Yamaha PDM-4220 User manual

SERVICE MANUAL
100985
SERVICE MANUAL
■Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
■Connection diagram . . . . . . . . . . . . . . . . . . . . . . .36
■Wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . .37
■Disassembly diagram . . . . . . . . . . . . . . . . . . . . . .39
■Replacement parts list . . . . . . . . . . . . . . . . . . . . .41
■Diagnosis of the panel module . . . . . . . . . . . . .42
■ CONTENTS
■Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
■Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
■Service points . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
■Component names . . . . . . . . . . . . . . . . . . . . . . . . .5
■Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
■Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .22
■Self diagnosis function . . . . . . . . . . . . . . . . . . . .32
PLASMA MONITOR
PDM-4220
PDM-4220
Be sure to read this manual before servicing. To assure safety from fire, electric shock, injury, harmful radiation
and materials, various measures are provided in this Plasma display.
Be sure to read cautionary items described in the manual to maintain safety before servicing.
Caution
1. Since Panel Module and front Filter are made of glass, handling the broken Module and Filter shall be
taken care sufficiently in order not to be injured.
2. Replacing work shall be started after the Panel Module and the AC/DC Power supply become sufficiently
cool.
3. Special care shall be taken to the display area in order not to damage its surface.
4. The Panel Module shall not be touched with bare hand to protect its surface from stains.
5. It is recommended to use clean soft gloves during the replacing work in order to protect not only the dis-
play area of the Panel Module but also a serviceman himself.
6. The Chip Tube of Panel Module (located upper left of the back and surrounded by frame) and flexible
cables connecting Panel glasses to drive circuit PWBs are very weak, so shall be taken care sufficiently
not to break. If you break Chip Tube, the Panel doesn’t display anything forever.
Service Warning
© 2005 YAMAHA CORPORATION. All rights reseved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
’05.10

2
PDM-4220
PDM-4220
PRECAUTIONS
How to clean the plasma screen panel of the monitor
Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet.
To prevent scratching or damaging the plasma screen face, do not knock or rub the surface with sharp or hard
objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If it is not
enough, then use a cloth with mild detergent. Do not use harsh or abrasive cleaners.
How to clean the cabinet of the monitor
Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neutral
detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth.
Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax,
glass cleaner, etc. especially because they would cause discoloration, scratches or cracks.
Large-screen, high-definition plasma display panel
The 42-inch color plasma display panel, with a resolution of 1024 (H) x 1024 (V) pixels, creates a high-definition,
large-screen(aspect ratio : 16:9) and low-profile flat display. Free from electromagnetic interferences from geomag-
netic sources and ambient power lines, the panel produces high-quality display images free from color misconver-
gence and display distortion.
High Performance Digital Processor
A wide range of input signals can be handed,including composite, component,and HDMI.High Definition Digital Pro-
cessor creates the fine-textured image with dynamic contrast. In addition, it corresponds to a broad array of per-
sonal computer signals, from 640 x 400 and 640 x 480 VGAto 1600 x 1200 UXGA.(Analog Input)
Easy-to-use remote control and on screen display system
The remote control included eases the work of setting display controls. Further, the on-screen display system,
displays the status of signal reception and display control settings in an easy-to-view fashion.
Power saving system
When connected to a VESA DPMS-compliant PC, the monitor cuts its power consumption while it is idle.
Connecting to an Audio Visual Device
·Three SCART terminals, a composite/S Terminal*1, a component terminal*2, a HDMI terminal and have been
added. A composite video output terminal is also provided as a monitoring output.
*1 A composite/S terminal =A side input
·A wide range of devices other than personal computers can also be connected.
·A RGB input is possible to switch to component signal from the Menu screen.
Power Swivel Feature
It allows to turn the plasma display left or right within ±30 degree using the remote control.
■ Features

3
PDM-4220
PDM-4220
Panel
Ambient
conditions
Power supply
Power consumption/at standby
Audio output
(RGB input)
Input terminals
Input terminals
Input terminals
RF Video System
Input signals
Input signals
Sync signals
(RF input)
(Video input)
Output Signal
Temperature
Relative humidity
Net dimensions
(excluding Speakers/Stand)
Net weight
(excluding Speakers/Stand)
Resolution
Display
dimensions
Operating : 5 °C to 35 °C, Storage : 0 °C to 40 °C
Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
AC100 - 240V, 50/60Hz
RGB1 DVI input terminal (DVI-D)
RGB1 audio input terminal (3.5mm Stereo Mini Jack)
RGB2 analog RGB input terminal (D-sub 15-pin)
RGB2 audio input terminal (3.5mm Stereo Mini Jack)
0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)
480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/50*
1
, 720p/60
H/V separate, TTL level [2KΩ]
H/V composite, TTL level [2KΩ]
Sync on green, 0.3 Vp-p [75Ω]
ANT : 75ΩUnbalanced
PAL B, G, H / I / D, K
SECAM B, G / K1 / L, Lí / (D, K)*
2
OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
OUTPUT (HEADPHONE): L/R audio monitor- output terminal (3.5mm Stereo Mini Jack)
1030 (W) x 636 (H) x 104 (D) mm
1024(H) x 1024 (V) pixels
Approx. 42 inches (922 (H) x 522 (V) mm,diagonal 1059mm)
36.0kg
380W / <3W
speaker 12W + 12W (6Ω)
AV1: composite video/S video/L/R audio input terminal (SCART)
AV2: composite video/RGB/L/R audio input terminal (SCART)
AV3: composite video/RGB/L/R audio input terminal (SCART)
AV4: composite video/Y/P
B /P R video/L/R audio input terminal (RCA)
AV5: composite video/S video/L/R audio input terminal (RCA)
AV6: HDMI input terminal
AV1: PAL, SECAM, NTSC3.58, NTSC4.43
AV2: PAL, SECAM, NTSC3.58, NTSC4.43, RGB
AV3: PAL, SECAM, NTSC3.58, NTSC4.43, RGB
AV4: PAL, SECAM, NTSC3.58, NTSC4.43
AV4: 480i, 576i, 480p, 576p, 720p/50, 720p/60, 1080i/50, 1080i/60,
AV5: PAL, SECAM, NTSC3.58, NTSC4.43
AV6: HDMI input signal
Applicable video signals for each input terminal
Terminal RCA/S-video/SCART DVI D-sub
Signal CVBS S-video Component SCART (RGB) PC STB RGB Component
AV1
AV2
AV3
AV4
AV5
AV6
( :Available)
HDMI
RGB1
RGB2
*1 720/50 is supported by RGB1(DVI-STB)
*2
The SECAM D,K system might not be normally received, depending on the model.
■ Specifications

4
PDM-4220
PDM-4220
Lead free solder
This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions
before attempting any soldering work.
Caution:Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free
solder can splatter at high temperatures (600 °C).
Lead free solder indicator
Printed circuit boards using lead free solder are engraved with an "F."
Properties of lead free solder
The melting point of lead free solder is 40-50 °C higher than leaded solder.
Servicing solder
Solder with an alloy composition of Sn-3.0Ag-0.5Cu or Sn-0.7Cu is recommended.
Although servicing with leaded solder is possible, there are a few precautions that have to be taken. (Not taking
these precautions may cause the solder to not harden properly, and lead to consequent malfunctions.)
Precautions when using leaded solder
Remove all lead free solder from soldered joints when replacing components.
If leaded solder should be added to existing lead free joints, mix in the leaded solder thoroughly after the lead
free solder has been completely melted (do not apply the soldering iron without solder).
Servicing soldering iron
A soldering iron with a temperature setting capability (temperature control function) is recommended.
The melting point of lead free solder is higher than leaded solder. Use a soldering iron that maintains a high
stable temperature (large heat capacity), and that allows temperature adjustment according to the part being
serviced, to avoid poor servicing performance.
Recommended soldering iron:
Soldering iron with temperature control function (temperature range: 320-450 °C)
Recommended temperature range per part:
Part Soldering iron temperature
Mounting (chips) on mounted PCB 320 °C±30 °C
Mounting (chips) on empty PCB 380 °C±30 °C
Chassis, metallic shield, etc. 420 °C±30 °C
FILTER PWB, SW PWB, LED/RECEIVER PWB, SP TERMINAL(L/R) PWB
AUDIO PWB, JOINT PWB, Swievel PWB, HDMI PWB, control PWB
VIDEO PWB
TUNER PWB
The PWB assembly which has used lead free solder
Readjustment Power supply voltage
When a PANEL or a Power Unit is exchanged, power supply voltage needs to be adjusted. Please adjust to
make the values of Va and Vs of as should on the label currently stuck on the panel back upper parts.Adjust-
ment is performed by VR in the power supply unit. Please refer to the procedures of "Va" and "Vs" adjustments
on 17page.
■ Service points

5
PDM-4220
PDM-4220
•( ) indicates the function while the MENU is displayed on the screen.
Remote-control
receiver
Indicating lamp
Menu button
INPUT SELECT button
(OK button)
CHANNEL
UP/DOWN buttons
(SELECT button)
SUB-POWER button
VOLUME
UP/DOWN
buttons
( ADJUST
buttons)
• Adjustment buttons are located
on the bottom.
• The back cover is provided with
indications to distinguish the
adjustment buttons.
•The main power switch is located at the
back, on the lower surface.
Main power switch
[Main unit]
[Remote control]
STANDBY/ON RECALL
TV DVD
/I i
+
AV 1 AV 2 AV 3 AV 4
AV 5
MENU
VOL PROG
A. MODE P. MODE
RETURN
AV 6 RGB 1 RGB 2
23
456
78
0
9
?
i
I/II
2-4-12
1
OK
+
P +
P
■ Component names

6
PDM-4220
PDM-4220
• How to get to Adjustment mode
Using the front control buttons with the set turned off (standby) can activate it.
Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for
more than 5 seconds.
The set turns on in adjustment mode with OSD.
• Changing data and Selecting Adjustment code
When the set is in adjustment mode, the cursor , , , and OK buttons of the remote control or front panel
may be used as the adjustment keys.
, buttons are used for selecting adjustment code.
, buttons are used for changing data values.
OK button is used for confirming the data.
After finishing the necessary adjustment press MENU button. Adjustment mode is released and the set returns to
normal condition.
• Memory Initialize operation
NOTE: The execution of this function returns the adjustment codes to the preset values, therefore, adjustment
data will be lost.
Procedure
(1) Enter Adjustment Mode.
(2) Select MEMORY INIT adjustment code (No.658) and change the data value from 0 to 1.
(3) Activate MEMORY INIT by pressing OK button for more than 3 seconds.
(4) Select No.525 and change data value from 1 to 0.
(5) Check that the receiving channel goes to P1. Unit is set to preset values.
■ Adjustment

