XPower M-25B User manual

Rechargeable Ozone Air Purier Owner's Manual
Model :
M-25B
(115V 60HZ)
Read and save these instructions before use
www.xpower.com | 1-(855)-855-8868 | [e-mail]
Index: NA-1-A32
Edition: 3.3.Final

English - 2
Safety Instructions
!WARNING - READ AND SAVE THIS INSTRUCTIONS BEFORE USING THIS PRODUCT.
The user of electrical products may create hazards that include, but are not limited to
injury, fire, electrical shock. Failure to follow these instructions may damage and/or
impair its operation and void the warranty.
• Before operating, remove all packaging material and check for any damage that may
have occurred during shipping or any missing items.
• Check household power supply to ensure it matches the appliance’s specification.
• DO NOT operate any fan with a damaged cord or plug. Discard fan or return it to an
authorized service facility for examination and/or repair.
• Use only on GFCI protected receptacles. Please contact a qualified electrician for
verification and / or installation of a GFCI receptacle if necessary.
• DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or
similar coverings. DO NOT route cord under furniture or appliances. Arrange cord away
from traffic area and where it will not be tripped over.
• To reduce the risk of fire or electric shock, do not use this fan with any solid-state
speed control device.
• DO NOT touch this appliance or the plug with wet hands or while standing in water.
• DO NOT operate the appliance in any pooled water.
• DO NOT use the product in areas where gasoline, paint or other flammable goods and
objects are used or stored.
• DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may
damage the appliance and void the warranty.
• DO NOT cover the air inlet or outlet on the appliance.
• DO NOT direct the air flow at human faces or bodies.
• DO NOT allow children to play with this appliance.
• AUTOMATICALLY OPERATED DEVICE – To reduce the risk of injury, disconnect from
power supply before servicing.
• Remove the power cord from the electrical receptacle by grasping and pulling on the
power cord plug-end only, DO NOT pull the cord directly.
• DO NOT attempt to repair or adjust any electrical or mechanical functions of this
appliance, as this may cause danger and void the warranty.
• If the appliance is damaged or it malfunctions, DO NOT continue to use it. Unplug the
product from the electrical outlet. Refer to troubleshooting guide or contact XPOWER.
• Store in a dry area, away from exposure to sunlight, extreme temperature and humidity,
or other extreme environments, when not in use.
• DO NOT disassemble the battery. If the machine or battery malfunctions, refer to the
Troubleshooting Guide.
• WARNING: DO NOT use the ozone function of this product in the space where people
or living bodies are present. DO NOT enter the space where the ozone has performed

English - 3
Items Included
Axial Fan Owner's Manual
XXXManual De Usuario (página 10)
XXXMode d'emploi (page 18)
Model / Modelo / Modèle:
P-80Series, P-100 Series, P-200 Series
(115V 60HZ)
Readand save these instructions before use
Leay guarde estas instrucciones antes de usar la unidad
Lireet conserver ces instructions avant utilisation
www.xpower.com| 1-(855)-8868 | [email protected]
Index:NA-1-A2
Edition:1.0.Alpha
• Owner’s Manual x 1
• Rechargeable Ozone
Air Purifier x 1
Parts Description
Ozone
Generator
Speed Switch
Rack
Handle
Air Inlet
Grill
Rack
Handle
Air Outlet
Grill
Timer Switch
Battery
Case
Battery Indicator
Light
Ozone Switch
Ozone Indicator Light
before ozone degrades to a safe concentration level.
• DO NOT stack more than six units of this appliance.
• An electronic instruction manual can be obtained through manufacturer’s website
www.xpower.com.
• Charger x 1

English - 4
Operation Guide
Rechargeable Ozone Air Purier Introduction
• XPOWER Rechargeable Ozone Air Purifiers use high voltage
current to generate ozone from the oxygen in the air. It is
designed for air sanitization, disinfection and purification.
The unit also has auxiliary functions of ventilation and
drying.
• It is suitable for air purification and disinfection in various
commercial places, as well as various professional to
sanitizing applications.
Switch Plate
120
60
0
ON
180
OFF
MAX
LOW
Timer SwitchSpeed Switch
Ozone Switch
Ozone Indicator
Light
Battery Indicator
Light
Variable Speed Switch
• Turn to “OFF” position to switch the machine OFF. Turn clockwise to any
position between “MAX” and “LOW” to switch the machine ON.
• You can adjust to any desired speed variably. “MAX” is the highest speed and
“LOW” is the lowest speed.
Timer Switch
• Turn clockwise to set timer for minutes count down to an automatic stop.
• The timer can be set for up to 180 minutes (3 hours).
• When the timer reaches “0” position, the unit stops working. On “ON” position,
the fan remains in operation.

