Yamaha RX-V573 User manual

101236
SERVICE MANUAL
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known
and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise
all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or
the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
AV RECEIVER
RX-V573/HTR-5065
P.O.Box 1, Hamamatsu, Japan
■CONTENTS
TO SERVICE PERSONNEL ............................................2
FRONT PANELS .............................................................3
REAR PANELS ...........................................................4–7
REMOTE CONTROL PANEL ..........................................8
SPECIFICATIONS / 参考仕様 ................................... 9–14
INTERNAL VIEW .......................................................... 15
SERVICE PRECAUTIONS / サービス時の注意事項 ..... 15
DISASSEMBLY PROCEDURES / 分解手順 ........... 16–18
UPDATING FIRMWARE /
ファームウェアのアップデート .............................. 19–20
SELF-DIAGNOSTIC FUNCTION /
ダイアグ（自己診断機能）
.......................................21–50
POWER AMPLIFIER ADJUSTMENT /
パワーアンプ調整 ..........................................................51
DISPLAY DATA .......................................................52–53
IC DATA ...................................................................54–73
BLOCK DIAGRAMS ................................................ 74–75
PRINTED CIRCUIT BOARDS ................................. 76–89
PIN CONNECTION DIAGRAMS ...................................90
SCHEMATIC DIAGRAMS .....................................91–100
REPLACEMENT PARTS LIST .............................101–115
REMOTE CONTROL ............................................116–118
CONFIGURING THE SYSTEM SETTINGS ................. 119
システム設定を変更する
............................................. 120
FIRMWARE UPDATING PROCEDURE .............. 121–126
ファームウェア更新手順
..................................... 127–132
'12.04
Copyright © 2012 All rights reserved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
Note: When the following parts are replaced, the model name MUST be written to the back-up IC (EEPROM: IC22 on
DIGITAL P.C.B.) to have proper operation. (For details, refer to “S5. SOFT SWITCH” menu of the self-diagnostic
function.)
注意：
下記の部品を交換した場合、正常動作のためにモデル名をバックアップ IC（EEPROM：DIGITALP.C.B. の IC22）へ
書き込む必要があります。（詳細は、ダイアグの “S5.SOFTSWITCH” メニューを参照してください。）
• DIGITAL P.C.B.
• EEPROM: IC22 on DIGITAL P.C.B.
RX-V573/HTR-5065

This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive
harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON
WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or
expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
1. Critical Components Information
Components having special characteristics are marked ⚠and
must be replaced with parts having specifications equal to those
originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated
from supply circuits.
• Meter impedance should be equivalent to 1500 ohms shunted
by 0.15 μF.
■TO SERVICE PERSONNEL
• Leakage current must not exceed 0.5mA.
• Be sure to test for leakage with the AC plug in both polarities.
WARNING: CHEMICAL CONTENT NOTICE!
For U model
“CAUTION”
“F5402: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 6A,
125V FUSE.”
For C model
CAUTION
F5402: REPLACE WITH SAME TYPE 6A, 125V FUSE.
ATTENTION
F5402: UTILISER UN FUSIBLE DE RECHANGE DE MÉME TYPE DE 6A, 125V.
WALL
OUTLET EQUIPMENT UNDER TEST
AC LEAKAGE
TESTER OR
EQUIVALENT
INSULATING
TABLE
本機に搭載されているすべての基板およびハンダ付けに
よる接合部は無鉛ハンダでハンダ付けされています。
無鉛ハンダにはいくつかの種類がありますが、修理時に
は下記のような無鉛ハンダの使用を推奨します。
󱾁 Sn+Ag+Cu（錫+銀+銅）
󱾁 Sn+Cu（錫 + 銅）
󱾁 Sn+Zn+Bi（錫 + 亜鉛 + ビスマス）
注意：
無鉛ハンダの融点温度は通常の鉛入りハンダに比べ 30 〜
40℃程度高くなっていますので、それぞれのハンダに合っ
たハンダごてをご使用ください。
All of the P.C.B.s installed in this unit and solder joints are
soldered using the lead free solder.
Among some types of lead free solder currently available,
it is recommended to use one of the following types for
the repair work.
• Sn + Ag + Cu (tin + silver + copper)
• Sn + Cu (tin + copper)
• Sn + Zn + Bi (tin + zinc + bismuth)
Caution:
As the melting point temperature of the lead free solder
is about 30°C to 40°C (50°F to 70°F) higher than that of
the lead solder, be sure to use a soldering iron suitable
to each solder.
About lead free solder / 無鉛ハンダについて
2
RX-V573/HTR-5065
RX-V573/HTR-5065