7
PDM-4220
PDM-4220
Service adjustment items by I2C-bus control (MAIN Part)
: shoule be adjusted
: should be followed previous data
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
ADJ. Items Mode PWB PWB PWB PANEL
0 SUB_CONTRAST (RF) Main 15 8
1 SUB_CONTRAST (AV1) Main/Sub Composite mode 15 8
2 SUB_CONTRAST (AV2) Main/Sub Composite mode 15 8
3 SUB_CONTRAST (AV3) Main/Sub Composite mode 15 8
4 SUB_CONTRAST (AV4) Main/Sub Composite mode 15 8
5 SUB_CONTRAST (AV5) Main/Sub Composite mode 15 8
6 SUB_CONTRAST (RF) Sub 15 8
7 Sub Color Main 15 8
8 Sub Color Sub 15 8
9 TINT (RF) Main 63 33
10 TINT (VIDEO) Main 63 33
11 TINT (RF) Sub 63 33
12 TINT (VIDEO) Sub 63 33
13 Free
14 Free
15 Free
16 Free
17 Reference Amplitude(RGB_AMP) RF/VIDEO 254 127
18 Reference Amplitude(RGB_AMP) PC 254 127
19 Reference Amplitude(RGB_AMP) Multi Picture mode 254 130
20 Display for Max. Amplitude Level Main - -
21 Display for Max. Amplitude Level Sub - -
22 Offset Value(+/-) of Upper Limit (for FC :RGB-AMP ) Multi Picture mode 18 2
23 Offset Value(+/-) of Upper Limit (for TB1274:SUB-CONT) Single Picture mode 18 2
24 Offset Value(+/-) of Upper Limit (for TB1274:Sub Color) 18 2
25 Terget value of White peak Adj. Single Picture mode 237 235
26 Terget value of Color Level Adj. (for TB1274:Sub Color) 237 235
27 Set Blue Gamma gain On/Off 0:Off, 1:On (For 55V) For 55V 1 1
28 Contrast mode<Dynamic> SW (TV) 0:Dynamic, 1:Dynamic+Auto RF 1 1
29 Select for WIDE Mode 11
30 PinP Function (for PC) 0:PinP, 1:Infomation1, 2:Infomaiton Split 2 0
31 Black Level(RGB_AMP) RF/VIDEO 254 127
32 Black Level(RGB_AMP) PC 254 127
33 Black Level(RGB_AMP) HDMI 254 127
34 Black Level(RGB_AMP) For USA NTSC/480i 254 127
35 YNR Input Level for AV1-5 Mode RF 7 7
36 YNR Input Level for AV1-5 Mode VIDEO 7 7
37 YNR Input Level for AV1-5 Mode Scart-RGB(50/60Hz) 7 7
38 YNR Input Level for AV1-5 Mode 480i/576i 7 7
39 YNR Input Level for AV1-5 Mode 480p/576p 7 7
40 YNR Input Level for AV1-5 Mode 1080i-50/60/720p 7 7
41 YNR Input Level for DVI-STV Mode 480i/480p/576i/576p/VGA 7 7
42 YNR Input Level for DVI-STV Mode 1080i-50/60/720p 7 7
43 CNR Input Level at Low level for AV1-5 Mode RF/VIDEO 7 4
44 CNR Input Level at Low level for AV1-5 Mode Scart-RGB(50/60Hz) 7 4
45 CNR Input Level at Low level for AV1-5 Mode 480i/576i 7 4
46 CNR Input Level at Low level for AV1-5 Mode 480p/576p 7 4
47 CNR Input Level at Low level for AV1-5 Mode 1080i-50/60/720p 7 4
48 CNR Input Level at Low level for DVI-STV Mode 480i/480p/576i/576p/VGA 7 2
49 CNR Input Level at Low level for DVI-STV Mode 1080i-50/60/720p 7 2
50 CNR Input Level at Low level for Dsub Comp. Mode 480i/576i 7 2
51 CNR Input Level at Low level for Dsub Comp. Mode 480p/576p 7 2
52 CNR Input Level at Low level for Dsub Comp. Mode 1080i-50/60/720p 7 2
53 main/sub YFRNR level [MYNRP0] NTSC/PAL/ Multi picture 7 1
54 main/sub YFRNR level [MYNRP5] NTSC/PAL-VIDEO 7 0
55 main/sub YFRNR level [MYNRP6'] Scart-RGB(50/60Hz) 7 0
56 main/sub YFRNR level [MYNRP6] 70
57 main/sub YFRNR level [MYNRP7] 70
58 main/sub YFRNR level [MYNRP8] 70
59 main/sub CFRNR level [MCNRP0] NTSC/PAL/ 7 0
60 main/sub CFRNR level [MCNRP5] NTSC/PAL-VIDEO 7 0
61 main/sub CFRNR level [MCNRP6'] Scart-RGB(50/60Hz) 7 0
62 main/sub CFRNR level [MCNRP6] 480i/576i 7 0
63 main/sub CFRNR level [MCNRP7] 480p/576p 7 0
64 main/sub CFRNR level [MCNRP8] 1080i-50/60/720p 7 0
65 B-Y/B R-Y/R (VER. Enhancer Gain) [CVEG0] NTSC/PAL/480i/576i/ Multi picture 15 15
66 B-Y/B R-Y/R (VER. Enhancer Gain) [CVEG1] 480p/576p/1080i-50/60/720p 15 9
67 DSB Gain of Vertical for B-Y/B R-Y/R [CVDSBG0] NTSC/PAL/480i/576i/ Multi picture 3 0
68 DSB Gain of Vertical for B-Y/B R-Y/R [CVDSBG1] 480p/576p/1080i-50/60/720p 3 0
69 DSB coring of Vertical for B-Y/B R-Y/R [CVDSBC0] NTSC/PAL/480i/576i/ Multi picture 7 0
70 DSB coring of Vertical for B-Y/B R-Y/R [CVDSBC1] 480p/576p/1080i-50/60/720p 7 0
71 B-Y/B R-Y/R (VRE. Enhancer) CLIP 0:CTI [CVECLP0] NTSC/PAL/480i/576i/ Multi picture 1 0
72 B-Y/B R-Y/R (VRE. Enhancer) CLIP 0:CTI [CVECLP1] 480p/576p/1080i-50/60/720p 1 0
73 Horizontal HPF Peek Freq. SW for B-Y/B,R-Y/R [CHHPF0] NTSC/PAL/480i/576i/ Multi picture 3 2
74 Horizontal HPF Peek Freq. SW for B-Y/B,R-Y/R [CHHPF1] 480p/576p/1080i-50/60/720p 3 2
75 Horizontal Enhancer Gain for B-Y/B,R-Y/R [CHEG0] NTSC/PAL/480i/576i/ Multi picture 15 15
76 Horizontal Enhancer Gain for B-Y/B,R-Y/R [CHEG1] 480p/576p/1080i-50/60/720p 15 9
77 Horizontal DSB Gain for B-Y/B,R-Y/R [CHDSBG0] NTSC/PAL/480i/576i/ Multi picture 3 0
78 Horizontal DSB Gain for B-Y/B,R-Y/R [CHDSBG1] 480p/576p/1080i-50/60/720p 3 0
79 Horizontal DSB Coring for B-Y/B,R-Y/R [CHDSBC0] NTSC/PAL/480i/576i/ Multi picture 7 0
80 Horizontal DSB Coring for B-Y/B,R-Y/R [CHDSBC1] 480p/576p/1080i-50/60/720p 7 0
81 Horizontal Enhancer Clip for B-Y/B,R-Y/G 0:CTI [CHECLP0] NTSC/PAL/480i/576i/ Multi picture 1 0
82 Horizontal Enhancer Clip for B-Y/B,R-Y/G 0:CTI [CHECLP1] 480p/576p/1080i-50/60/720p 1 0
83 B-Y Clamp offset NTSC/PAL/480i/576i/480p/576p 255 128
84 R-Y Clamp offset NTSC/PAL/480i/576i/480p/576p 255 128
85 B-Y Clamp offset 1080i-50/60 255 128
86 R-Y Clamp offset 1080i-50/60 255 128
87 B-Y Clamp offset 720p 255 128
88 R-Y Clamp offset 720p 255 128
89 B-Y Clamp offset [DVI-STB] 480i/576i/480p/576p/VGA 255 128
90 R-Y Clamp offset [DVI-STB] 480i/576i/480p/576p/VGA 255 128
91 B-Y Clamp offset [DVI-STB] 1080i-50/60 255 128
92 R-Y Clamp offset [DVI-STB] 1080i-50/60 255 128
93 B-Y Clamp offset [DVI-STB] 720p 255 128
94 R-Y Clamp offset [DVI-STB] 720p 255 128
95 P/N ID Main 1 0
96 P/N ID Sub 1 0
97 Sharpness Gain(RF/NR) Main/Sub 15 2
98 Free
99 Free
Changed Component
Multi
480i/576i(Except HDMI)
480p/576p(Except HDMI)
1080i-50/60/720p(Except HDMI)

