................................................................................................................. 47
4.10.2 Time Setting....................................................................................................................................... 48
4.10.3 Screen setting .................................................................................................................................... 49
4.10.4 HDD Setting........................................................................................................................................ 50
4.11 System Admin ............................................................................................................................................... 51
4.11.1 System Version................................................................................................................................... 51
4.11.2 HDD Info. ........................................................................................................................................... 52
4.11.3 System Log......................................................................................................................................... 52
4.11.4 User.................................................................................................................................................... 53
4.11.5 System Upgrade ................................................................................................................................. 57
4.11.6 System Maintenance ......................................................................................................................... 58
4.11.7 Factory Setting................................................................................................................................... 58
4.11.8 IPC Maintenance................................................................................................................................ 59
5. Local & Remote Access ............................................................................................................................................. 60
5.1 Brief Introduction ........................................................................................................................................... 60
5.2 View your cameras on computer via IE (Internet Explorer) ........................................................................... 60
5.2.1 Local Access via IE (When your computer and NVR are connected to the same network)......................... 60
5.2.2 Remote Access via IE (When your PC is out of local area network with the NVR, for example: view your
home system from your office computer)............................................................................................................ 62
5.3 View your cameras on computer via CMS PC Client Software ....................................................................... 64
5.5 View cameras on smartphone........................................................................................................................ 69

Wireless NVR System User Manual
4
Tips: If you don’t find your answer here, please logon http://www.xmarto.com/support/ for FAQ; or
contact suppor[email protected].
1. Product Overview
1.1 Product Introduction
The xmartO WNV series network video recorder is our new generation of NVR. It supports wireless
WiFi network video input, real time live view, video playback, and video backup. The NVR system can
be widely used for surveillance of home, business, office, villa, etc.
1.2 Product Specifications
NVR

Wireless NVR System User Manual
5
Camera
1.3 Product Key Features
•H.264, 720p/ 960p/ 1080p wireless network video recorder
•Built-in high-performance high-stability Wi-Fi router module; 720p & 960p NVRs support
802.11b/g/n protocol, 1080p NVRs support 802.11a/n protocol
•Add Wi-Fi IP network camera to NVR by auto match-code
•Video live view/ record/ playback/ backup
•Easy usability (wireless auto pair, setup wizard, frequently used function menu, plug and play)
•Support IPC with ONVIF & N1 protocol
•Network services supported: P2P, DHCP, DDNS, PPPoE, E-Mail, FTP etc.
•Multiple alarm trigger (video loss/ motion detection) and alarm output (buzzer/E-Mail/FTP etc.)
•Support access and control from Android/ Apple phones (or tablets)
•Support access and control from PC via PC client software and IE.
•Support IP camera settings (codec, image adjustment, OSD display etc.)
•Support motion detection with IPC
•Support video cover with IPC
•Support user authority management

Wireless NVR System User Manual
6
2. Operation Instructions
2.1 NVR Front Panel
Image 1
1．POWER: Power Indicator
2．HDD: Hard Drive Indicator
3．Running Status Indicator –When IPC is connected to the NVR, this indicator will blink green
2.2 NVR Rear Panel
Image 2
1. VGA: VGA Video Output
2. HDMI: HDMI Video Output
3. WAN: Connect your NVR to router for Internet connection (This port can also be used as LAN, if
you want to pair camera to NVR)
4. USB: USB Ports (One for mouse operation, and the other for USB backup)
5. DC 12V: Power Input
6. Wi-Fi Antenna connectors

Wireless NVR System User Manual
7
2.3 Mouse Operation
Button
Operation
Effect
Example
Left button
Single click
Choose object
1. Choose button, drop-down box, list box, check box
Double click
Zoom window
1. Switch between multiple view mode and single view
mode
2. Add device
Drag
Set zone
1. Set motion detection zone
2. Choose digital zoom zone
Middle button
Scroll
Change contents
1. Change drop-down box content
2. Switch channels under single view mode
Right button
Single click
Exit
1. Exit the interface
2. Enter quick menu
2.4 Input Method
Image 3
Name
Buttons
Function
Number
0~9
Type in number 0~9
Character
a ~ z
Type in letters a ~ z
Symbols
- / . _ * # @
Type in symbols
Caps
caps
Switch capital and small letter
Back space
←
Delete the character ahead of cursor
2.5 User Interface Introduction
2.5.1 User Interface Element Description
Name
Operation
Effect
Example
Button
Left click mouse
Save or cancel
Apply, confirm, cancel

