xMount Wall Secure User manual

xMount@Wall Secure
Operang instrucons
www.xmount.de
Holds your iPad!

xMount@Wall Secure
Remove the holder from the packaging.
xMount Wall Secure is already pre-assembled by the
factory.
For fastening, please screw xMount Wall Secure ghtly
in place at a suitable surface.
For adjusng the ball joint according to your request
• remove the centred cover of the holder.
• remove the M 4 cap nuts on the back side.
• remove all cross-head screws.
• remove the holder with parts 2 and 3 now.
• remove the locking plate by switching it.
• Underneath, you will nd the adjusng screw.
• During assembly, please pay aenon to the op-
mal choice of the screws.
• Screw M 4x20 screws in the threads top right and
boom le, M 4x10 screws top le and boom
right.
• Screw the cap nuts in place on the back side of the
holder now.
• Now push the iPad into the holder with the home
buon downwards.
• Verschliessen Sie diesen nun mit Teil 1 und einem
qualizierten Schloss.

Benjamin Hermann Handels UG
Mühlweg 12 c . 61169 Friedberg
+49 (0) 6 031 - 67 28 106
[e-mail]
Contact:
www.xmount.de
Conversion An App Stop
• Take the iPad out of the holder.
• Remove the centred cover of the holder.
• Remove the M 4 cap nuts on the back side.
• Remove all cross-head screws.
• Remove the holder with parts 2 and 3 now.
• Now exchange part 2 for part 4 and reassemble
the parts in the sequence xMount Basis part 2 part
4.
• In this process, please pay aenon to the opmal
choice of the screws. Screw M 4x20 screws in the
treads top right and boom le, M 4x10 screws
top le and boom right.
• Screw the cap nuts in place on the back side of the
holder now.
• Now push the iPad into the holder with the home
buon downwards.
• Now lock it up with part 1 and a qualied lock.

Benjamin Hermann Handels UG
Mühlweg 12 c . 61169 Friedberg
+49 (0) 6 031 - 67 28 106
[e-mail]
Contact:
www.xmount.de
xMount@Safety instrucons
External power supply
For power supply of the product, you are allowed to exclusively use the dened accumulator
and the supplied adapter. You will nd further informaon about this in the operang instruc-
ons of the product. Please only use adapters and accumulators released for your product.
When connecng and disconnecng the cables please observe the informaon in the operang
instrucons of the product. Adapters used in vehicles may be exclusively operated under the
supervision of adults. If the product is switched on, please do not keep it in an environment with
a poor air circulaon. Otherwise, this may parcularly cause damages to the product or even re.
Please do not keep charging devices, adapters, accumulators and baeries near a source of heat.
Excessive heat may cause the charging device and adapter catching re. Please disconnect them
from the power supply if not supervised by adults. Please make sure the contacts of your power
socket are clean. Adapters may get very hot. Never hide the venlaon slots of the adapter. Do
not use damaged cables, otherwise there is the risk of an electric shock or re.
Posioning and operaon
Mount the product to such an extent that it cannot cause any injury neither in the range of an
airbag nor in the event of an accident, parcularly not in the impact area of the head or body.
Usually, the products are designed for being mounted at the screen, at the air grid or at the
headrests. For products with electrical supply please pay aenon to the following:
Lay the cables in a manner that they do not cause any danger (risk of stumbling) and are not
damaged. When connecng the cables please pay aenon to the corresponding informaon in
the operang instrucons of the product. The assembly of the product and also the assembly of
accessory parts must by no means impede the driver during driving the vehicle. Do not operate,
mount or adjust this or other products during driving. During driving, please to not reach for or
look for objects that have fallen down.
An-the system
The xMount an-the system is construed for simple the (removal). It cannot withstand the
aempts by tools and brute force. For the an-the protecon, please exclusively use locks of
the brand Burgwächter C-Line 220-20 with a diameter of 11 mm in order to avoid the mount
sliding on. Moreover, the device comes with an addional cover that is required to be used.
Aenon
No liability is assumed for damages resulng from misuse of the product or non-observance of
the safety instrucons.

xMount@Safety instrucons
External power supply
For power supply of the product, you are allowed to exclusively use the dened accumula-
tor and the supplied adapter. You will nd further informaon about this in the operang
instrucons of the product. Please only use adapters and accumulators released for your
product. When connecng and disconnecng the cables please observe the informaon
in the operang instrucons of the product. Adapters used in vehicles may be exclusively
operated under the supervision of adults. If the product is switched on, please do not keep it
in an environment with a poor air circulaon. Otherwise, this may parcularly cause damages
to the product or even re. Please do not keep charging devices, adapters, accumulators and
baeries near a source of heat. Excessive heat may cause the charging device and adapter
catching re. Please disconnect them from the power supply if not supervised by adults.
Please make sure the contacts of your power socket are clean. Adapters may get very hot.
Never hide the venlaon slots of the adapter. Do not use damaged cables, otherwise there
is the risk of an electric shock or re.
Posioning and operaon
Mount the product to such an extent that it cannot cause any injury neither in the range of
an airbag nor in the event of an accident, parcularly not in the impact area of the head or
body. Usually, the products are designed for being mounted at the screen, at the air grid or at
the headrests. For products with electrical supply please pay aenon to the following:
Lay the cables in a manner that they do not cause any danger (risk of stumbling) and are not
damaged. When connecng the cables please pay aenon to the corresponding informa-
on in the operang instrucons of the product. The assembly of the product and also the
assembly of accessory parts must by no means impede the driver during driving the vehicle.
Do not operate, mount or adjust this or other products during driving. During driving, please
to not reach for or look for objects that have fallen down.
An-the system
The xMount an-the system is construed for simple the (removal). It cannot withstand
the aempts by tools and brute force. For the an-the protecon, please exclusively use
locks of the brand Burgwächter C-Line 220-20 with a diameter of 11 mm in order to avoid the
mount sliding on. Moreover, the device comes with an addional cover that is required to be
used.
Aenon
No liability is assumed for damages resulng from misuse of the product or non-observance
of the safety instrucons.
Benjamin Hermann Handels UG
Mühlweg 12 c . 61169 Friedberg
+49 (0) 6 031 - 67 28 106
[e-mail]
Contact:
www.xmount.de