Xtool V200 User manual

Shenzhen Xtooltech Intelligent Co., LTD
USER MANUAL
V200 Wireless Diagnostics Module

I
Please read this user manual carefully before using the V200. When
reading the manual, please pay attention to the words “Note” or
“Caution” and read them carefully for appropriate operation.
Trademarks
is a registered trademark of Shenzhen Xtooltech Intelligent
CO., LTD.
In countries that the trademarks, service marks, domain names, logos,
and the name of the company are not registered, Xtool claims that it
still reserves the ownership of the unregistered trademarks, service
marks, domain names, logos, and the company name. All other marks
for the other products and the company’s name mentioned in the
manual still belong to the original registered company.
You may not use the trademarks, service marks, domain names, logo,
and company name of Xtool or other companies mentioned without
written permission from the trademark holder.
Xtool reserves the right to the final interpretation of this manual
content.
Copyright
Without the written consent of Shenzhen Xtooltech Intelligent Co., Ltd.,
any company or individual shall not copy or backup this operation
manual in any form (electronic, mechanical, photocopying, recording,
or other forms).
Declaration

II
This manual is designed for the usage of the V200 and provides
operating instructions and product descriptions for users of the V200.
No part of this manual can be reproduced, stored in a retrieval system,
or transmitted, in any form or by any means (electronic, mechanical,
photocopying, recording, or otherwise), without the prior written
permission of Xtool.
Use the device only as described in this manual. Xtool is not
responsible for any consequences of violating the laws and
regulations caused by using the product or its data information
Xtool shall not be liable for any incidental or consequential damages
or for any economic consequential damages arising from the
accidents of individual users and the third parties, misuse or abuse of
the device, unauthorized change or repair of the device, or the failure
made by the user not to use the product according to the manual.
The configuration, function, appearance and UI of this product
involved in the user manual will continue to be optimized, and the
manual may not be updated in time. Please refer to the actual product
if there is any difference. The final interpretation right belongs to
Shenzhen Xtooltech Intelligent Co., Ltd.
Operation Instructions
For safe operation, please follow the instructions below:
Keep the device away from heat or fumes when you are using it.
If the vehicle battery contains acid, please keep your hands and
skin or fire sources away from the battery during testing.

III
The exhaust gas of the vehicle contains harmful chemicals, please
ensure adequate ventilation.
Do not touch the cooling system components or exhaust manifolds
when the engine is running due to the high temperatures reached.
Make sure the car is securely parked, Neutral is selected or the
selector is at P or N position to prevent the vehicle from moving
when the engine starts.
Make sure the (DLC) diagnostic link connector is functioning
properly before starting the test to avoid damage to the Diagnostic
Tablet.
Do not switch off the power or unplug the connectors during testing,
otherwise, you may damage the ECU and/or the Diagnostic Tablet.
Cautions!
Avoid shaking or dismantling the unit as it may damage the internal
components.
Do not use hard or sharp objects to touch the LCD screen;
Do not use excessive force;
Do not expose the screen to strong sunlight for a long period.
Please keep it away from water, moisture, high temperature, or
very low temperature.
If necessary, calibrate the screen before testing to ensure the
accuracy of LCD performance.
Keep the main unit away from strong magnetic fields.
Aftersales-Services

IV
E-Mail: [e-mail]
Tel: [phone] or [phone] (China)
Official Website: www.xtooltech.com
Please provide your device serial number, VIN code, vehicle model, software version,
and other details when seeking technical support.
If there are screenshots or videos, it will better help us locate your problem.

V
Content
1 GENERAL INTRODUCTION ......................................................... 6
Front/Back View of VCI BOX................................................................................................6
Top/Bottom View of VCI BOX...............................................................................................6
2TECHNICAL SPECIFICATIONS .......................................................................... 7
4 DIAGNOSIS.................................................................................. 7
Vehicle Connection..................................................................................... 8
Bluetooth...........................................................................错误!未定义书签。
SHENZHEN XTOOLTECH INTELLIGENT CO., LTD...................... 11

1 GENERAL INTRODUCTION
FRONT/BACK VIEW OF VCI BOX
Front Back
①Display Screen: Show status of the V200 like battery voltage,
Bluetooth connection, and car communication status.
②Nameplate: Show basic information about the V200, like the serial
number.
Make sure that you’re using the V200 that is paired with the tablet, or it will not
communicate. The serial number of the VCI box must be the same as the serial
number of the tablet.
TOP/BOTTOM VIEW OF V200
Top Bottom
①
②
①
②

①DB15 Port: Used to connect the V200 to the OBDII port on the
vehicle.
②USB-B Port: Used to connect the V200 to the tablet.
2 TECHNICAL SPECIFICATIONS
Specification
Item
Description
Display
1.54-inch, 128×64 resolution
Connectivity
USB
Bluetooth
Ports
USB type-B
DB15
Input Voltage
12V DC
Operating
Temperature
-10~50℃
Relative Humidity
< 90%
Dimensions
91.0×157.0×35.0（mm）
3 DIAGNOSIS
The V200 connect to the vehicle through the main test cable. And
V200 can connect connect the tablet via Bluetooth and the USB Type-
B

VEHICLE CONNECTION
The V200 should establish communication with the vehicle, and
Bluetooth should be connected between the tablet and the V200.
Please follow the steps below.
Fig 4-1
1. Turn on the tablet.
2. Connect the vehicle, the V200 and the tablet following the
diagram below. Usually, the OBD port is located under the
dashboard, inside driver’s footwell.
3. Wait for the VCI box to communicate with the tablet, then click
into the menus to perform the functions.
If necessary, please connect the V200 with the tablet using the USB 3.0 to USB-B
cable, especially when working on some processes that needs to transfer lots of data.

FCC Warning
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any inte rference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interferenceto radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for
help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator and
your body.

SHENZHEN XTOOLTECH INTELLIGENT CO., LTD
Company address: 17&18/F, Building A2, Creativity City, Liuxian
Avenue, Nanshan District, Shenzhen, China
Factory address: 2/F, Building 12, Tangtou Third Industrial Zone,
Shiyan Street, Baoan District, Shenzhen, China
Service-Hotline: [phone]
Email: [e-mail]
[e-mail]
Fax: [phone]
Website: www.Xtooltech.com