Xsarius Doorcam pro User manual

Doorcam pro

I. Product Appearance
II. Package Contents
III. Download the APP
IV. Register and Login
V. Operation Guide
VI. Function Description
VII. Common Problem
VIII. Specification
...........................................
..............................................
............................................
...........................................
................................................
........................................
...........................................
...................................................
3
3
4
4
5
10
11
12
Content
© Copyright 2020 - Xsarius

Lens
MIC
Bell button
Light-Sensitive Diode
LED Indicator
Smart PIR
Speaker
I. Reference
II. Package Contents
Video Door Bell Screw Kits Power Adaptor 0.5m USB Cable Operation Instruction
The images here are for reference only.
3

III. Download the APP
IV. Register and Login
1. Android user can search “XSARIUS” via App Market.
2. iOS user can search “XSARIUS” via App Store.
3. Android and iOS user can scan following QR code to download “XSARIUS”.
Open the “XSARIUS” APP, press “Fast Register” to register a new account.
If you have an account, you can log in with your account & password.
© Copyright 2020 - Xsarius

V. Operation Guide
1. Add device
Special reminder: Keep the doorbell, indoor unit and router as close as
possible (to avoid network failure caused by too far distance).
5
1After logging in, click the "+" button in
the upper right corner of the interface,
scan the device QR code to add.
2Push the Power On button, the
doorbell will turn on.

© Copyright 2020 - Xsarius
4If the red LED on the device flashes, it
indicates it is receiving the configuration
data from the device. Click Same status.
3Check the boot, the red light flashes,
and scan the QR code of the device.

7
5Input the WiFi name & password to
connect the device to WiFi hotspot,
click next.
6QR code will pop up in the screen of
mobile phone. Please put the QR code
in front of the camera at 15-20cm.
When you hear the voice, you can
confirm the success. Please click the
confirmation below.

© Copyright 2020 - Xsarius
8After successful binding, give the
device a name; click "Done". The APP
terminal interface will prompt: Device
added successfully.
7After confirming, it will notify that it is
connecting to the LAN, and then go to
the countdown interface.

2. How to pair and unpair the indoor unit with the doorbell
9
1
1
2
3
2
Pair : Plug the indoor unit into power and wait when the blue light is always
on , and then press the doorbell button, when the indoor unit ‘s blue light
turns to flash, then the pairing is completed. (you can switch the ringtone by
pressing music button on the indoor unit )
Unpair: Uplug the paired indoor unit and press and hold the volume button
then plug into the power again until the blue light is always on which indicates
the doorbell and indoor unit have been successfully unpaired.
Keep the doorbell, indoor unit and router as close as possible (to avoid
network failure due to too far).
The installation height of the doorbell is 1.2~1.5 meters.
It should be installed on non-metallic materials (to avoid signal shielding), and
it is recommended to stick it on the side wall of the door.
3. Camera Installation Method
Special Note:
1
2
Tear off the red 3M adhesive sticker at the bottom of the upper wall base,
and then paste the upper wall base on a smooth wall (such as glass, ceramic
tiles, latex wall paint, etc.)
Hang the doorbell from top to bottom on the base of the upper wall to
complete the installation.
Installation method 1: glue on the wall and fix it (recommended)
Note: The adhesive can only play 100% viscosity after 24 hours after it is glued.
2
1
Wall space
Base
Doorbell

VI. Function Description
© Copyright 2020 - Xsarius
123
1
2
3
Press against the back of the door bell, and push down to get the back cover.
Drill four pilot holes into the wall plate, and insert plastic plugs into holes.
Secure the back cover with screws.
Align the doorbell with four buckles, and push doorbell down to fix.
1. Definition: 1080P (1920*1080) super clear resolution, clear picture, delicate
and realistic.
2. Viewing angle: With a 142 ° large wide-angle lens, the view is wide, and the
whole family has a panoramic view.
3. Two-way audio: Bring you real-time intercom, to make the communication
easy.
4. Night vision: The camera will turn on the night vision function automatically
according to the ambient light. After opening, the screen will appear black and
white, indoor conditions are clearly visible in 7 meters.
5. Recording storage: support video recording and screenshots, support for
guest visits, automatic recording; visitors press the doorbell, will notify the phone,
will also automatically record video to the Micro SD card, you can view the visitor
record.
6. PIR motion detection: Send alert to your phone when visitor is at your front
door or when motion detection is triggered.
7. Instant alert: Get instant alerts when visitor presses the doorbell or when the
built-in motion sensor is triggered. You can watch real-time videos, intercom with
the visitor via your phone.
Installation method 2: Fix on the wall with screws

