XROCKER Legacy Adapter User manual

Digital to Analogue Audio Converter
Need Help?
www.xrockeruk.com/pages/support
IMPORTANT: You must keep your original retail receipt as proof of
purchase.
Legacy Adapter

2
Thank you for purchasing the X Rocker Legacy
Adapter!
This adapter will help you connect any X Rocker
gaming chair to any device that doesn’t support
analogue audio as standard.
This manual will outline the following connecon
possibilies. More can be found online at
www.XRockerNaon.co.uk also!
Welcome to X Rocker!
Table of contents
3Box contents
4 Connecon Guide: PS4™ and
PS4 Pro™ Systems
5 Connecon Guide: Xbox One™ Systems
6 Connecon Guide: TV (for all other consoles)
7 Connecng your X Rocker to the
Legacy adapter

3
1 - X Rocker Legacy Adapter
2 - Opcal Audio Cable
3 - USB Power Cable
3.28/1m
2.624/1.5m

4
OPTICAL
Connecng the Legacy Adapter
to PS4™/PS4 Pro™
Make sure the PS4™ System is switched OFF. Insert the USB
into the front of your PS4™ and the other end into the DAC
adapter. Remove the clear plasc ends of the opcal cable.
Connect one end to the SPDIF port on the DAC adapter and
then the other to the PS4™ system. Connect the audio cables
from your X Rocker gaming chair into the headphone socket
or RCA of the DAC and then follow the step below. Switch on
the PS4™ system.
On the main menu screen select (Sengs) > [Sound and
Screen] > [Audio Output Sengs] > [Primary Output Port]
and change this to [Digital Opcal]. Navigate the menu unl
you select [Done] and enjoy!
Back

5
Connecng the Legacy Adapter
to Xbox One™
Back
Make sure the Xbox One™ System is switched OFF. Insert the
USB into the front of your Xbox One™ and the other end into
the DAC adapter. Remove the clear plasc ends of the opcal
cable. Connect one end to the SPDIF port on the DAC adapter
and then the other to the Xbox One™ system.
Connect the audio cables from your X Rocker gaming chair
into the headphone socket or RCA of the DAC and then follow
the step below.
Switch on the Xbox One™ System. On the menu screen, select
(Sengs) > [All Sengs] > [Display and Sound] > [Audio
Output] > under [Digital Audio], Select [Opcal Audio] and
set it to [Stereo Uncompressed] Navigate the menu unl you
select [Done] and enjoy!

6
Connecng the Legacy Adapter
to a TV Set
SPDIF
Make sure that the TV set is switched OFF before connecng.
Remove the clear plasc covers from both ends of the
Opcalcable. Input one of end of the opcal cable into the
SPDIF socket on the legacy adapter. Connect the other end
to the SPDIF socket on your TV. Connect one end of the USB
cable into any available USB socket on your TV or alternave
device. Connect the round end into the Legacy adapter.
On your TV, navigate to the sengs menu, check for
[Audio Output] and switch this to [Digital Opcal Out]
Please note that this seng is dierent on each TV.
Please check your TV manual for full informaon on how to
switch over the sengs.

7
Connecng your X Rocker to
the Legacy Adapter
NB. RCA and 3.5mm audio cables supplied with X Rocker
gaming chair. For Wireless/Bluetooth models. Please make
sure the channel switch is set to AUX or OFF.

Need Help?
www.xrockeruk.com/pages/support
IMPORTANT: You must keep your
original retail receipt as proof of
purchase.