English - 5
Switch Plate (Continued)
Adjusting Operating Location / Position
• Different locations will have different circulation and ventilation.
Ozone Switch
• When the switch is in “0” position, the ozone function stays off.
• When the switch is in “I” position, the ozone function is on. If the fan is
functioning, then the ozone function will start; If the fan is off, or the timer
switch reaches “0” position, then the ozone function will stop.
• On “ON” position, it will stay connected with power.
Ozone Indicator Light
• When this light is blinking, it indicates that the ozone function is working.
Battery Indicator Light
• This light indicates the rest capacity of the battery.
Adjusting Operating Location / Position (Continued)
• The product features 360° rotation. Tilt the product to desired angle and screw
on rack handles to secure the fan’s position.

English - 6
Use environment
Usage Directions
WARNING:
• DO NOT use the ozone function of this product in the space where people or living
bodies are present.
• DO NOT use the product in areas where gasoline, paint or other flammable goods and
objects are used or stored.
• Use in a dry area, away from exposure to sunlight, extreme temperature and humidity,
or other extreme environments, when not in use.
Inlet and Outlet Orientation:
• Also pay attention to the orientation of the air inlet and air outlet. Make sure the airflow
won’t influence any object / livings nearby the unit.
Enclosed Area:
• For optimal efficiency, the ozone air purifiers must be operated in an enclosed area.
Keep all doors, windows and other outside entrances to the room closed. Turn off the
air conditioning.
Adjusting the Speed of the Fan:
• Connect the unit to power source.
• Turn the ozone switch to “O” position, and turn the timer switch to “ON” position.
• Turn on the unit, adjust the fan to designated speed position.
Operating the Unit:
• Turn the ozone switch to “I” position.
• Turn the timer switch to “180” position, or other designated position.
• Exit the room immediately and seal off the room.
Turning off the unit:
• After the timer runs out, DO NOT enter the room immediately. Wait until ozone
concentration reduces to safe levels.
• Turn the ozone switch to “0” position and turn the speed switch to “OFF” position.
• Turn the timer switch to “ON” position.
• Disconnect the unit from the power source.
• Ventilate the room fully.
Charge the Battery
• Connect the unit to the power source.
• When the battery is fully charged, all the bars of the battery indicator light will shine
green.
• IMPORTANT: Please charge the battery fully to activate the battery before initial use.
• IMPORTANT: To avoid the battery working on low capacity condition and encountering
permanent damage, it’s recommended to charge the battery fully before each usage.
• The unit will operate while charging; however, for safety, ozone function will be
disabeled.

English - 7
User Maintenance Instructions
It is recommended to maintain this product regularly. Failure to follow maintenance
guidelines may result in product failure and void the warranty. Before maintaining the
machine, be sure to disconnect the machine from the power source.
Cleaning the surface
• Wipe the surface of the housing with a damp cloth. Do not rinse the product directly
with water.
• Remove blockages from the air inlet and air outlet.
Storage
• When idle, please put this product into the matching plastic bag and put it in the
packing box. This will prevent damage from dust and humidity to the ozone generator.
• Store this product in a dry and cool room, avoid direct sunlight and chemicals, and
keep out of reach of children.
Organize the Power Cord
• Wrap the power cord around the housing.

English - 8
Troubleshooting Guide
PROBLEM POSSIBLE CAUSE SOLUTION
The unit does
not start
No electricity. Check for power supply.
The power cord is not
properly plugged in.
Remove and reconnect the power cord.
Battery is not activated
yet.
Please charge the battery fully prior
to initial use. (See Page 6: Charge the
Battery)
Low battery capacity. When the battery capacity is 20% or
lower, in order to protect the battery, the
preset program will stop the machine and
prohibit the machine from working again.
(See Page 6: Charge the Battery)
Unit runs but
the speed or
the sound is
abnormal
Air inlet or air outlet is
blocked.
Remove blockage.
Low battery capacity. See Page 6: Charge the Battery.
Unit runs but
no ozone is
produced out
The ozone switch is off. Flip on the ozone switch.
The ozone generator is
damaged.
Contact XPOWER or other parties
authorized by XPOWER for further
instructions.

