xMount Car&Home User manual

xMount@Operang instrucons
www.xmount.de
Holds your iPad!

xMount@Car&Home
• RemovexMountfromthepackaging.
• FastenxMountatthefasteningsystemselectedby
youwiththecatchmechanismclickingintoplace.
• BeforeusingxMount,pleasecheckwhetherthe
fasteningsystemhasclickedintoplacecorrectly.
• Youmustnoceahearableclick.
• ForfasteningyourxMountCar&Homeatthe
intendedsurfacepleaseusetheenclosedsucon
connector.
• Moreover,pleaseabsolutelyensurethefastening
surfaceiscleanandfreefromgrease,thissurface
isrequiredtobecleanedevery24hours.
• Usingtheposterioradjusngscrewyoucanindivi-
duallyadjusttheinclinaonangleofyourxMount.
• Usingtheanterioradjusngscrewyoucanturnthe
towerbaseby360degrees.
• Beforeusage,theseadjusngscrewsarerequired
tobeghtened.

xMount@Car for the headrest
BenjaminHermannHandelsUG
Mühlweg12c.61169Friedberg
+49(0)6031-6728106
[e-mail]
Contact:
www.xmount.de
• RemovexMountfromthepackaging.
• FastenxMountatthefasteningsystemselectedby
youwiththecatchmechanismclickingintoplace.
• BeforeusingxMount,pleasecheckwhetherthe
fasteningsystemhasclickedintoplacecorrectly.
• Youmustnoceahearableclick.
• FastenxMountCarattheheadrestsofthedriver
orpassengerseat.
• Forthispurpose,loosethefourscrewsofthe
holderandremovethecover.
• Inserttherodoftheheadrestintotherecessof
theholderandfastenitusingthecoverandthe
fourenclosedscrews.
• Ensureforarmstabilityoftheholder.Bendthe
gooseneckaccordingtoyourrequests.

xMount@Air
• RemovexMountfromthepackaging.
• FastenxMountatthefasteningsystemselectedby
youwiththecatchmechanismclickingintoplace.
• BeforeusingxMount,pleasecheckwhetherthe
fasteningsystemhasclickedintoplacecorrectly.
• Youmustnoceahearableclick.
• FastenxMountCarforvenlaonatthecentreof
thedoublelamellaofthecentreconsole.Clickthe
clampsintothelamellaandensureeverythingis
properlysecuredandxed.
• Forthestabilizaonoftheholderpleaseadjustthe
hingeonthebacksideoftheholderaccordingto
yourrequest.
• Usingtheposterioradjusngscrewyoucanindi-
viduallyadjusttheinclinaonangleofxMountas
wellasthetowerbasewhichisturnableby360
degrees.
• Beforeusage,theseadjusngscrewsarerequired
tobeghtened.

xMount@Tube/Bike
BenjaminHermannHandelsUG
Mühlweg12c.61169Friedberg
+49(0)6031-6728106
[e-mail]
Contact:
www.xmount.de
• RemovexMountfromthepackaging.
• FastenxMountatthefasteningsystemselectedby
youwiththecatchmechanismclickingintoplace.
• BeforeusingxMount,pleasecheckwhetherthe
fasteningsystemhasclickedintoplacecorrectly.
• Youmustnoceahearableclick.
• FastenxMountTubebylooseningthetwolateral
screwsoftheholder.
• Placetherubberpadsdependingonthetube
thicknessaroundthetubewheretofastenthe
mount.Atleastonepadisrequiredtobeused.
Thispadprotectsthemountagainstslipping.
• NowdeterminewhethertofastentheiPadver-
callyorhorizontallybylooseningthescrewinthe
centreofthefasteninganddeningtheposion.
Tightenthisscrewagainnow.
• Nowfastenbothhalfshellsusingthelateral
screws.Checkforanaccuratestabiity.