8
PDM-4220
PDM-4220
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
ADJ. Items Mode PWB PWB PWB PANEL
Changed Component
100 Free
101 Free
102 Free
103 Free
104 Free
105 Free
106 Free
107 Free
108 Free
109 Free
110 Shar
p
ness Gain
(
RF
)
BG/DK/I Sub 15 8
111 Shar
p
ness Gain
(
RF
)
M Sub 15 8
112 Shar
p
ness Gain
(
RF
)
L Sub 15 8
113 Shar
p
ness Gain
(
RF
)
L' Sub 15 8
114 Shar
p
ness Gain
(
VIDEO
)
PAL Sub 15 8
115 Shar
p
ness Gain
(
VIDEO
)
NTSC3.58 Sub 15 8
116 Shar
p
ness Gain
(
VIDEO
)
SECAM,B/W Sub 15 8
117 Shar
p
ness Gain
(
VIDEO
)
NTSC4.43 Sub 15 8
118 Shar
p
ness Gain
(
VIDEO
)
N-PAL Sub 15 8
119 Shar
p
ness Gain
(
VIDEO
)
M-PAL Sub 15 8
120 Shar
p
ness Gain
(
S.VIDEO
)
Sub 15 10
121 Free
122 Shar
p
ness f0
(
RF
)
BG/DK/I Main/Sub 3 2
123 Shar
p
ness f0
(
RF
)
M Main/Sub 3 2
124 Shar
p
ness f0
(
RF
)
L Main/Sub 3 2
125 Shar
p
ness f0
(
RF
)
L' Main/Sub 3 2
126 Shar
p
ness f0
(
VIDEO
)
PAL Main/Sub 3 2
127 Shar
p
ness f0
(
VIDEO
)
NTSC3.58 Main/Sub 3 2
128 Shar
p
ness f0
(
VIDEO
)
SECAM,B/W Main/Sub 3 2
129 Shar
p
ness f0
(
VIDEO
)
NTSC4.43 Main/Sub 3 2
130 Shar
p
ness f0
(
VIDEO
)
N-PAL Main/Sub 3 2
131 Shar
p
ness f0
(
VIDEO
)
M-PAL Main/Sub 3 2
132 Free
133 Y Out Level M
(
4.5
)
Main 63 15
134 Y Out Level B/G
(
5.5
)
Main 63 13
135 Y Out Level D/K
(
6.5
)
Main 63 16
136 Y Out Level I
(
6.0
)
Main 63 14
137 Y Out Level L
(
6.5
)
Main 63 13
138 Y Out Level L'
(
6.5
)
Main 63 16
139 Y Out Level
(
VIDEO
)
Main 63 15
140 Y Out Level
(
TEXT
)
Main 63 0
141 Free
142 Y Out Level M
(
4.5
)
Sub 63 19
143 Y Out Level B/G
(
5.5
)
Sub 63 13
144 Y Out Level D/K
(
6.5
)
Sub 63 12
145 Y Out Level I
(
6.0
)
Sub 63 13
146 Y Out Level L
(
6.5
)
Sub 63 12
147 Y Out Level L'
(
6.5
)
Sub 63 15
148 Y Out Level
(
VIDEO
)
Sub 63 13
149 Y Out Level
(
TEXT
)
Sub 63 4
150 Free
151 C Out Level M
(
4.5
)
Main 63 7
152 C Out Level B/G
(
5.5
)
Main 63 7
153 C Out Level D/K
(
6.5
)
Main 63 7
154 C Out Level I
(
6.0
)
Main 63 7
155 C Out Level L
(
6.5
)
Main 63 8
156 C Out Level L'
(
6.5
)
Main 63 8
157 C Out Level
(
VIDEO
)
Main 63 15
158 C Out Level
(
TEXT
)
Main 63 6
159 Free
160 C Out Level M
(
4.5
)
Sub 63 3
161 C Out Level B/G
(
5.5
)
Sub 63 8
162 C Out Level D/K
(
6.5
)
Sub 63 8
163 C Out Level I
(
6.0
)
Sub 63 7
164 C Out Level L
(
6.5
)
Sub 63 7
165 C Out Level L'
(
6.5
)
Sub 63 7
166 C Out Level
(
VIDEO
)
Sub 63 10
167 C Out Level
(
TEXT
)
Sub 63 8
168 Free
169 BPF_Q
(
4.43MHz
)
Main/Sub 3 3
170 BPF_f0
(
4.43MHz
)
Main/Sub 3 1
171 C_TRAP_SW
(
COMB=OFF-PAL/NTSC4.43/NTSC3.58
)
Main/Sub 1 0
172 LPF Main/Sub 1 0
173 SECAM D-Tra
p
Main/Sub 1 1
174 FILTER SW
(
RF
)
Main/Sub 1 0
175 Y_DL
(
4.5MHz
)
Main 10 6
176 Y_DL
(
5.5MHz PAL/NTSC4.43
)
Main 10 4
177 Y_DL
(
5.5MHz SECAM
)
Main 10 0
178 Y_DL
(
6.0PAL/NTSC4.43
)
Main 10 8
179 Y_DL
(
6.0SECAM
)
Main 10 9
180 Y_DL
(
6.5PAL/NTSC4.43
)
Main 10 6
181 Y_DL
(
6.5SECAM
)
Main 10 10
182 Y_DL
(
L
)
Main 10 5
183 Y_DL
(
L'
)
Main 10 5
184 Y_DL
(
VIDEO PAL/NTSC4.43
)
Main 10 6
185 Y_DL
(
VIDEO SECAM
)
Main 10 8
186 Y_DL
(
VIDEO NTSC
)
Main 10 6
187 Y_DL
(
4.5MHz
)
Sub 10 5
188 Y_DL
(
5.5MHz PAL/NTSC4.43
)
Sub 10 2
189 Y_DL
(
5.5MHz SECAM
)
Sub 10 0
190 Y_DL
(
6.0PAL/NTSC4.43
)
Sub 10 7
191 Y_DL
(
6.0SECAM
)
Sub 10 5
192 Y_DL
(
6.5PAL/NTSC4.43
)
Sub 10 5
193 Y_DL
(
6.5SECAM
)
Sub 10 5
194 Y_DL
(
L
)
Sub 10 5
195 Y_DL
(
L'
)
Sub 10 5
196 Y_DL
(
VIDEO PAL/NTSC4.43
)
Sub 10 5
197 Y_DL
(
VIDEO SECAM
)
Sub 10 5
198 Y_DL
(
VIDEO NTSC
)
Sub 10 5
199 NTSC Comb
(
Comb off
)
Sub 1 1
: shoule be adjusted
: should be followed previous data

9
PDM-4220
PDM-4220
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
ADJ. Items Mode PWB PWB PWB PANEL
Changed Component
200 Cb offset1 Main 15 8
201 Free
202 Cr offset1 Main 15 8
203 Free
204 Cb offset1 Sub 15 8
205 Free
206 Cr offset1 Sub 15 8
207 Free
208 MVM (VIDEO
)
10
209 AFC_GAIN
(
AV00
)
30
210 AFC_GAIN
(
AV1
)
30
211 AFC_GAIN
(
AV2
)
30
212 AFC_GAIN
(
AV3
)
30
213 AFC_GAIN
(
AV4
)
30
214 AFC_GAIN
(
AV5
)
30
215 AFC_GAIN
(
Exce
p
t AV00
)
30
216 S_B-Y_ADJ Main 15 8
217 S_R-Y_ADJ Main 15 8
218 S_B-Y_ADJ Sub 15 8
219 S_R-Y_ADJ Sub 15 8
220 BELL_f0 Main/Sub 10
221 S_INHBT 10
222 S_ID 10
223 S_GP 30
224 S_V_ID 10
225 BELL/HPF 33
226 HS Phase Main 10
227 HS Phase Sub 10
228 Bandwidth 1 NTSC/PAL/480i/576i 32
229 Bandwidth 1 480
p
/576
p
32
230 Bandwidth 1 1080i-50/60/720
p
30
231 Bandwidth 2 NTSC/PAL/480i/576i 32
232 Bandwidth 2 480
p
/576
p
32
233 Bandwidth 2 1080i-50/60/720
p
30
234 Sub Contrast 1 Exce
p
t HDMI 15 0
235 Sub Contrast 1 HDMI 15 0
236 Sub Contrast 2 Exce
p
t HDMI 15 0
237 Sub Contrast 2 HDMI 15 0
238 Sub Color 1 Exce
p
t HDMI 15 0
239 Sub Color 1 HDMI 15 0
240 Sub Color 2 Exce
p
t HDMI 15 0
241 Sub Color 2 HDMI 15 0
242 HV THRU 1 NTSC/PAL/480i/576i/480
p
/576
p
10
243 HV THRU 1 1080i-50/60/720
p
10
244 HV THRU 2 NTSC/PAL/480i/576i/480
p
/576
p
10
245 HV THRU 2 1080i-50/60/720
p
10
246 H_SEP 1 RF/VIDEO 10
247 H_SEP 1 480i/576i 10
248 H_SEP 1 480
p
/576
p
10
249 H_SEP 1 1080i_5
0
10
250 H_SEP 1 1080i_60/720
p
10
251 H_SEP 2 RF/VIDEO 10
252 H_SEP 2 480i/576i 10
253 H_SEP 2 480
p
/576
p
10
254 H_SEP 2 1080i_5
0
10
255 H_SEP 2 1080i_60/720
p
10
256 V_SEP 1 RF/VIDEO 10
257 V_SEP 1 480i/576i 10
258 V_SEP 1 480
p
/576
p
10
259 V_SEP 1 1080i_5
0
10
260 V_SEP 1 1080i_60/720
p
10
261 V_SEP 2 RF/VIDEO 10
262 V_SEP 2 480i/576i 10
263 V_SEP 2 480
p
/576
p
10
264 V_SEP 2 1080i_5
0
10
265 V_SEP 2 1080i_60/720
p
10
266 AFC MODE 1 RF 30
267 AFC MODE 1 VIDEO 30
268 AFC MODE 2 RF 30
269 AFC MODE 2 VIDEO 30
270 N_LVL 1 RF 10
271 N_LVL 1 VIDEO 10
272 N_LVL 2 RF 10
273 N_LVL 2 VIDEO 10
274 Free
275 HD POSITION 1 480i/576i 15 0
276 HD POSITION 1 480
p
/576
p
15 0
277 HD POSITION 1 1080i_5
0
15 0
278 HD POSITION 1 1080i_60/720
p
15 0
279 Free
280 HD POSITION 2 480i/576i 15 0
281 HD POSITION 2 480
p
/576
p
15 0
282 HD POSITION 2 1080i_5
0
15 0
283 HD POSITION 2 1080i_60/720
p
15 0
284 Y LPF 1 RF 11
285 Y LPF 1 VIDEO 11
286 Y LPF 2 RF 11
287 Y LPF 2 VIDEO 11
288 Gain 1 11
289 Gain 2 11
290 YCS MODE NTSC3.58 30
291 3D DET 77
292 AFC Gain NTSC3.58 30
293 2D-CNR
k
30
294 2D-CNR Li
m
30
295 GMCON 10
296 Y-NC 10
297 Y-NC Lim 30
298 2D-YNR
k
30
299 2D-YNR Gai
n
30
: shoule be adjusted
: should be followed previous data