11
5G WiFi is not supported. Please make sure that the WiFi signal of the wireless
router connected to the camera is within the coverage.
1. Camera LED indicator and buzzer status:
2. Note: Make sure the camera is connected to WiFi in the
2.4GHz band.
When the camera is charging, a certain degree of fever will occur, which is
normal. Please rest assured. Applicable temperature range: -10°C to +50°C.
3. Is the camera fever normal?
• Do not install the doorbell on a metal door to avoid the metal door shielding the
doorbell WiFi signal.
• Please install the doorbell upright as far as possible to avoid a certain impact
on the video upright image after installation.
4. What are the things to be aware of when using the camera?
VII. Common Problem
Status
System startup
Waiting for distribution network
Scanning QR code
Scanning the QR code successfully
Connecting WiFi
Connect to WiFi successfully
Failed to connect WiFi
Reset success
PIR wake up
Wake up by doorbell
LED light
Red light flashes
Red light flashes
Red light flashes
Red light flashes
Red and blue alternately flashing
LED light is off
Red light flashes
Red light flashes
Blue light flashes
Blue light flashes
Buzzer
None
None
None
Di (short sound)
None
None
None
Di (short sound)
None
None

© Copyright 2020 - Xsarius
VIII. Specification
CAMERA
COMPRESSION
WiFi
INTERFACES
OTHERS
Image Sensor
Configuration
Resolution
Field of View (FOV)
Day & Night
Video Compression
WiFi Standards
Frequency Range
Channel Bandwidth
Safety
Operating Condition
Power Supply
Power Consumption
Size
Speed
Micro USB
Battery Compartments
Button
2.4G Antenna
PIR
TF Card Slot
2MP 1/2.9" CMOS
1920 × 1080 pixel
Horizontal 118°,vertical 61°,
Diagonal 142°
IRCUT automatic conversion
H.265
SD,HD,UHD
IEEE802.11b, 802.11g, 802.11n Draft
2.4 GHz ~ 2.4835 GHz
Supports 20MHz,40MHz
Video Compression Rate
11b: 11Mbps, 11g :54Mbps, 11n :150Mbps
*1/ DC 5V 2A Power Supply
*1/2 18650 size batteries Power Supply
Reset button, Doorbell button
*1/ Built-in 2.4G Antenna
*1
*1
Temperature: -10 °C to +50 °C
Humidity:< 95%
Micro USB 5V 2A/18650 Battery
2W
140*61*33.8mm
64/128-bit WEP, WPA/WPA2,
WPA-PSK/WPA2-PSK

I. Het product
II. Verpakkingsinhoud
III. Download de APP
IV. Registreren en Inloggen
V. Bedieningshandleiding
VI. Functiebeschrijving
VII. Vaak voorkomend probleem
VIII. Specification
...........................................................
.............................................
...............................................
...................................
......................................
........................................
............................
.....................................................
3
3
4
4
5
10
11
12
© Copyright 2020 - Xsarius
Inhoud

Lens
MIC
Bell-knop
Lichtgevoelige diode
LED-indicator
Slimme PIR
Spreker
I. Reference
II. Package Contents
De afbeeldingen zijn alleen ter referentie.
3
Video deurbel Schroevensets Voedings Adapter 0.5 USB Kabel Handleiding

III. Download de APP
IV. Registreren en Inloggen
Open de "XSARIUS" APP, druk dan op "Snel registreren" om een nieuw account
aan te maken. Als u al een account heeft, dan kunt u inloggen met de huidige
gegevens van uw account en wachtwoord.
© Copyright 2020 - Xsarius
1. Android-gebruikers kunnen zoeken naar “XSARIUS” via de Google Play Store
2. iOS-gebruikers kunnen zoeken naar “XSARIUS” via de App Store.
3. Android- en iOS-gebruikers kunnen de QR-code scannen om de app“XSARIUS”
te downloaden.

V. Bedieningshandleiding
1. Voeg apparaat toe
Speciale Herinnering: Houd de deurbel, chime en router zo dicht mogelijk bij elkaar
(om netwerkstoringen door een te grote afstand te voorkomen).
5
1Klik na het inloggen op de “+” knop in de
rechterbovenhoek van de user-interface,
scan de QR-code van het apparaat.
2Druk op de aan knop, de deurbel gaat
aan.

© Copyright 2020 - Xsarius
4Zodra de rode LED op het apparaat
knippert dan geeft dit aan dat het de
configuratiegegevens van het apparaat
ontvangt. Klik op ‘Zelfde Status’.
3Druk op de bel, het rode licht knippert
een paar keer, scan de QR code van het
apparaat.

5Voer de WiFi-naam en het wachtwoord
in om het apparaat met de
WiFi-hotspot te verbinden, klik op
‘volgende’.
7
6De QR-code verschijnt op het scherm
van uw mobiele telefoon. Plaats de
QR-code voor de camera van de
video-deurbel op 15-20cm afstand. Als
u een geluid hoort, kunt u naar de
volgende stap gaan. Klik op de onder-
staande bevestiging.