■FRONT PANELS
RX-V573
HTR-5065
U, C, R, T, K, A, B, G, F, L models
J model
3
RX-V573/HTR-5065
RX-V573/HTR-5065

■REAR PANELS
RX-V573 (U, C models)
RX-V573 (R model)
RX-V573 (T model)
4
RX-V573/HTR-5065
RX-V573/HTR-5065

RX-V573 (K model)
RX-V573 (A model)
RX-V573 (B, G, F models)
5
RX-V573/HTR-5065
RX-V573/HTR-5065

RX-V573 (L model)
RX-V573 (J model)
6
RX-V573/HTR-5065
RX-V573/HTR-5065

HTR-5065 (U model)
HTR-5065 (F model)
7
RX-V573/HTR-5065
RX-V573/HTR-5065

■REMOTE CONTROL PANEL
RAV465
Remote control sheet
(T model)
8
RX-V573/HTR-5065
RX-V573/HTR-5065

■Audio Section / オーディオ部
Rated Output Power (Power Amplifier Section) /
定格出力（パワーアンプ部）
(1 kHz, 0.9 % THD)
– 1 channel driven –
U, C models (8 ohms)
FRONT L/R ................................................................ 115 W/ch
CENTER .......................................................................... 115 W
SURROUND L/R ........................................................ 115 W/ch
SURROUND BACK L/R ............................................. 115 W/ch
R, T, K, A, B, G, F, L, J models (6 ohms)
FRONT L/R ................................................................ 115 W/ch
CENTER .......................................................................... 115 W
SURROUND L/R ........................................................ 115 W/ch
SURROUND BACK L/R ............................................. 115 W/ch
– 2 channels driven simultaneously –
U, C models (8 ohms)
FRONT L/R ...........................................................95 W + 95 W
CENTER ............................................................................ 95 W
SURROUND L/R ...................................................95 W + 95 W
SURROUND BACK L/R ........................................95 W + 95 W
(20 Hz to 20 kHz, 0.09 % THD)
– 2 channels driven simultaneously –
U, C models (8 ohms)
FRONT L/R ...........................................................80 W + 80 W
R, T, K, A, B, G, F, L, J models (6 ohms)
FRONT L/R ...........................................................80 W + 80 W
Maximum Effective Output Power / 実用最大出力 (JEITA)
(1 kHz, 10 % THD, 6 ohms / 1 channel driven)
[R, T, K, L J models]
FRONT L/R ......................................................................... 135 W/ch
CENTER .................................................................................. 135 W
SURROUND L/R ................................................................ 135 W/ch
SURROUND BACK L/R ..................................................... 135 W/ch
Dynamic Power Per Channel / ダイナミックパワー (IHF)
FRONT L/R drive
U, C models
(8 / 6 / 4 ohms) ................................................ 110 / 130 / 160 W
R, T, K, A, B, G, F, L, J models
(6 / 4 ohms) .............................................................. 110 / 130 W
Dynamic Headroom [U, C models]
8 ohms ....................................................................................0.2 dB
Damping Factor / ダンピングファクター (20 Hz to 20 kHz, 8 ohms)
FRONT L/R to SPEAKER-A ............................................120 or more
Input Sensitivity/Input Impedance / 入力感度／入力インピーダンス
(1 kHz, 100 W/8 ohms)
AV5 etc. ............................................................ 200 mV / 47 k-ohms
Maximum Input Signal / 最大許容入力 (1 kHz, 0.5 % THD)
AV5 etc. (EFFECT ON) .............................................................. 2.3 V
Output Level/Output Impedance / 出力電圧／出力インピーダンス
AV OUT ............................................................ 200 mV / 1.2 k-ohms
SUBWOOFER (2 ch stereo and FRONT SP: small)
............................................................................. 1 V / 1.2 k-ohms
Headphone Jack Rated Output/Output Impedance /
ヘッドホン出力／出力インピーダンス (1 kHz, 50 mV, 8 ohms)
AV5 etc. input ..................................................... 100 mV / 470 ohms
■SPECIFICATIONS /
参考仕様
Frequency Response / 再生周波数帯域 (10 Hz to 100 kHz)
AV5 etc., FRONT ..................................................................0 / -3 dB
Signal to Noise Ratio / 信号対雑音比 (IHF-A network)
AV5, etc. (PURE DIRECT) to SP OUT (Input shorted 250 mV)
.............................................................................. 100 dB or more
Residual Noise / 残留ノイズ (IHF-A Network)
FRONT L/R to SP OUT ................................................150 μV or less
Channel Separation / チャンネルセパレーション
AV5, etc. (Input 5.1 k-ohms shorted)
1 kHz / 10 kHz ............................... 60 dB or more / 45 dB or more
Volume Control / 可変範囲／ステップ
......................................... MUTE / -80 dB to +16.5 dB / 0.5 dB step
Tone Control Characteristics / トーンコントロール特性
FRONT L/R
Bass
Boost/Cut ...................................... ±6 dB / 0.5 dB step, at 50 Hz
Turnover frequency ..........................................................350 Hz
Treble
Boost/Cut .....................................±6 dB / 0.5 dB step, at 20 kHz
Turnover frequency ......................................................... 3.5 kHz
Filter Characteristics / フィルタ特性
FRONT, CENTER, SURROUND, SURROUND BACK small (H.P.F.)
.................... fc=40/60/80/90/100/110/120/160/200 Hz, 12 dB/oct.
SUBWOOFER small (L.P.F.)
.................... fc=40/60/80/90/100/110/120/160/200 Hz, 24 dB/oct.
Optical Jack, Coaxial Jack Support Frequencies /
Optical 端子、Coaxial 端子対応 fs
...............................................................................32 kHz to 96 kHz
■Video Section / ビデオ部
Video Signal Type / ビデオ信号方式
U, C, R, K, J models ................................................................NTSC
T, A, B, G, F, L models ................................................................ PAL
Composite Video Signal Level / コンポジットビデオ信号
...............................................................................1 Vp-p / 75 ohms
Component Video Signal Level / コンポーネントビデオ信号
Y .............................................................................1 Vp-p / 75 ohms
Pb/Pr ...................................................................0.7 Vp-p / 75 ohms
Video Maximum Input Level / ビデオ最大許容入力
(VIDEO Conversion Off)
............................................................................... 1.5 Vp-p or more
Video Signal to Noise Ratio / ビデオ信号対雑音比
................................................................................... 50 dB or more
Monitor Out Frequency Response / モニター出力周波数帯域
(VIDEO Conversion Off)
Component video signal level /コンポーネントビデオ信号
....................................................................5 Hz to 60 MHz, -3 dB
D4 video signal / D4 ビデオ信号 [J model]
.....................................................................5 Hz to 60 MHz, -3 dB
9
RX-V573/HTR-5065
RX-V573/HTR-5065