10
PDM-4220
PDM-4220
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
ADJ. Items Mode PWB PWB PWB PANEL
Changed Component
300 2D-YNR Lim 30
301 BLK EXP 30
302 CKILL 10
303 Output Clamp 10
304 Input Clamp auto 11
305 Int Clamp Manual 10
306 C-ENHA 10
307 YC-MIX 10
309 HSWINV 10
310 Free
311 V-ENHA Gain NTSC3.58 32
312 V-ENHA NL NTSC3.58 32
313 H-ENHA Gain NTSC3.58 31
314 3DNR Corr for 3DYCS 10
315 Burst ON for 2DYCS???? 10
316 MDMPL 10
317 MDMBL 10
318 H-MaskOut 70
319 V-MaskOut 70
320 Input Y-Delay (Main RF mode) for 3DYCS 74
321 Input Y-Delay (Main Video mode) for 3DYCS 74
322 Output-Y-Delay (Main RF Mode) for 3DYCS 15 8
323 Output-Y-Delay (Main Video Mode) for 3DYCS 15 8
324 V-ENHA Core NTSC3.58 30
325 Input Clamp Key NTSC3.58 11
326 Burst Gate Key NTSC3.58 11
327 Sync sep LPF NTSC3.58 10
328 H-WST NTSC3.58 73
329 HD Amp 1 NTSC3.58 76
330 HD Gain V NTSC3.58 31 13
331 HD Amp 2 NTSC3.58 71
332 HD Gain 1 NTSC3.58 31 8
333 HD Amp 3 NTSC3.58 75
334 HD Gain 2 NTSC3.58 31 4
335 ACMSLP NTSC3.58 31
336 ACSSLP NTSC3.58 32
337 AYMSLP NTSC3.58 32
338 AYSSLP NTSC3.58 32
339 ACMESET NTSC3.58 33
340 ACMFSET NTSC3.58 33
341 ACSESET NTSC3.58 32
342 ACSFSET NTSC3.58 32
343 AYMESET NTSC3.58 33
344 AYMFSET NTSC3.58 33
345 AYSESET NTSC3.58 31
346 AYSFSET NTSC3.58 33
347 BCMSLP NTSC3.58 33
348 BCSSLP NTSC3.58 33
349 BYMSLP NTSC3.58 33
350 BYSSLP NTSC3.58 32
351 BCMESET NTSC3.58 32
352 BCMFSET NTSC3.58 32
353 BCSESET NTSC3.58 32
354 BCSFSET NTSC3.58 32
355 BYMESET NTSC3.58 33
356 BYMFSET NTSC3.58 33
357 BYSESET NTSC3.58 33
358 BYSFSET NTSC3.58 33
359 BCMUP NTSC3.58 11
360 CECMP NTSC3.58 74
361 CSCMP NTSC3.58 15 0
362 F1HERNTSC3.58 31
363 F1VER NTSC3.58 31
364 MREF NTSC3.58 15 2
365 CDEYE NTSC3.58 32
366 YDEYE NTSC3.58 32
367 MDS NTSC3.58 10
368 F-TBC OFF MDMPL NTSC3.58 10
369 REC:C_DEC Except NTSC3.58 10
370 V-ENHA Gain Except NTSC3.58 32
371 V-ENHA NL Except NTSC3.58 31
372 H-ENHA Gain Except NTSC3.58 31
373 3D-CNR Lim for 2DYCS 70
374 3D-CNR k for 2DYCS 30
375 3D-CNR Gain for 2DYCS 70
376 3D-YNR Lim for 2DYCS 70
377 3D-YNR k for 2DYCS 30
378 3D-YNR Gain for 2DYCS70
379 YCS MODE Except NTSC3.58 30
380 AFC Gain Except NTSC3.58 30
381 Free
382 Free
383 V-ENHA Core Except NTSC3.58 30
384 Input Clamp Key Except NTSC3.58 11
385 Burst Gate Key Except NTSC3.58 11
386 Sync sep LPF Except NTSC3.58 10
387 H-WST Except NTSC3.58 73
388 HD Amp 1 Except NTSC3.58 76
389 HD Gain V Except NTSC3.58 31 13
390 HD Amp 2 Except NTSC3.58 71
391 HD Gain 1 Except NTSC3.58 31 8
392 HD Amp 3 Except NTSC3.58 75
393 HD Gain 2 Except NTSC3.58 31 4
394 ACMSLP Except NTSC3.58 32
395 ACSSLP Except NTSC3.58 32
396 AYMSLP Except NTSC3.58 30
397 AYSSLP Except NTSC3.58 30
398 ACMESET Except NTSC3.58 33
399 ACMFSET Except NTSC3.58 33
308 Video2 RGB Mode ON 10
: shoule be adjusted
: should be followed previous data

11
PDM-4220
PDM-4220
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
ADJ. Items Mode PWB PWB PWB PANEL
Changed Component
400 ACSESET Except NTSC3.58 3 2
401 ACSFSET Except NTSC3.58 3 2
402 AYMESET Except NTSC3.58 3 3
403 AYMFSET Except NTSC3.58 3 3
404 AYSESET Except NTSC3.58 3 1
405 AYSFSET Except NTSC3.58 3 3
406 BCMSLP Except NTSC3.58 3 3
407 BCSSLP Except NTSC3.58 3 3
408 BYMSLP Except NTSC3.58 3 3
409 BYSSLP Except NTSC3.58 3 2
410 BCMESET Except NTSC3.58 3 2
411 BCMFSET Except NTSC3.58 3 2
412 BCSESET Except NTSC3.58 3 2
413 BCSFSET Except NTSC3.58 3 2
414 BYMESET Except NTSC3.58 3 3
415 BYMFSET Except NTSC3.58 3 3
416 BYSESET Except NTSC3.58 3 3
417 BYSFSET Except NTSC3.58 3 3
418 BCMUP Except NTSC3.58 1 1
419 CECMP Except NTSC3.58 7 4
420 CSCMP Except NTSC3.58 15 0
421 F1HER Except NTSC3.58 3 1
422 F1VER Except NTSC3.58 3 1
423 MREF Except NTSC3.58 15 2
424 CDEYE Except NTSC3.58 3 2
425 YDEYE Except NTSC3.58 3 2
426 MDS Except NTSC3.58 1 0
427 F-TBC OFF MDMPL Except NTSC3.58 1 0
428 SEPA_LEVEL_DSUB 480i/576i 3 2
429 SEPA_LEVEL_DSUB 480p/576p 3 2
430 SEPA_LEVEL_DSUB 1080i_50 3 2
431 SEPA_LEVEL_DSUB 1080i_60/720p 3 2
432 HD-PHASE_DSUB 480i/576i 63 20
433 HD-PHASE_DSUB 480p/576p 63 20
434 HD-PHASE_DSUB 1080i_50 63 20
435 HD-PHASE_DSUB 1080i_60/720p 63 20
436 Heat APC function (HAPC) available 11
437 Y-select(0:1.0, 1:2.2, 2:2.8) RF/VIDEO 2 1
438 Y-select(0:1.0, 1:2.2, 2:2.8) DVI-PC/DVI-STB/DSUB-RGB 2 1
439 Select for APC function 10
440 CCFMD function RF/VIDEO 1 0
441 CCFMD function DVI-PC/DVI-STB/DSUB-RGB 1 0
442 NTSC/EBU(CCFORM) SD(YCbCr)/Scart-RGB 1 0
443 NTSC/EBU(CCFORM) HD(YPbPr) 1 0
444 NTSC/EBU(CCFORM) DVI-PC/DVI-STB/DSUB-RGB 1 0
445 Correction for Tracking (DCBON) RF/VIDEO-Color Temp. Cool 1 1
446 Correction for Tracking (DCBON) RF/VIDEO-Color Temp. Nor/War 1 1
447 Correction for Tracking (DCBON) DVI-PC/DVI-STB/DSUB-RGB 1 1
448 Color Temp. Correction 32
449 Brightness Limitted Function of PANEL [APSON] 11
450 Dynamic Back Light Correction For LCD 1 1
451 Dynamic Contrast Correction 11
452 Histogram Color Management 11
453 Histogram Gradation Amp. 11
454 Histogram Enhancer 11
455 Dynamic Enhancer 11
456 FC6 THROUGH 0:OFF, 1:THROUGH ON 10
457 APL Enhancer 0:OFF, 1:ON For Dynamic mode 1 1
458 ATC INPUT RED SELECT 10
459 HD/VD OUTPUT LEVEL 11
460 ISM Control for WVGA For WVGA 1 1
461 Free
462 WVGA BRIGHTNESS For WVGA 1 0
463 Black insert function 0:Not available, 1:Available For LCD Dynamic mode or Day 1 0
464 Dynamic Backlight function 0:No, 1:Yes For LCD 1 1
465 DVI-STB Setup 0:None VGA/Others Yes, 1:All none 2:All have DVI-STB 2 0
466 HSYNC De-Jitter 0:Low(Disabled), 1:High(Enabled) DVI-PC 1 0
467 HSYNC De-Jitter 0:Low(Disabled), 1:High(Enabled) DVI-STB 1 0
468 Free
469 AUTO_FM/AM (D11-D8) 15 2
470 AUTO_FM/AM (D 7-D0) 254 189
471 A2_THRESHOLD (D11-D8) 15 0
472 A2_THRESHOLD (D 7-D0) 254 112
473 PRE_AM Except 4.5MHz (Except Dual/Stereo
mode)254 17
474 VOL_SCART1 (D15-D8) 254 115
475 VOL_SCART1 (D 7-D5) 70
476 PRE_SCART 254 31
477 PRE_FM 4.5MHz(JAPAN) 254 34
478 PRE_FM 4.5MHz(Except BTSC-SAP mode) 254 32
479 PRE_FM 4.5MHz(BTSC-SAP) 254 60
480 PRE_FM 4.5MHz(Except KOREA
Dual/Stereo mode) 254 36
481 PRE_FM 4.5MHz(KOREA Dual/Stereo) 254 34
482 PRE_FM Except 4.5MHz(Except Dual/Stereo
mode) 254 17
483 PRE_FM Except 4.5MHz(Dual/Stereo mode) 254 27
484 PRE_NICAM 254 57
485 CM_THRESHOLD (D15-D8) 254 0
486 CM_THRESHOLD (D7 -D0) 254 36
487 AGC_LEVEL AGCL 30
488 TEXT H sync delay 127 0
489 TEXT V sync delay 127 50
490 TEXT_H_POSITION 254 42
491 TEXT_V_POSITION 254 39
492 Select for APC output [Except Europe model] Main RF 2 1
493 L_PLL.GAIN 10
494 Free
495 HDMI EDID WRITE ENABLE 0:Disenable, 1:Enable 11
496 BPMA : Back Porch Mode,Field2 11
: shoule be adjusted
: should be followed previous data