Wireless NVR System User Manual
8
Open sub interface
Edit, setting
Edit box
Left click mouse
Edit
Edit password
Drop-down box
Left click mouse
Select
Choose language
List box
Left click mouse
View
Channel information
Check box
Left click mouse
Select or cancel
Setup wizard display, display e-seenet at preview
Text
None
Instructions
Title, name
2.5.2 Frequently-used Button Description
Name
Icon
Explanation
Confirm
Save and apply operation, close window (Save and Exit)
Cancel
Cancel the operation
Apply
Save and apply operation, stay at the window (Save and Continue)
Copy to
Copy the settings of this channel to other channels or all
2.6 Menu Introduction
System Setting Menu: General setting, Record setting, Network setting, CH Setting, System Admin.
NVR Main Menu: Split screen, Device Manage, System setting, Video Playback, Video backup, Color
adjust, PTZ control, Manual record, Volume, Setup Guide, Networking, Add by WiFi, Exit System
3. Installation & Connection
3.1 Installation Precautions
Please refer to below tips while install and use the device:
1. To extend the life of the device, please keep the device away from water, high temperature, and
dust. Use it in a well-ventilated place.
2. Please use SATA hard drive, USB devices and mouse purchased from authentic channels.
3. Before use, please ensure the NVR has correct ground connection. Power source should not exceed
the indicated normal working voltage range in the specs sheet.

Wireless NVR System User Manual
9
3.2 Install Hard Drive
Image 4
3.3 Preparations before Installation
1. Decide the location of NVR. It is suggested to place the NVR at the center of monitoring area. Avoid
any avoidable obstacle between the cameras and the NVR.
1) When there is no obstacle, cameras can be mounted about 60m away from the NVR (approx.
200ft);
2) When there is one wall in between, reduce the distance to 30m (approx. 100ft);
3) When there are 2 walls in between, reduce the distance to 15m (approx. 50ft);
4) When there are more than 2 walls between camera and NVR, we suggest using extendable
antennas to bring camera’s antenna inside walls while leaving camera out; or use network cable to
hard wire the camera to NVR.
* (The Wi-Fi range mentioned above vary in different environments; data only for reference)
2. Test the system before installation.
1) Connect the NVR to a standalone monitor or TV via VGA or HDMI;
2) Screw on antennas for NVR and plug it to power with included 12V 3A power adapter;
3) Screw on antennas for cameras and plug cameras to power with included 12V 1A power
adapters;
4) If you see videos from all cameras on monitor within minutes, you can go ahead to mount the

Wireless NVR System User Manual
10
cameras to where you want. If not, please follow step 4.3.2 to add the camera to system or contact
xmartO support at [email protected]om.
3.4 Camera Mounting Spots
1. Mount the cameras anywhere within the Wi-Fi range, plug them to power with included power
adapters (smaller ones are for cameras).
2. The cameras should start to stream videos to NVR within 1 minute.
3. If it does not display video on the NVR’s screen, the distance should be too long or there are too
many obstacles. Please move the cameras closer to the NVR.
3.5 Antenna Mounting Tips
Image 5 Image 6
The NVR’s antennas radiate signals to all around. The signal pick-up is best while antennas are on
same height and parallel. If the cameras cannot be at same height with NVR, please keep their
antennas parallel.
Suggestions to get better WiFi connection between cameras and NVR:
http://www.xmarto.com/helpcenter/?/article/1
Wrong
Correct

