XPOtool 61312 User manual

User’s manual
Motorcycle Dolly
61312
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.

https://www.XPOtool.com Item 61312 Page 2
The Tool Experts
04 2022-1
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]

https://www.XPOtool.com Item 61312 Page 3
The Tool Experts
04 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
1. Before commissioning the device, absolutely read the user’s manual completely and train oper-
ation before the first use with a motorcycle.
2. By no means, try to increase the capacity of the dolly.
3. Place the dolly on a level and solid surface.
Assembly
1. First fix the castors (see Fig.).
2. Adapt the length of the connecting rail to the distance of the rear wheel and lateral upright of
your motorcycle. Four extension levels are available.

https://www.XPOtool.com Item 61312 Page 4
The Tool Experts
04 2022-1
Operation
1. After assembly, place the dolly on a level surface and the motorcycle on the dolly by placing the
rear wheel onto the rear wheel support and the lateral upright on the corresponding support.
2. Push or pull the handlebar of the motorcycle depending on the direction that you wish to move
it.
3. Lock the castors after arriving at the destination point.
Technical specifications
Max. charge capacity (㎏)
approx. 560
Size (㎜)
1450 × 700 × 120
Distance rear wheel–lateral upright (㎜)
750–1200
Weight (㎏)
21
Material
Steel
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.