12
PDM-4220
PDM-4220
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
ADJ. Items Mode PWB PWB PWB PANEL
Changed Component
497 VCORA : VCO range select 30
498 CRNTA : change pump current select 70
499 TESTA : Matching Test to allow increment of stability counter. 1 1
500 PRMB : preamble criteria 31 6
501 HDCP : HDCP enable criteria 31 12
502 SMPLING For CCD 255 0
503 POLLING For CCD 255 15
504 START For CCD 7 2
505 TIMEOUT For CCD 30 5
506 STATUS For CCD 7 2
507 CCD-HP For CCD 79 40
508 CCD-CLK For CCD 79 57
509 Horizontal Position of OSD 15 7
510 Vertical Position of OSD 15 7
511 Free
512 Typical Value of Contrast OSD DYNAMIC 31 31
513 Free
514 Temperature for Fun start (Temp_High) 254 58
515 Temperature for Fun stop (Temp_Low) 254 55
516 Display of internal temperature °C(Temperature) 125 -
517 Display of Panel map version 255 -
518 Accumulation time for Panel (hours) 65535 -
519 Reset function of accumulation time for WVGA/LCD Panel 0:Normal 1:Reset 1 0
520 Power Save/Screen Saver On/Off Setting at Initialize, Reset and Shipping
P.S/S.S
0:Off/20m
1:On/Off
2:Off/Off
20
521 PC Power Save function (0:Impossible, 1:Possible) 11
522 Screen Saver-Picture shift amount 0:1pixel 1:2pixel 2:3pixel 2 0
523 Screen Saver-Picture shift Direction 0:dia /1:cross /2:up/down /3:left/right 3 0
524 Waite Time for POWER SAVE function (s) VIDEO/PC 254 15
525 BURN-IN enable/ disenable 0:Disenable, 1:Enable 1 1
526 BURN-IN mode 22
527 Recovery to an error of OSC frequency of Ceramic resonator for timer 62 34
528 EURO DK-SECAM MASK(V=60) 0:Normal 1:Mask(V=60) 1 0
529 Set Sound System at Auto mode of Sound Sys. (0:auto, 1:4.5MHz) Main 1 0
530 Power condition at power save mode of PC mode
after done RESET function 0:Keep last condition, 1:Return to normal condition 10
531 Select Wide mode for Europe model
(Normal= 5mode/ For Service= 10 mode) 0:Normal, 1:For service 1 0
532 Thermo sensor function available or not 0:None, 1:Yes 1 0
533 Video Input function available or not at RGB1 & RGB2 mode 0:Not Available, 1:Available 1 1
534 EURO SOUND SYSTEM DK Disable 0:Enable 1:Disable 1 0
535 Remote Function available 0:NO, 1:YES 11
536 Key Function available 0:NO, 1:YES 11
537 DVI-STB/RGB-COMPONENT Function available 0:NO, 1:YES 1 0
538 Terminal Mode Function available 0:Not Available, 1:Available RS232C 1 1
539 Select color control (0:Asia, 1:South America) Main/Sub 1 0
540 Language (Refer to below) 60
541 Hotel Mode(0:No, 1:Yes) 20
542 Analog Data (0:Keep EEPROM, 1:Not Keep to EEPROM) 1 0
543 Maximum Volume Limit 63 63
544 Power Mode(0:Last mode, 1:Pos1, 2-7:V1-6, 8-9:RGB1-2) 9 0
545 Free
546 Channel Select (0:CCIR, 1:CHINA) 10
547 Auto_sound 4.5 (0:Korea, 1:BTSC, 2:Japan) 20
548 T/TEXT(0:None, 1:Yes) 11
549 Free
550 Channel Preset(0:VESTEL, 1:GIFU, 2:HAMA, 3:HFDM, 4:AUSTRALIA) 4 1
551 V FREQ 60Hz Force (0:None, 1:Yes) 10
552 Offset value of adjusted TINT For COMPAL factory 20 11
553 Use "TINT Offset
↑ " 0:No, 1:Yes For COMPAL factory 1 0
554 PDP-BLK ON/OFF 1:ON, 0:OFF 1 0
555 IIC BUS Data/Clock Open(0:Close, 1:Open) 10
556 Protect for Image Retention 0:Off, 1:7%, 2:14%, 3:21%, 4:AUTO Dynamic mode 4 4
557 Protect for Image Retention 0:Off, 1:7%, 2:14%, 3:21%, 4:AUTO Natural mode 4 4
558 Protect for Image Retention 0:Off, 1:7%, 2:14%, 3:21%, 4:AUTO Cinema mode 4 4
559 Dispersion Time of Sustain current 0:2 Times, 1:4 times For Dynamic mode 1 0
560 Dispersion Time of Sustain current 0:2 Times, 1:4 times For Natural mode 1 1
561 Dispersion Time of Sustain current 0:2 Times, 1:4 times For Cinema mode 1 1
562 Dispersion Time of Sustain current 0:2 Times, 1:4 times For PC mode 1 1
563 Dispersion Time of Sustain current 0:2 Times, 1:4 times For PC-Movie mode 1 1
564 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 50Hz[Dynamic] mode 2 1
565 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 50Hz[Natural] mode 2 1
566 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 50Hz[Cinema] mode 2 1
567 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 60Hz[Dynamic] mode 2 1
568 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 60Hz[Natural] mode 2 1
569 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 60Hz[Cinema] mode 2 1
570 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 70Hz(PC) 2 0
572
573
574
575
576 Gray level of BM Index 31 4
577 Display of BM version 127 -
578 TA1391: SYNC SW Change
0:SYNC, 1:HDVD1&2
10
579 Free
580 Free
581 Counting time for discrimination of fH(M30625/TA1370) 31 2
582 Counting time for discrimination of fV(M30625/TA1370) 31 2
583 Counting time for discrimination of fV(TB1274) 31 2
584 Lower Limits value for Sync Detect of 2ms interval For AFC at TV mode 254 25
585 Lower Limits value for Sync Detect of 2ms interval For Free Running at TV mode 254 30
586 Lower Limits value for Sync Detect of 2ms interval For AUTO OFF at TV mode 254 25
587 Lower Limits value for Sync Detect of 2ms interval For Free Running at AV mode 254 30
588 Lower Limits value for Sync Detect of 2ms interval For Power Save at AV mode 254 5
589 Upper Limits Value for Sync Detect of 2ms interval For AFC at TV mode 254 40
590 Upper Limits Value for Sync Detect of 2ms interval For Free Running at TV mode 254 45
591 Upper Limits Value for Sync Detect of 2ms interval For AUTO OFF at TV mode 254 35
571 Main/Sub YFRNR passage level [MYNRP6]
[MYNRP7]
[MYNRP8]
[MYNRP8']
Dummy575
480i/576i (HDMI)
480p/576p (HDMI)
1080i-50/720p-50 (HDMI)
1080i-60/720p-60 (HDMI)
70
70
71
70
--
: shoule be adjusted
: should be followed previous data

