xMount Desk Secure User manual

xMount@Desk Secure
Operang instrucons
www.xmount.de
Holds your iPad!

xMount@Desk Secure
Remove xMount Desk Secure from the packaging.
xMount Desk Secure has been delivered to you in
pre-assembled condion. Drill a hole on the mounng
surface for cable lead-through. Now screw xMount
Desk Secure ghtly using wooden screws. Now remove
part 1 and push the iPad into the mount with the home
buon downwards. Lock the iPad now using part 1 and
a qualied lock.
For adjusng the ball joint according to your request
• remove the centred cover of the holder.
• remove the M 4 cap nuts on the back side.
• remove all cross-head screws.
• remove the holder with parts 2 and 3 now.
• remove the locking plate by switching it.
• Underneath, you will nd the adjusng screw.
• During assembly, please pay aenon to the op-
mal choice of the screws.
• Screw M 4x20 screws in the threads top right and
boom le, M 4x10 screws top le and boom
right.
• Screw the cap nuts in place on the back side of the
holder now.
• Now push the iPad into the holder with the home
buon downwards.

Benjamin Hermann Handels UG
Mühlweg 12 c . 61169 Friedberg
+49 (0) 6 031 - 67 28 106
[e-mail]
Contact:
www.xmount.de
Conversion An App Stop
• Take the iPad out of the holder.
• Remove the centred cover of the holder.
• Remove the M 4 cap nuts on the back side.
• Remove all cross-head screws.
• Remove the holder with parts 2 and 3 now.
• Now exchange part 2 for part 4 and reassemble
the parts in the sequence xMount Basis part 2 part
4.
• In this process, please pay aenon to the opmal
choice of the screws. Screw M 4x20 screws in the
treads top right and boom le, M 4x10 screws
top le and boom right.
• Screw the cap nuts in place on the back side of the
holder now.
• Now push the iPad into the holder with the home
buon downwards.
• Now lock it up with part 1 and a qualied lock.

Benjamin Hermann Handels UG
Mühlweg 12 c . 61169 Friedberg
+49 (0) 6 031 - 67 28 106
[e-mail]
Contact:
www.xmount.de
xMount@Safety instrucons
Safety instrucons
of Benjamin Hermann Handels UG for iPad holders.
The following safety instrucons shall be absolutely observed.
Please only apply this product in its intended manner.
Any use other than for this purpose may parcularly involve damages to the product or its
environment. A strong solar irradiaon may aect the funcon of the product. For addional
technical data and general informaon please refer to the product on our homepage
www.xmount.de
General informaon
The product must not be used during driving. When fastening the product in the vehicle
please ensure the eld of view not being restricted and comply with the StvZO (Road Trac
Licensing Regulaons) here.
The product is provided for a temperature range between minus ten to plus sixty degrees
Celsius. The sucon cup mounts are only suitable for a temporary mounng on a smooth
and clean surface. Before ulizaon please make sure the mounng surface is clean and free
from grease. Bike mounts have a speed limitaon of 20 km/h. Non-observance may cause the
mount or the device to be mounted becoming loose and geng damaged. Subsequent dama-
ge caused by devices fallen down cannot be excluded. Moreover, your device may probably
get scratched on the back side. Please exclusively use the parts delivered for mounng. Never
carry any oor stand at the tube since this may involve damages. All screws shall be ghtened
with not more than 10 newtons. Kindly keep these safety instrucons and further documents
together with your device. Should you hand over this product to third pares, please also
hand over the overall documentaon.
Cleaning
For cleaning, please do not apply any cleaning sprays or soluons of any kind that include
alcohol or other inammable liquids.
Repair
Repair work at the product shall be exclusively carried out by professionals. Unauthorized
opening and inappropriate repair work may involve considerable danger for the user (parcu-
larly the risk of funconal disorders, loose parts, re hazard).
Prevenve measures for children
For the avoidance of injuries, please make sure children, parcularly infants, do not get in con-
tact with the following devices and objects. Small parts of the device, accumulators, baeries,
screws, cables and packaging material (e.g. plasc bags) may be swallowed.
Transport and safekeeping
Please protect the product parcularly against shocks, impuries, strong solar irradiaon,
humidity and electrostac charge. Do not drop the device and do not expose it to any intense
vibraons.

Benjamin Hermann Handels UG
Mühlweg 12 c . 61169 Friedberg
+49 (0) 6 031 - 67 28 106
[e-mail]
Contact:
www.xmount.de
xMount@Safety instrucons
External power supply
For power supply of the product, you are allowed to exclusively use the dened accumula-
tor and the supplied adapter. You will nd further informaon about this in the operang
instrucons of the product. Please only use adapters and accumulators released for your
product. When connecng and disconnecng the cables please observe the informaon in the
operang instrucons of the product. Adapters used in vehicles may be exclusively operated
under the supervision of adults. If the product is switched on, please do not keep it in an
environment with a poor air circulaon. Otherwise, this may parcularly cause damages to
the product or even re. Please do not keep charging devices, adapters, accumulators and
baeries near a source of heat. Excessive heat may cause the charging device and adapter cat-
ching re. Please disconnect them from the power supply if not supervised by adults. Please
make sure the contacts of your power socket are clean. Adapters may get very hot. Never hide
the venlaon slots of the adapter. Do not use damaged cables, otherwise there is the risk of
an electric shock or re.
Posioning and operaon
Mount the product to such an extent that it cannot cause any injury neither in the range of an
airbag nor in the event of an accident, parcularly not in the impact area of the head or body.
Usually, the products are designed for being mounted at the screen, at the air grid or at the
headrests. For products with electrical supply please pay aenon to the following:
Lay the cables in a manner that they do not cause any danger (risk of stumbling) and are not
damaged. When connecng the cables please pay aenon to the corresponding informaon
in the operang instrucons of the product. The assembly of the product and also the assem-
bly of accessory parts must by no means impede the driver during driving the vehicle. Do not
operate, mount or adjust this or other products during driving. During driving, please to not
reach for or look for objects that have fallen down.
An-the system
The xMount an-the system is construed for simple the (removal). It cannot withstand
the aempts by tools and brute force. For the an-the protecon, please exclusively use
locks of the brand Burgwächter C-Line 220-20 with a diameter of 11 mm in order to avoid the
mount sliding on. Moreover, the device comes with an addional cover that is required to be
used.
Aenon
No liability is assumed for damages resulng from misuse of the product or non-observance
of the safety instrucons.