U .......................U.S.A. model
C .................Canadian model
R ....................General model
T .................... Chinese model
K .....................Korean model
A ................Australian model
B ......................British model
G .................European model
F .................... Russian model
L .................Singapore model
J .................. Japanese model
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and
the double-D symbol are trademarks of Dolby Laboratories.
ドルビーラボラトリーズからの実施権に基づき製造されています。「ドルビー」、
「ProLogic」およびダブル D 記号 はドルビーラボラトリーズの商標です。
DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered
trademarks & DTS-HD Master Audio is a trademark of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
DTS-HD および記号は DTS 社の登録商標です。また、DTS-HDMasterAudio は
DTS 社の商標です。製品にはソフトウェアを含みます。著作権 DTS 社。不許複製。
■FM Section / FM部
Tuning Range / 受信周波数範囲
U, C models .........................................................87.5 to 107.9 MHz
R, L models ......................87.5 to 108.0 MHz / 87.50 to 108.00 MHz
T, K, A, B, G, F models .................................... 87.50 to 108.00 MHz
J model ..................................................................76.0 to 90.0 MHz
50 dB Quieting Sensitivity / 50dBSN 感度 (IHF)
(1 kHz, 100 % MOD.)
Mono ......................................................................... 3 μV (20.8 dBf)
Signal to Noise Ratio / 信号対雑音比 (IHF)
Mono ........................................................................................71 dB
Stereo ......................................................................................69 dB
Harmonic Distortion / 歪率 (1 kHz)
Mono ........................................................................................ 0.3 %
Stereo ...................................................................................... 0.5 %
Antenna Input / アンテナ入力
....................................................................... 75 ohms unbalanced
■AM Section / AM部
Tuning Range / 受信周波数範囲
U, C models ........................................................... 530 to 1,710 kHz
R, L models ..............................530 to 1,710 kHz / 531 to 1,611 kHz
T, K, A, B, G, F, J models ....................................... 531 to 1,611 kHz
Antenna / アンテナ
..................................................................................... Loop antenna
■General / 総合
Power Supply / 電源電圧
U, C models ............................................................ AC 120 V, 60 Hz
R model .......................................AC 110–120/220–240 V, 50/60 Hz
T model ................................................................... AC 220 V, 50 Hz
K model .................................................................. AC 220 V, 60 Hz
A model .................................................................. AC 240 V, 50 Hz
B, G, F models ........................................................ AC 230 V, 50 Hz
L model ...................................................... AC 220–240 V, 50/60 Hz
J model .............................................................. AC 100 V, 50/60 Hz
Power Consumption / 消費電力
U, C models ..............................................................270 W / 320 VA
R, T, K, A, B, G, F, L models .................................................... 280 W
J model ................................................................................... 175 W
Standby Power Consumption (reference data) /
待機時消費電力（参考値）
HDMI control: OFF / Standby through: OFF .................0.1 W or less
HDMI control: ON / Standby through: ON
INPUT: HDMI1 (HDMI no signal)
............................................................................. 1.0 W (typical)
Network standby: ON ................................................ 2.0 W (typical)
Dimensions (W x H x D) / 寸法（幅 × 高さ × 奥行き）
............................... 435 x 161 x 315 mm (17-1/8" x 6-3/8" x 12-3/8")
Weight / 質量
............................................................................... 8.2 kg (18.1 lbs.)
Finish / 仕上げ
[RX-V573]
T model ..........................................................................Gold color
U, C, R, T, K, A, B, G, F, L, J models ............................ Black color
R, K, B, G, F, L models .............................................Titanium color
[HTR-5065]
U, F models .................................................................. Black color
Accessories / 付属品
Remote control ..............................................................................x 1
Battery (R03, AAA, UM-4) .............................................................x 2
FM antenna (1.4 m) ......................................................................x 1
AM antenna (1.0 m) ......................................................................x 1
YPAO microphone (6.0 m) ............................................................x 1
Remote control sheet (T model) ...................................................x 1
*Specifications are subject to change without notice.
※ 参考仕様および外観は、製品の改良のため予告なく変更すること
があります。
AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
AirPlay、AirPlay ロゴ、iPad、iPhone、iPod、iPodnano、iPodtouch は、 米国
およびその他の国々で登録されている AppleInc. の商標です。
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
MPEGLayer3 音声圧縮技術は FraunhoferIIS および Thomson によってライセン
ス供与されています。
10
RX-V573/HTR-5065
RX-V573/HTR-5065

