XPPen Artist 24 User manual

Quick Guide
Artist 22 Pen Display (2nd Gen)
Artist 24 Pen Display
www.xp-pen.com
[e-mail]
XPPEN TECHNOLOGY CO.

PAGE1 PAGE2
英语
I. Product overview
1. HDMI connection: Connect the pen display to your computer via the HDMI
and USB-A to USB-C Cable. Then connect the power jack to the adapter
connected to the wall outlet.
2. USB-C connection (Only full-featured USB-C port): Connect the pen display
to your computer with a USB-C cable. Then connect the power jack
to the adapter connected to the wall outlet.
1. Display/Active area
2. Back key
3. Brightness down
4. Brightness up
5. Menu/OK
6. Power switch (Please press and hold it for about 3 seconds to turn on)
7. Power LED (White)
a. Always On: When the pen display is connected to the computer and
the power supply is switched on, the indicator will be on.
b. Flashing: When the power supply of the pen display is turned on, but
no signal is received from the computer.
c. Off: When the power supply of the pen display is turned off.
8. Headphone port
9. HDMI port
10. USB-C port
11. Power jack
II. Connection
Quick Guide
Artist 22 Pen Display (2nd Gen)
Artist 24 Pen Display
1
8
9
10
11
2 3 4 5 6 7
Image 1-1
HDMI connection mode
USB-C connection mode
* The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks
or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other
countries.

繁中
PAGE3
If you need any further assistance, please contact us:
[e-mail]
www.xp-pen.com
Note:
For the best performance of your device, we highly recommend you check and
update driver regularly from XP-PEN website.
III. Download and Install the Driver
1. Make sure your pen display is connected correctly to the computer.
2. Visit the XP-PEN website (www.xp-pen.com), click on the Support section and
then Download. Choose a product model and download the latest driver
according to your computer system.
3. Follow the prompts to finish the driver installation.