Wireless NVR System User Manual
11
4. System Operation Introduction
4.1 Starting up/ Login/ Logout/ Reboot/ Close screen display/ Shutdown
4.1.1 Starting up
Note:
·Please ensure the power input voltage fit the NVR’s requirements and the NVR has correct ground
connection.
·Unstable power source may cause unstable working status or even damage the NVR. If you have
unstable power source in your area, please use voltage-stabilized power source.
Tips:
·Before power on the NVR, please connect the NVR to a monitor or TV.
Steps of starting up the system:
1. Connect NVR to a standalone monitor/TV via VGA or HDMI. (Laptop cannot be used as a monitor.)
2. Plug NVR to power, the power indicator on NVR front panel should light up and
you’ll hear a beep.
3. If monitor is getting video output from NVR, you should see the starting page as
shown in Image 7. If not, please check connection.
Note: If you cannot get any display on TV, please check here
http://www.xmarto.com/helpcenter/?/question/11 or contact xmartO support.
Image 7

Wireless NVR System User Manual
12
4.1.2 Login
After system initialized, the system will pop out below login interface. Users must log in to do further
operations.
Image 8
Operation Steps:
1. Type in username. Default username is admin.
2. Type in password. Default password is empty, means no password, leave it blank.
3. Click “OK”, you shall be logged in to the system.
Tips:
·The password can be combined with numbers, letters or * #. The password length must be less
than 10.
4.1.3 Logout
If you want to log out while using the system, right click the mouse to pop out NVR main menu, click
“Exit System”, and then click “Logout”. As shown in Image 9.
Image 9
If you want the system to auto logout, please go to “System setting” – “General setting”, enable the
“Auto Logout”, click “Apply” to save this setting. System will auto logout if there is no operation
within 1 minute. Username and password will be required for next login.

Wireless NVR System User Manual
13
4.1.4 System Reboot
If you want to reboot the system while using it, right click the mouse to pop out NVR main menu,
click “Exit System”, and then click “Reboot”. System will reboot immediately.
4.1.5 Close screen display
If you want to close the screen display while using it, please right click the mouse to pop out NVR
main menu, click “Exit System”, and then click “Close screen display”. System will stop displaying on
screen. Double click the left button of your mouse will get it back.
4.1.6 System Shutdown
If you want to shut down the system, please right click your mouse to pop out NVR main menu, click
“Exit System”, and then click “Shutdown”. System will release power and pop out message “Now you
can power off the device”. Unplug your NVR from power, and the system will shut down immediately.
4.2 Setup Guide
When you succeed login the system, it will enter Setup Guide automatically, and guide you to do
basic settings. You can also right click your mouse or click “Cancel”, then click “Yes” to skip the
settings.
Operation Steps:
Setup Guide (Image 10): If you don’t want to go through these settings again when system reboots,
please keep “Enable Setup Guide When System Reboot” unchecked.
Image 10

Wireless NVR System User Manual
14
General setting (Image 11): Allows you to set your NVR’s time zone, date and time, language, and
keypad type. Click “Next” to continue after finish your settings.
Image 11
Network setting (Image 12):
Allows users to connect the NVR to Internet for remote access.
Users can either check DHCP to allow NVR obtain IP address from router automatically, or manually
set the NVR’s IP Address, Gateway, Subnet Mask, PPPoE, etc. Setting interfaces are shown in image 12
and image 13.
Image 12
Check DHCP, your NVR will obtain IP address from router automatically.
Uncheck DHCP, you can manually assign an IP address for your NVR.

Wireless NVR System User Manual
15
Image 13
HDD Setting (Image 14): It displays list of current hard drives, including the hard drive model, capacity,
used, status and format status. Hard drive needs to be formatted to start recording.
To format the hard drive, select it and click “Format”. It will take some seconds to format the hard
drive.
When hard drive is successfully formatted, the status will show ‘Formatted’. (You will lose all data on
the hard drive if you format it. So please make sure to back up the data before formatting your hard
drive.)
Image 14