315 (12-3/8") 275 (10-7/8") 22
(7/8")
18
(3/4")
435 (17-1/8")
161 (6-3/8") 140 (5-1/2")
21
(7/8")
ø 60
170 (6-5/8") 47
(1-7/8")
58
(2-1/4")
335 (13-1/4")
50
(2")
Top view
Front view
“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are
trademarks, or registered trademarks of HDMI Licensing LLC.
HDMI、HDMI ロゴ、および High-DefinitionMultimediaInterface は、HDMI
Licensing,LLC の商標または登録商標です。
Windows is a registered trademark of Microsoft Corporation in the United
States and other countries.
Windows は米国 MicrosoftCorporation の米国およびその他の国における登録商
標です。
Windows XP, Windows Vista, Windows 7, Windows Media Audio, Windows
Media Connect and Windows Media Player are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or other
countries.
WindowsXP、WindowsVista、Windows7、WindowsMediaAudio、Windows
MediaConnect、WindowsMediaplayer は、米国 MicrosoftCorporation の米
国およびその他の国における登録商標、または商標です。
DLNA™ and DLNA CERTIFIED™ are trademarks or registered trademarks
of Digital Living Network Alliance. All rights reserved. Unauthorized use is
strictly prohibited.
DLNA ™および DLNACERTIFIED ™はデジタルリビングネットワークアライアン
スの登録商標です。無断使用は固く禁じられています。
“SILENT CINEMA” is a trademark of Yamaha Corporation.
「サイレントシネマ™ SILENTCINEMA™」はヤマハ株式会社の登録商標です。
“x.v.Color” is a trademark of Sony Corporation.
「x.v.Color」は、ソニー株式会社の商標です。
This receiver supports network connections.
本機はネットワーク接続に対応しています。
AAC ロゴマーク はドルビーラボラトリーズの商標です。
•DIMENSIONS
Unit: mm (inch)
単位：mm（インチ）
11
RX-V573/HTR-5065
RX-V573/HTR-5065