English - 9
Technical Specication
MODEL NUMBER M-25B
Charger Input
Specification
100-240 V~, 50/60Hz
2.5 A
Charger Output
Specification DC 25.2 V / 3.8 A
Machine Output
Power 90 W
Rated Airflow 1200 CFM
Speed Control Variable Speeds
Timer 3 hours (OFF)
Battery
Specification
Lithium Ion Battery
260 W·h
Run Duration
Max speed with Ozone ≈ 3 hours
Max speed without Ozone ≈ 8 hours
Ozone output 5.0 g/h
Charging
Duration Max 3 hours
Cord Length 10.0 ft. / 3.0 m
Housing ABS
Unit Dimension
(L) x (W) x (H)
15.4 x 8.8 x 17.2 in. /
39.1 x 22.4 x 43.7 cm
Unit Weight 13.5 lbs. / 6.1 kg
If your product(s) is not listed above, please visit www.xpower.com for more information.

English - 10
XPOWER Limited Warranty (USA)
1 YEAR LIMITED WARRANTY
XPOWER-branded products purchased in the U.S. from authorized distributors include
a 1-year limited warranty. Contact XPOWER to confirm warranty information about your
product(s).
This limited warranty covers defects in materials and workmanship in your XPOWER-
branded products, purchased in the U.S. ONLY. Local warranty policy (if any) in your
country will cover products purchased outside the U.S.
Items mentioned but not limited to below are not covered by warranty:
(1) Power cord, filters or any other components considered as a “consumable parts” by
XPOWER.
(2) Normal wear and tear.
(3) Problems that result, directly or indirectly, at XPOWER’s sole discretion, from:
(3.1) External causes such as accident, abuse, misuse or problems with electrical power
supply.
(3.2) Disassembling, servicing or modification not authorized by XPOWER.
(3.3) Usage that is not accordant with product instructions stated in Owner’s Manual.
(3.4) Failure to follow the product instructions or lack of necessary maintenance stated
in Owner’s Manual.
Before contacting XPOWER, please try one or more of the following:
(1) Consult this Owner’s Manual and follow the instructions of troubleshooting guide.
(2) Access www.xpower.com for more advice and information that could be helpful to
address your problems.
If you need additional assistance from XPOWER, please:
(1) Email [e-mail].
(2) Call XPOWER U.S. Customer Service Department at 855-855-8868 or other numbers
provided on www.xpower.com.
(3) Visit XPOWER U.S. Head Office at 668 S. 6th Ave.,City of Industry, CA 91746 USA or the
most current address provided on www.xpower.com.
Please also have your original proof of purchase and the serial number(s) of your
product(s) ready when you contact XPOWER.
IMPORTANT:
(1) Please finish the online warranty registration before usage. Visit https://xpower.
com/warranty-registration/
(2) This Limited Warranty applies with its own timeliness. Contact XPOWER or visit
www.xpower.com for more information.
!

English - 11
If you are instructed to return the unit for service or replacement, please:
(1) Request a RMA (Return-Merchandise-Authorization) number.
(2) Use the original or an equivalent packaging, prepay shipping charges at your own
expense to the address provided by XPOWER, with the RMA number on the shipping
label or the packaging.
(3) Include all the original parts and components.
XPOWER will inspect, assess and advise the repairs needed and applicable cost, if any.
For products under warranty, we will pay to ship the repaired or replaced product(s) to
you if you use an address within the Contiguous United States. Otherwise, we will ship
the product(s) to you at your own expense.
XPOWER Limited Warranty (USA)

Read and save these instructions before use
www.xpower.com | 1-(855)-855-8868 | [e-mail]
668 S. 6th Ave.,
City of Industry, CA 91746 USA
Index: NA-1-A32
Edition: 3.3.Final
XPOWER Manufacture, INC.