13
PDM-4220
PDM-4220
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
ADJ. Items Mode PWB PWB PWB PANEL
Changed Component
592 U
pp
er Limits Value for S
y
nc Detect of 2ms interva
l
For Free Runnin
g
at AV mod
e
254 45
593 U
pp
er Limits Value for S
y
nc Detect of 2ms interva
l
For Power Save at AV mode 254 200
594 V detection
(
Format PWB) 0:out of ran
g
e, 128:NO V
(
or out of s
p
ec
)
,50/60
(
Hz
)
255 -
595 H detection
(
Format PWB) 0:out of ran
g
e, 128:NO H
(
or out of s
p
ec
)
, 15/28/31/33/45
(
kHz
)
255 -
596 V detection
(
VideoPWB) 0:out of ran
g
e, 128:NO V
(
or out of s
p
ec
)
, 255:interru
p
t 50/60
(
Hz
)
255 -
597 H detection
(
Video PWB) 0:out of ran
g
e, 128:NO H
(
or out of s
p
ec
)
, 15/28/31/33/45
(
kHz
)
255 -
598 COLOR SYSTEM CONTROL-MODE
(
0:BW, 2:3.58NTSC, 3:4.43NTSC,
)
Main - -
599 COLOR SYSTEM CONTROL-MODE
(
0:BW, 2:3.58NTSC, 3:4.43NTSC,
)
Sub - -
600 Countin
g
Value of 2ms S
y
nc.Detec
t
Main - -
601 Countin
g
Value of 2ms S
y
nc.Detec
t
Sub - -
602 TB1274 Read Data
(
00h
)
Main - -
603 TB1274 Read Data
(
01h
)
Main - -
604 TB1274 Read Data
(
00h
)
Sub - -
605 TB1274 Read Data
(
01h
)
Sub - -
606 MSP Read Data
(
CNTROL
)(
D15-D8
)
--
607 MSP Read Data
(
CNTROL
)(
D 7-D0
)
--
608 MSP Read Data
(
STANDARD_RES
)(
D15-D8
)
--
609 MSP Read Data
(
STANDARD_RES
)(
D 7-D0
)
--
610 MSP Read Data
(
STATUS
)(
D15-D8
)
--
611 MSP Read Data
(
STATUS
)(
D 7-D0
)
--
612 TA1391FG Read Data
(
00h
)
--
613 TA1391FG Read Data
(
01h
)
--
614 TA1391FG Read Data
(
02h
)
--
615 TA1391FG Read Data
(
03h
)
--
616 TA1391FG Read Data
(
04h
)
--
617 TA1391FG Read Data
(
05h
)
--
618 TA1391FG Read Data
(
06h
)
--
619 TA1391FG Read Data
(
07h
)
--
620 TA1370G Read Data
(
00h
)
--
621 TA1370G Read Data
(
01h
)
--
622 SiI9993 Read Data SYNC1 : VSYNC/Clock detect/S
y
nc detect 1 - -
623 SiI9993 Read Data NHRDL1 : N hardware value 1 --
624 SiI9993 Read Data NHRDM1 : N hardware value 1 --
625 SiI9993 Read Data NHRDH1 : N hardware value 1 --
626 SiI9993 Read Data CHRDL1 : CTS hardware value 1 - -
627 SiI9993 Read Data CHRDM1 : CTS hardware value 1 - -
628 SiI9993 Read Data CHRDH1 : CTS hardware value 1 - -
629 SiI9993 Read Data ACR1 : ACR PLL hardware value 1 - -
630 SiI9993 Read Data ACRS1 : ACR PLL hardware value 1 - -
631 SiI9993 Read Data SFREQ1 : "Extracted Sampling Frequency 1
channel status b24-27
(
same value at 0x30
)"
--
632 SiI9993 Read Data CLKFRQ1: Clock Accurac
y
/Sam
p
lin
g
Fre
q
uenc
y
-
633 SiI9993 Read Data ALNG1 : Audio len
g
th/Audio len
g
th max 1 - -
634 SiI9993 Read Data MT_MD1 : AV mute/HDMI mode 1 - -
635 SiI9993 Read Data VTYP1 : AVI infoframe t
yp
e code 1 - -
636 SiI9993 Read Data VVER1 : AVI infoframe version code 1 - -
637 SiI9993 Read Data VINFO11: AVI infoframe data 1 --
638 SiI9993 Read Data VINFO21: --
639 SiI9993 Read Data VINFO31: --
640 SiI9993 Read Data VINFO41: --
641 SiI9993 Read Data VINFO51: --
642 SiI9993 Read Data ATYP1 : AUDIO InfoFrame T
yp
e Code 1 - -
643 SiI9993 Read Data AVER1 : AUDIO InfoFrame Version Code 1 - -
644 SiI9993 Read Data AINFO11: AUDIO InfoFrame Data B
y
tes 1 - -
645 SiI9993 Read Data AINFO21: --
646 SiI9993 Read Data AINFO31: --
647 SiI9993 Read Data AINFO41: --
648 SiI9993 Read Data AINFO51: --
649 Initialize function for EEPROM of Video PWB board 10
650 Check condition of EEPROM of Video PWB board 0:Normal, 1:Abnormal(Fail or n
o
assembl
y)
1-
651 W/B Initialize 1-
652 Gain ad
j
ustment of RGB am
p
lifier
(
FLAON) Main - -
653 Gain ad
j
ustment of RGB am
p
lifie
r
Sub - -
654 Automatic White Peak Ad
j
in
g
le Picture mod
e
--
655 Automatic Color Level Ad
j
.
(
TB1274BF
)
Main PAL/NTSC
(
COMPOSITE) - -
656 Automatic Color Level Ad
j
.
(
TB1274BF
)
Sub PAL/NTSC
(
COMPOSITE) - -
657 Automatic White Peak Ad
j
. Multi Picture mod
e
--
658 EEPROM Initialize
(
0:No, 1:Yes
)
10
659 Enter to SUB ad
j
ust menu --
660 Enter to service menu of FC sub mi-con --
: shoule be adjusted
: should be followed previous data
…
…
S
1

14
PDM-4220
PDM-4220
Service adjustment items by I2C-bus control (SUB adjust menu)
(*The change to a sub menu. press "ok" key after no.659 with a main menu)
ADJ Function Max. Default
No. Value FORMATTER VIDEO TUNER PDP
ADJ. Items Mode PWB PWB PWB PANEL
0 R DRIVE1 [RF/VIDEO/DSUB-COMP] COOL 255 255
1 G DRIVE1 [RF/VIDEO/DSUB-COMP] COOL 255 255
2 B DRIVE1 [RF/VIDEO/DSUB-COMP] COOL 255 255
3 R DRIVE2 [RF/VIDEO/DSUB-COMP] NORMAL 255 255
4 G DRIVE2 [RF/VIDEO/DSUB-COMP] NORMAL 255 255
5 B DRIVE2 [RF/VIDEO/DSUB-COMP] NORMAL 255 255
6 R DRIVE3 [RF/VIDEO/DSUB-COMP] WARM 255 255
7 G DRIVE3 [RF/VIDEO/DSUB-COMP] WARM 255 255
8 B DRIVE3 [RF/VIDEO/DSUB-COMP] WARM 255 255
9 R DRIVE4 [RF/VIDEO/DSUB-COMP] BLACK & WHITE 255 255
10 G DRIVE4 [RF/VIDEO/DSUB-COMP] BLACK & WHITE 255 255
11 B DRIVE4 [RF/VIDEO/DSUB-COMP] BLACK & WHITE 255 255
12 R DRIVE1 [DVI-PC/DVI-STB/DSUB-RGB] COOL 255 255
13 G DRIVE1 [DVI-PC/DVI-STB/DSUB-RGB] COOL 255 255
14 B DRIVE1 [DVI-PC/DVI-STB/DSUB-RGB] COOL 255 255
15 R DRIVE2 [DVI-PC/DVI-STB/DSUB-RGB] NORMAL 255 255
16 G DRIVE2 [DVI-PC/DVI-STB/DSUB-RGB] NORMAL 255 255
17 B DRIVE2 [DVI-PC/DVI-STB/DSUB-RGB] NORMAL 255 255
18 R DRIVE3 [DVI-PC/DVI-STB/DSUB-RGB] WARM 255 255
19 G DRIVE3 [DVI-PC/DVI-STB/DSUB-RGB] WARM 255 255
20 B DRIVE3 [DVI-PC/DVI-STB/DSUB-RGB] WARM 255 255
21 R DRIVE4 [DVI-PC/DVI-STB/DSUB-RGB] BLACK & WHITE 255 255
22 G DRIVE4 [DVI-PC/DVI-STB/DSUB-RGB] BLACK & WHITE 255 255
23 B DRIVE4 [DVI-PC/DVI-STB/DSUB-RGB] BLACK & WHITE 255 255
24 Brightness Center (CM) NTSC/PAL/ Multi picture 254 128
25 Brightness Center (CM) Scart-RGB(50/60Hz) 254 128
26 Brightness Center (CM) 480i/576i/480p/576p 254 128
27 Brightness Center (CM) 1080i-50/60/720p 254 124
28 Brightness Center (CM) DVI-PC 254 128
29 Brightness Center (CM) DVI-STB 254 128
30 Brightness Center (CM) DSUB-RGB 254 128
31 Brightness Center (CM) Expand DSUB-RGB (Reserved) 254 128
32 Brightness Center (CM) HDMI 254 128
33 Brightness center (CM) offset AV1 254 127
34 Brightness center (CM) offset AV2 254 127
35 Brightness center (CM) offset AV3 254 127
36 Brightness center (CM) offset AV4 254 127
37 Brightness center (CM) offset AV5 254 127
38 Brightness center (CM) offset DSUB-COMP 254 127
39 Color Center (CM) SD(YCbCr)(50Hz) 127 72
40 Color Center (CM) SD(YCbCr)(60Hz) 127 68
41 Color Center (CM) Scart-RGB(50/60Hz) 127 70
42 Color Center (CM) HD(YPbPr)(50/60Hz) 127 70
43 Color Center (CM) DVI-PC 127 64
44 Color Center (CM) DVI-STB (480i/576i/480p/576p) 127 62
45 Color Center (CM) DVI-STB (1080i-50/60/720p) 127 62
46 Color Center (CM) DVI-STB (VGA) 127 62
47 Color Center (CM) DSUB-RGB 127 64
48 Tint Center (CM) PAL 254 125
49 Tint Center (CM) Scart-RGB(50Hz) 254 121
50 Tint Center (CM) Scart-RGB(60Hz) 254 120
51 Tint Center (CM) SD(YCbCr)(50Hz) 254 123
52 Tint Center (CM) SD(YCbCr)(60Hz) 254 130
53 Tint Center (CM) HD(YPbPr)(50/60Hz) 254 135
54 Tint Center (CM) DVI-PC 254 128
55 Tint Center (CM) DVI-STB (480i/576i/480p/576p) 254 128
56 Tint Center (CM) DVI-STB (1080i-50/60/720p) 254 128
57 Tint Center (CM) DVI-STB (VGA) 254 128
58 Tint Center (CM) DSUB-RGB 254 128
59 Center of Sharpness (Y-Enhancer Gain for HV) RF 31 10
60 Center of Sharpness (Y-Enhancer Gain for HV) VIDEO 31 15
61 Center of Sharpness (Y-Enhancer Gain for HV) Scart-RGB(50/60Hz) 31 14
62 Center of Sharpness (Y-Enhancer Gain for HV) 480i/576i 31 10
63 Center of Sharpness (Y-Enhancer Gain for HV) 480p/576p 31 15
64 Center of Sharpness (Y-Enhancer Gain for HV) 720p 31 6
65 Center of Sharpness (Y-Enhancer Gain for HV) 1080i-50/60 31 10
66 Center of Sharpness (Y-Enhancer Gain for HV) TEXT(for split) 31 19
67 Center of Sharpness (Y-Enhancer Gain for HV) DVI-STB (480i/576i) 31 14
68 Center of Sharpness (Y-Enhancer Gain for HV) DVI-STB (480p/576p) 31 10
69 Center of Sharpness (Y-Enhancer Gain for HV) DVI-STB (720p) 31 6
70 Center of Sharpness (Y-Enhancer Gain for HV) DVI-STB (1080i-50/60) 31 10
71 Center of Sharpness (Y-Enhancer Gain for HV) DVI-STB (VGA) 31 10
72 Contrast Center (CM) RF 254 137
73 Contrast Center (CM) AV1 254 137
74 Contrast Center (CM) AV2 254 137
75 Contrast Center (CM) AV3 254 137
76 Contrast Center (CM) AV4 254 137
77 Contrast Center (CM) AV5 254 137
78 Contrast Center (CM) DVI-PC 254 128
79 Contrast Center (CM) DVI-STB (With Setup) 254 149
80 Contrast Center (CM) DVI-STB (Without Setup) 254 128
81 Contrast Center (CM) DSUB-RGB 254 128
82 Contrast Center (CM) Expand DSUB-RGB (Reserved) 254 128
83 Contrast Center (CM) DSUB-COMP 254 137
84 Maximum Value of Contrast at REAL/NORMAL mode 254 188
85 Offset Value of Contrast data at SPLIT mode 120 53
86 Offset value of gain for Black Stretch function Except OFF/LOW/HIGH mode 63 32
87 Horizontal Enhance TEXT 3 3
88 Vertical Enhance TEXT 3 3
89 Horizontal filter SW [HHPF0] NTSC/480i 1 0
90 (Enhancer Gain ) [HHPF1] PAL/576i 1 0
91 [HHPF2] 480p/576p/1080i-50/60/720p 10
Changed Component
: shoule be adjusted
: should be followed previous data