•SELECT MENU
Sound Field Effects (CINEMA DSP)
*1 Decode Type
Pro Logic
PLIIx Movie
Decode Type
PLIIx Music
PLIIx Game
Neo: 6 Cinema
Neo: 6 Music
Unit Sound Program CINEMA DSP 3D Music Enhancer
MOVIE Standard ○○
Spectacle ○○
Sci-Fi ○○
Adventure ○○
Drama ○○
Mono Movie ○○
Sports ○○
Action Game ○○
Roleplaying Game ○○
MUSIC Hall in Munich ○○
Hall in Vienna ○○
Chamber ○○
Cellar Club○○
The Roxy Theatre ○○
The Bottom Line ○○
Music Video ○○
2ch Stereo ○
7ch Stereo ○
SUR. DECODE (*1) ○
12
RX-V573/HTR-5065
RX-V573/HTR-5065

•SET MENU TABLE
MAIN
MENU SUB-MENU PARAMETER VALUE [INITIAL VALUE]
Speaker Configuration Power Amp Assign [Basic] / BI-AMP / Zone B
Subwoofer [Use] / None
Front [Small] / Large
Center [Small] / Large / None
Surround [Small] / Large / None
Surround Back Small x1 / [Small x2] / Large x1 / Large x2 / None
Crossover 40 Hz / 60 Hz / [80 Hz] / 90 Hz / 100Hz / 110 Hz / 120 Hz / 160 Hz /
200 Hz
Subwoofer Phase [Normal] / Reverse
Extra Bass [Off] / On
Distance Unit Feet / Meter
Front L 0.30 to 24.00 m, [3.00 m], 0.05 m step
Front R 1.0 to 80.0 ft, [10.0 ft], 0.2 ft step
Center 0.30 to 24.00 m, [2.60 m], 0.05 m step
1.0 to 80.0 ft, [8.6 ft], 0.2 ft step
Surround L
Surround R 0.30 to 24.00 m, [2.40 m], 0.05 m step
Surround Back L 1.0 to 80.0 ft, [8.0 ft], 0.2 ft step
Surround Back R
Subwoofer 0.30 to 24.00 m, [3.00 m], 0.05 m step
1.0 to 80.0 ft, [10.0 ft], 0.2 ft step
Level Front L -10.0 to +10.0 dB, [0.0 dB], 0.5 dB step
Front R
Center
Surround L
Surround R -10.0 to +10.0 dB, [-1.0 dB], 0.5 dB step
Surround Back L
Surround Back R
Subwoofer -10.0 to +10.0 dB, [0.0 dB], 0.5 dB step
Equalizer EQ Select PEQ / [GEQ] / Off
*“PEQ” is available only when the YPAO has been performed
“PEQ” は自動測定（YPAO）を行った場合のみ選択可能
GEQ Edit Front L 63 Hz ···········||···········
Front R 160 Hz ···········||···········
Center 400 Hz ···········||···········
Surround L 1 kHz ···········||··········· -6.0 to +6.0 dB, [0 dB], 0.5 dB step
Surround R 2.5 kHz ···········||···········
6.3 kHz ···········||···········
16 kHz ···········||···········
Test Tone [Off] / On
HDMI Configuration HDMI Control [Off] / On (U, C, R, T, K, A, B, G, F, L models), Off / [On] (J model)
Audio Output Amp Off / [On]
HDMI OUT (TV) [Off] / On
*This setting is available only when “HDMI Control” is set to “Off”.
“HDMI Control” が“Off” の場合のみ設定可能
Standby Through [Off] / On
*This setting is available only when “HDMI Control” is set to “Off”.
“HDMI Control” が“Off” の場合のみ設定可能
TV Audio Input AV1 / AV2 / AV3 / [AV4] / AV5 / AUDIO1 / AUDIO2
Standby Sync Off / On / [Auto]
ARC Off / [On]
SCENE BD / DVD Off / [On]
TV
NET [Off] / On
RADIO
13
RX-V573/HTR-5065
RX-V573/HTR-5065