Wireless NVR System User Manual
16
4.3 Device Manage
Manage your cameras’ connections with the NVR. In Device Manage interface, you can add new
cameras to NVR, re-pair cameras that lost connection to NVR again, delete cameras from their
current channels and re-pair.
4.3.1 Search Device
Function: Search wireless IP cameras in Lan.
Operation Steps: Right click the mouse to pop out NVR main menu, then click Device Manage, you’ll
see below interface, as shown in image 15. Click “Refresh” at upper right to search wireless IP
cameras in Lan. Search results will show in upper box.
Image 15
4.3.2 Add Device
4.3.2.1 Match Code
Function: Add cameras to NVR and configure them to work wirelessly.
The main function of “Match Code” is to pair the IP cameras to NVR, transmit NVR’s WiFi hotpot and
password to IP cameras, thus IP cameras connect to NVR automatically and transmit the video signals
to NVR wirelessly.

Wireless NVR System User Manual
17
When use Match Code:
a. Add new add-on camera to your xmartO system
b. Re-pair camera to NVR when they lose connection. You’ll need to delete the Network
Unreachable channel first, then re-pair the camera to an unoccupied channel. (Unoccupied
channel always shows No Video Source under Status.)
Note: IP cameras in pre-packed kits have already been paired to NVR. So cameras will auto connect to
NVR once they are plugged in power.
Operation Steps: http://www.xmarto.com/helpcenter/?/article/9
1) Connect the camera to your NVR’s Ethernet port with a network cable. Plug the camera to
power. The Ethernet port at the end of camera will blink, as shown in image 16.
Image 16
2) Right click your mouse to pop out NVR main menu, then click Device Manage. Click “Refresh”
on upper right and wait for a moment, you’ll see the camera displays in upper box. As shown
in image 18.
3) Select the camera from upper box, and select an unoccupied channel from bottom box, click
“Match Code”. Wait for the system to pair, once finish, you should see the camera display
video on your monitor. You can then disconnect camera from NVR and move it to anywhere
you want. When it gets power, it will automatically connect to NVR and display on monitor.
(Camera needs to be in the NVR’s Wi-Fi range)

Wireless NVR System User Manual
18
Image 17 Image 18
Note:
Connect Success: Camera is paired to NVR successfully; you should be able to see the camera
video on your monitor.
No Video Source: Unoccupied channel, no camera is paired to this channel, you can pair a new
camera to this channel.
IPC Disconnect: Camera is paired to NVR but not connected successfully.
4.3.2.2 Auto Add
Function: Find all cameras back quickly after upgrade NVR firmware, or configure camera to work
wired with NVR.
Add One is different from Match Code. Match Code configures the cameras to connect with NVR
wirelessly, while Add One configures the cameras to work wired with NVR.
When use Auto Add：
a. If some of the cameras’ mounting spots are out of WiFi range, you need to wired connect
cameras to NVR to get image.
b. After upgrade NVR firmware, you can use Auto Add to find all cameras back.
Configure the camera to work wired：
1）Right click the mouse to pop out NVR main menu, click “Device Manage” to enter Device Manage
interface. Delete the camera from its current channel by select the channel and click “Delete”.
2）Connect camera to NVR with network cable, plug camera to power, click “Refresh” on upper right,

Wireless NVR System User Manual
19
you’ll see the camera show in upper box.
3）Select the camera, and select the unoccupied channel, click “Add One”, wait for the system to
complete pairing. Once successfully paired, camera will display video when wired connect to NVR.
Find all cameras back after upgrade NVR firmware:
1) Right click the mouse to pop out NVR main menu, then click “Device Manage”. You’ll see all the
cameras show in upper box. As shown in image 19.
2) Click “Auto Add”, you’ll then see all cameras are added to NVR and all of them are displaying video
on monitor.
Image 19
Tips:
If you want the camera to work wirelessly, use Match Code to add camera to NVR.
If you want the camera to work wired, use Auto Add. This requires you hard wire the cameras to
NVR/router to get it work.
4.3.3 Modify Device
Function: Modify camera information.
Operation Steps:
1) Right click the mouse to pop out NVR main menu, then click Device Manage to enter the interface.
Select a camera in upper box and click Modify, you’ll see below interface, as shown in image 20.
2) You can set the camera information here. Click OK to save the settings and exit.