15
PDM-4220
PDM-4220
ADJ Function Max. Default
No. Value FORMATTER VIDEO TUNER PDP
ADJ. Items Mode PWB PWB PWB PANEL
Changed Component
92 Horizontal Corin
g
Level
[
HECOR1
]
NTSC-RF 15 3
93
(
Enhancer Gain
)[
HECOR2
]
PAL-RF
/
Multi
p
icture 15 2
94
[
HECOR3
]
NTSC-VIDEO 15 1
95
[
HECOR4
]
PAL-VIDEO 15 1
96
[
HECOR5'
]
Scart-RGB
(
50/60Hz
)
15 15
97
[
HECOR5
]
480i/576i 15 2
98
[
HECOR6
]
480
p
/576
p
15 1
99
[
HECOR7
]
1080i-50/60/720
p
15 1
100
[
HECORPC
]
PC 15 1
101 Vertical Corin
g
Level
[
VECOR1
]
NTSC-RF 15 1
102
(
Enhancer Gain
)[
VECOR2
]
PAL-RF
/
Multi
p
icture 15 8
103
[
VECOR3
]
NTSC-VIDEO 15 1
104
[
VECOR4
]
PAL-VIDEO 15 1
105
[
VECOR5'
]
Scart-RGB
(
50/60Hz
)
15 15
106
[
VECOR5
]
480i/576i 15 0
107
[
VECOR6
]
480
p
/576
p
15 15
108
[
VECOR7
]
1080i-50/60/720
p
15 15
109
[
VECORPC
]
PC 15 0
110 Enhancer
g
ain of VH for
C
TEXT 31 0
111 Corin
g
Am
p
litude for Y/G
[
YC0R0
]
NTSC/PAL-RF
/
Multi
p
icture 7 7
112
[
YC0R1
]
NTSC/PAL-VIDEO 7 5
113
[
YC0R2
]
480i/576i/Scart-RGB
(
50/60Hz
)
74
114
[
YC0R3
]
480
p
/576
p
71
115
[
YC0R4
]
1080i-50/60/720
p
71
116
[
YC0R5
]
NTSC/PAL S-in
p
ut 7 4
117 Corin
g
Am
p
litube for B-Y/B,R-Y/R
[
CC0R0
]
NTSC/PAL/480i/576i/ Multi
p
icture 7 1
118
[
CC0R1
]
480
p
/576
p
/1080i-50/60/720
p
71
119 YFRNR in
p
ut Gain
(
Main
)
2
p
ictures
[
MYNRG0
]
HD-exce
p
t HD 7 1
120 HD-NTSC, HD-PAL
(
sub
)[
MYNRG1
]
HD-HD 7 4
121 4
p
ictures
[
MYNRG2
]
NT-* /PAL-* 7 1
122
[
MYNRG3
]
HD-* 7 4
123 YFRNR in
p
ut Gain
(
Sub
)[
YCNRG0
]
2
p
ictures 7 4
124
[
YCNRG1
]
4
p
ictures/12
p
ictures 7 1
125 CFRNR in
p
ut Gain
(
Main
)
2
p
ictures
[
MCNRG0
]
HD-exce
p
t HD 7 3
126 HD-NTSC, HD-PAL
(
SUB
)[
MCNRG1
]
HD-HD 7 4
127
[
MCNRG2
]
NT-* /PAL-* 7 4
128
[
MCNRG3
]
HD-* 7 4
129 CFRNR in
p
ut Gain
(
Sub
)[
SCNRG0
]
2
p
ictures 7 3
130
[
SCNRG1
]
4
p
ictures/12
p
ictures 7 4
131 Vertical Enhancer Gain for Y/G
[
YVEG0
]
NTSC/PAL
(
-exce
p
t RF
)
/480i/576i 15 15
132
[
YVEG1
]
480
p
/576
p
15 4
133
[
YVEG2
]
1080i-50/60/720
p
15 15
134
[
YVEG3
]
PAL
(
-RF
)
/ Multi
p
icture 15 15
135 Vertical DSB Gain for Y/G
[
YVDSBG0
]
NTSC/PAL/480i/576i/ Multi
p
icture 3 3
136
[
YVDSBG1
]
480
p
/576
p
30
137
[
YVDSBG2
]
1080i-50/60/720
p
32
138 Vertical DSB Corin
g
for Y/G
[
YVDSBC0
]
NTSC/PAL/480i/576i/ Multi
p
icture 7 7
139
[
YVDSBC1
]
480
p
/576
p
/1080i-50/60/720
p
70
140 Vertical Enhancer Cli
p
for Y/G 0:LTI
[
YVECLP0
]
NTSC/PAL/480i/576i/ Multi
p
icture 1 1
141
[
YVECLP1
]
480
p
/576
p
/1080i-50/60/720
p
10
142 Vertical Cli
p
Offset Level
[
YVECLPL0
]
NTSC/PAL/480i/576i/ Multi
p
icture 15 15
143
[
YVECLPL1
]
480
p
/576
p
/1080i-50/60/720
p
15 8
144 Vertical Non Linear Peakin
g
for Y/G
[
YVNLP0
]
NTSC/PAL/480i/576i/ Multi
p
icture 63 0
145
[
YVNLP1
]
480
p
/576
p
/1080i-50/60/720
p
63 0
146 Horizontal Enhancer Gain for Y/R
[
YHEG0
]
NTSC/PAL
(
-exce
p
t RF
)
/480i/576i 15 15
147
[
YHEG1
]
480
p
/576
p
15 15
148
[
YHEG2
]
15
149
[
YHEG3
]
PAL
(
-RF
)
/ Multi
p
icture 15 15
150 Horizontal DSB Gain for Y/R
[
YHDSBG0
]
NTSC/PAL/480i/576i/ Multi
p
icture 3 2
151
[
YHDSBG1
]
480
p
/576
p
30
152
[
YHDSBG2
]
1080i-50/60/720
p
32
153 Horizontal DSB Corin
g
for Y/R
[
YHDSBC0
]
NTSC/PAL/480i/576i/ Multi
p
icture 7 7
154
[
YHDSBC1
]
480
p
/576
p
/1080i-50/60/720
p
77
155 Horizontal Enhancer Cli
p
for Y/R 0:LTI
[
YHDSBC0
]
NTSC/PAL/480i/576i/ Multi
p
icture 1 0
156
[
YHDSBC1
]
480
p
/576
p
/1080i-50/60/720
p
10
157 Horizontal Cli
p
Offset Level for Y/R
[
YHECLPL0
]
RF/ Multi
p
icture 15 4
158
[
YHECLPL1
]
NTSC/PAL-VIDEO 15 4
159
[
YHECLPL3
]
480i/576i/Scart-RGB
(
50/60Hz
)
15 10
160
[
YHECLPL2
]
480
p
/576
p
/1080i-50/60/720
p
15 1
161 Horizontal Non Linear Peakin
g
for Y/G
[
YHNLP0
]
NTSC/PAL/480i/576i/ Multi
p
icture 63 0
162
[
YHNLP1
]
480
p
/576
p
/1080i-50/60/720
p
63 0
163 Horizontal HPF Peak Fre
q
. SW for Y/R
[
YHHPF0
]
NTSC/PAL/480i/576i/ Multi
p
icture 3 2
164
[
YHHPF1
]
480
p
/576
p
32
165
[
YHHPF2
]
1080i-50/60/720
p
32
166 Initial value of Contrast Extend 1 of Panel Life function 127 93
167 Interval time of correction time Extend 1 of Panel Life function 127 10
168 Additional value of Contrast Extend 1 of Panel Life function 127 1
169 Initial value of Contrast Extend 2 of Panel Life function 127 63
170 Interval time of correction time Extend 2 of Panel Life function 127 6
171 Additional value of Contrast Extend 2 of Panel Life function 127 1
172 Menu Init. Contrast
(
-31
[
0
]
+40
[
71
])
For D
y
namic 71 62
173 Menu Init. Contrast
(
-31
[
0
]
+40
[
71
])
For Natural 71 62
174 Menu Init. Contrast
(
-31
[
0
]
+40
[
71
])
For Cinema 71 51
175 Menu Init. Bri
g
htness
(
-31
[
0
]
+31
[
62
])
For D
y
namic 62 31
176 Menu Init. Bri
g
htness
(
-31
[
0
]
+31
[
62
])
For Natural 62 31
177 Menu Init. Bri
g
htness
(
-31
[
0
]
+31
[
62
])
For Cinema 62 33
178 Menu Init. Color
(
-31
[
0
]
+31
[
62
])
For D
y
namic 62 36
179 Menu Init. Color
(
-31
[
0
]
+31
[
62
])
For Natural 62 31
180 Menu Init. Color
(
-31
[
0
]
+31
[
62
])
For Cinema 62 21
181 Menu Init. Shar
p
ness
(
-15
[
0
]
+15
[
30
])
For D
y
namic 30 20
182 Menu Init. Shar
p
ness
(
-15
[
0
]
+15
[
30
])
For Natural 30 15
183 Menu Init. Shar
p
ness
(
-15
[
0
]
+15
[
30
])
For Cinema 30 10
1080i-50/60/720p-60 15
: shoule be adjusted
: should be followed previous data
~
~
~
~
~
~~
~
~
~
~
~

16
PDM-4220
PDM-4220
ADJ Function Max. Default
No. Value FORMATTER VIDEO TUNER PDP
ADJ. Items Mode PWB PWB PWB PANEL
Changed Component
184 Menu Init. Color Tem
p
.
(
Cool
[
0
]
/Normal
[
1
]
/Warm
[
2
]
/B&W
[
3
])
For D
y
namic 3 0
185 Menu Init. Color Tem
p
.
(
Cool
[
0
]
/Normal
[
1
]
/Warm
[
2
]
/B&W
[
3
])
For Natural 3 1
186 Menu Init. Color Tem
p
.
(
Cool
[
0
]
/Normal
[
1
]
/Warm
[
2
]
/B&W
[
3
])
For Cinema 3 2
187 Menu Init. Black stretch
(
Off
[
0
]
/Low
[
1
]
/Mid.
[
2
]
/Hi
g
h
[
3
])
For D
y
namic 3 2
188 Menu Init. Black stretch
(
Off
[
0
]
/Low
[
1
]
/Mid.
[
2
]
/Hi
g
h
[
3
])
For Natural 3 1
189 Menu Init. Black stretch
(
Off
[
0
]
/Low
[
1
]
/Mid.
[
2
]
/Hi
g
h
[
3
])
For Cinema 3 0
190 Menu Init. YNR
(
Off
[
0
]
/Low
[
1
]
/Hi
g
h
[
2
])
For D
y
namic 2 0
191 Menu Init. YNR
(
Off
[
0
]
/Low
[
1
]
/Hi
g
h
[
2
])
For Natural 2 0
192 Menu Init. YNR
(
Off
[
0
]
/Low
[
1
]
/Hi
g
h
[
2
])
For Cinema 2 0
193 Menu Init. LTI
(
Off
[
0
]
/Low
[
1
]
/Mid.
[
2
]
/Hi
g
h
[
3
])
For D
y
namic 3 2
194 Menu Init. LTI
(
Off
[
0
]
/Low
[
1
]
/Mid.
[
2
]
/Hi
g
h
[
3
])
For Natural 3 1
195 Menu Init. LTI
(
Off
[
0
]
/Low
[
1
]
/Mid.
[
2
]
/Hi
g
h
[
3
])
For Cinema 3 0
196 Center of Shar
p
ness
(
HV Enhancer Gain for Y) HDMI
(
480i/576i
)
31 10
197 Center of Shar
p
ness
(
HV Enhancer Gain for Y) HDMI
(
480
p
/576
p)
31 10
198 Center of Shar
p
ness
(
HV Enhancer Gain for Y) HDMI
(
720
p)
31 6
199 Center of Shar
p
ness
(
HV Enhancer Gain for Y) HDMI
(
1080i-50/60
)
31
200 Center of Shar
p
ness
(
HV Enhancer Gain for Y) HDMI
(
VGA
)
31 10
201 Color Center
(
CM
)
HDMI-YCbCr
(
50Hz:576i/576
p)
127 65
202 Color Center
(
CM
)
HDMI-YCbCr
(
60Hz:480i/480
p)
127 65
203 Color Center
(
CM
)
HDMI-YPbPr
(
1080i-50/60/720
p)
127 65
204 Tint Center
(
CM
)
HDMI-YCbCr
(
50Hz:576i/576
p)
254 126
205 Tint Center
(
CM
)
HDMI-YCbCr
(
60Hz:480i/480
p)
254 126
206 Tint Center
(
CM
)
HDMI-YPbPr
(
1080i-50/60/720
p)
254 126
207 Shar
p
ness Gain
(
RF
)
BG/DK/I Main 15 8
208 Shar
p
ness Gain
(
RF
)
M Main 15 8
209 Shar
p
ness Gain
(
RF
)L
Main 15 8
210 Shar
p
ness Gain
(
RF
)
L' Main 15 8
211 Shar
p
ness Gain
(
VIDEO
)
PA
L
Main 15 10
212 Shar
p
ness Gain
(
VIDEO
)
NTSC3.58 Main 15 10
213 Shar
p
ness Gain
(
VIDEO
)
SECAM,B/W Main 15 8
214 Shar
p
ness Gain
(
VIDEO
)
NTSC4.43 Main 15 8
215 Shar
p
ness Gain
(
VIDEO
)
N-PA
L
Main 15 8
216 Shar
p
ness Gain
(
VIDEO
)
M-PA
L
Main 15 8
217 Sharpness Gain(S.VIDEO) Main 15 7
15218 Horizontal HPF Peak Frequency 720p-50 5
6
Factory Reset
After all of the adjustments of main chassis are finished, perform FACTORY RESET.
Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for
more than 5 seconds.
The unit is set to factory settings.
: shoule be adjusted
: should be followed previous data

17
PDM-4220
PDM-4220
Item Power Unit Vs, Va Adjustment
Applicable Model All models
Preparation Procedure
(1) Turn on the set and perform
pre-heat run more than 1 min
on burn-in screen.
(1) Turn Vs ADJ to adjust Vs voltage
to be within ±0.1V of the value
specified in the label on the panel.
Adjust within ±1V at Vs1
Adjust within ±0.1V at Vs2
(2) Receive full back pattern signal
(or Video silence signal;
but it will be automatically turned off
after a few seconds by power save function.)
(2) Turn Va ADJ to adjust Va voltage
to be within ±0.2V of the value specified
in the label on the panel.
Adjust within ±1V at Va1
Adjust within ±0.2V at Va2
(3) Connect voltmeter leads to Vs
(or Va) and GND test points of the power unit. (3)
Label example
<LOT>N6
Vs= 80.0V Va=60.0V
Vw=140.0V Vx=60.0V
Power
Supply
Unit X-sus
Y-sus
(Rear View)
Panel Module
Label
Reconfirm that Vs voltage remains within
±0.1V of the specified value.
Readjust if itís outside of the margin.
n
iP tseT
aV /
sV 99N
CsVaV DNG
RVtnemtsujdaesraocsV:1sV
RVtnemtsujdaenifsV:2sV
RVtnemtsujdaenifaV:2aV
R
V
t
n
em
tsuj
da e
sra
o
caV
:1
a
V
5147FPMataruM **
**
*
**
*N/
S
MADE IN THAILAND

18
PDM-4220
PDM-4220
Item
Applicable Model All models
Preparation Procedure
(1) Input 576p or 480p adjustment signal
into AV4 terminal.
(1) Receive 576p or 480p adjustment signal on AV4
terminal input.
Indicate Service Adjustment Menu.
(2)
(3)
Select No.652 (RGB amplitude gain adjustment
Main) of Service Adjustment Menu.
Press [OK] key more than 2 seconds to start the
automatic adjustment.
The adjustment completes when the indication
[Auto Mode] at the bottom of the screen
disappears.
[Note] Never adjust without use of the specified signal.
If that were done by mistake, the picture would become abnormal in black level, contrast and color.
In this case, it will be recovered by re-adjustment in the specified way.
Black pattern: Set pedestal level.
Characters must not be inserted
into this signal.
Black White
0.7V
RGB Amplitude Adjustment (Main/Sub)
Select No.653 (RGB amplitude gain adjustment
Sub) of Service Adjustment Menu.
Press [OK] key more than 2 seconds to start the
automatic adjustment.
The adjustment completes when the indication
[Auto Mode] at the bottom of the screen
disappears.
[Note] Never adjust without use of the specified signal.
If that were done by mistake, the picture would become abnormal in black level, contrast and color.
In this case, it will be recovered by re-adjustment in the specified way.
Item
Applicable Model All models
Preparation Procedure
(1)
(2)
(1)
Black pattern: Set pedestal level.
Characters must not be inserted
into this signal.
Black White
0.7V
RGB Amplitude Adjustment (PC D-Sub input)
Input RGB amplitude adjustment signal of VGA
(60Hz) into RGB2 [D-sub] terminal. Receive PC signal (VGA [60Hz]), and indicate
Service Adjustment Menu.(Main)
Select No.652 of Service Adjustment Menu.
Press [OK] key more than 2 seconds to start the
automatic adjustment.
The adjustment completes when the OSD
reappears.

19
PDM-4220
PDM-4220
Item
Applicable Model All models
(1) (1)
(2)
(3)(3)
(4) (4)
Video Color Temperature Adjustment (Cool)
Set the signal generator output as All White.
Picture Menu is set as [RESET].
After receiving the video signal, step down the two
(or one) among adjustment No. 0, 1, 2 and adjust
the values as shown below.
Note)
At least one of the data shoud be 255.
Ensure that the service adjustment
menu (sub menu) No. 0, 1, 2, are all set as 255.
Confirm that the mode is set as Factory
Adjustment mode.
Perform the following adjustment with the remote
control
Set the CRT color analyzer (CA100) at the center
of the panel.
Component signal (480i)
Video level : 0.700Vp-p
Sync level : 0.300Vp-p
Setup level : 0V
Adjustment Preparations Adjustment Procedures
(2)
Specification
Video color temperature (Cool)
x=0.258±0.005
y=0.273±0.005

20
PDM-4220
PDM-4220
Item
Applicable Model All models
Preparation Procedure
(1) Set signal generator output as
All White (Window ratio: 100%). (1)
(2) Component signal (480i)
Video level : 0.700Vp-p
Sync level : 0.300Vp-p
Setup level : 0V
(2)
<Specification>
Video color Color temperature (Normal)
x=0.285 0.005
y=0.293 0.005
(3)
(4)
Check that Picture Menu is set as [RESET]
mode.
(3)
(4)
Video Color Temperature Adjustment (Normal)
Perform the following adjustment with the remote
control.
Set the CRT Color Analyzer (CA-100) at the center
of the panel.
Ensure that service adjustment
menu (sub) No. 3, 4, 5 are all set as 255.
After receiving the video signal, step down
the two (or one) among adjustment No. 3, 4, 5 and
adjust the values as shown below.
(Note)
At least one of the data should be 255.
Item
Applicable Model All models
Preparation Procedure
(1) Set signal generator output as
All White (Window ratio: 100%). (1)
(2) Component signal (480i)
Video level : 0.700Vp-p
Sync level : 0.300Vp-p
Setup level : 0V
(2)
<Specification>
Video color Color temperature (Warm)
x=0.314 0.005
y=0.327 0.005
(3)
(4)
Check that Picture Menu is set as [RESET]
mode.
(3)
(4)
Video Color Temperature Adjustment (Warm)
Perform the following adjustment with the remote
control.
Set the CRT Color Analyzer (CA100) at the center
of the panel.
Ensure that service adjustment
menu (submenu) No. 6, 7, 8 are all set as 255.
After receiving the video signal, step down
the two (or one) among adjustment No. 6, 7, 8 and
adjust the values as shown below.
(Note)
At least one of the data should be 255.
Set into Factory Adjustment mode.
Set into Factory Adjustment mode.