MAIN
MENU SUB-MENU PARAMETER VALUE [INITIAL VALUE]
Sound DSP Parameter CINEMA DSP 3D Mode Off / [On]
Panorama [Off] / On
Center Width 0 to 7, [3]
Dimension -3 to +3, [0]
Center Image 0.0 to 1.0, [0.3]
Lipsync Select Manual / [Auto]
Adjustment 0 to 250 ms, [0 ms], 1 ms step
Volume Dynamic Range [Maximum] / Standard / Min/Auto
Max Volume -30.0 to +15.0 dB / +16.5 dB (Maximum volume), [+16.5 dB], 5.0 dB step
Initial Volume [Off] / Mute / -80.0 to +16.5 dB, 0.5 dB step
ECO Auto Power Down U, C, R, T, K, A, L, J models: [Off] / 2 hours / 4 hours / 8 hours /
12 hours
B, G, F models: Off / 2 Hours / 4 Hours / [8 Hours] / 12 Hours
ECO Mode [Off] / On
Function Input Rename Input sources: HDMI1 / HDMI2 / HDMI3 / HDMI4 / AV1 / AV2 / AV3 /
AV4 / AV5 / AV6 / AUDIO / USB / V-AUX
Input is possible to 9 characters
Input possible Character type
Capital: A to Z
Small: a to z
Figure: 0 to 9
Symbols: + , - etc.
Space
Preset name select: Blu-ray / DVD / SetTopBox / Game / TV / DVR /
CD / CD-R / Satellite / VCR / Tape / MD / PC /
iPod / HD DVD
Dimmer -4 to 0 (higher to brighten), [0]
Memory Guard [Off] / On
Network IP Address DHCP Off / [On]
IP Address xxx.xxx.xxx. x
Subnet Mask xxx.xxx.xxx. x
Default Gateway xxx.xxx.xxx. x
DNS Server (Primary) x. x. x. x
(Secondary) x. x. x. x
*This setting is available only when “DHCP” is set to “Off”.
“DHCP” が“Off” の場合のみ設定可能
MAC Address Filter [Off] / On
MAC Address 1–10 xx:xx:xx:xx:xx:xx
*This setting is available only when “MAC Address Filter” is set to “On”.
“MAC Address Filter” が“On” の場合のみ設定可能
DMC Control Disable / [Enable]
Network Standby [Off] / On
Network Name Input is possible to 15 characters
Information MAC Address xx:xx:xx:xx:xx:xx
IP Address xxx.xxx.xxx. x
Subnet Mask xxx.xxx.xxx. x
Default Gateway xxx.xxx.xxx. x
DNS Server (Primary) x. x. x. x
(Secondary) x. x. x. x
Status The connection status of the NETWORK jack
vTuner ID xxxxxxxxxxxx
Network Update Perform Update
Firmware Version x.xx
System ID xxxxxxxx
Language English (English) / Français (French) / Deutsch (German) /
(U, C, R, T, K, A, B, G, F, L models) Español (Spanish) / Рyccкий (Russian) / 中文 (Chinese)
14
RX-V573/HTR-5065
RX-V573/HTR-5065

■SERVICE PRECAUTIONS / サービス時の注意事項
Safety measures
• Some internal parts in this product contain high voltages
and are dangerous.
Be sure to take safety measures during servicing, such
as wearing insulating gloves.
• Note that the capacitors indicated below are dangerous
even after the power is turned off because an electric
charge remains and a high voltage continues to exist
there.
Before starting any repair work, connect a discharging
resistor (5 k-ohms/10 W) to the terminals of each
capacitor indicated below to discharge electricity.
The time required for discharging is about 30 seconds
per each.
C2084 and C2085 on MAIN (1) P.C.B.
C5407 on OPERATION (2) P.C.B.
For details, refer to “PRINTED CIRCUIT BOARDS”.
■INTERNAL VIEW
安全対策
・ この製品の内部には高電圧部分があり危険です。修理
の際は、絶縁性の手袋を使用するなどの安全対策を
行ってください。
・ 下記のコンデンサには電源を OFF にした後も電荷が残
り、高電圧が維持されており危険です。
修理作業前に放電用抵抗（5k Ω /10W）を下記の各コ
ンデンサの端子間に接続して放電してください。
放電所用時間は各々約 30 秒間です。
MAIN（1）P.C.B. の C2084、C2085
OPERATION（2）P.C.B. の C5407
詳しくは “PRINTEDCIRCUITBOARDS” を参照してくだ
さい。
AM/FM TUNER
MAIN (5) P.C.B. (R model)
OPERATION (2) P.C.B.
MAIN (4) P.C.B.
MAIN (1) P.C.B.
DIGITAL P.C.B.
OPERATION (3) P.C.B.
MAIN (3) P.C.B.
MAIN (2) P.C.B.
MAIN (6) P.C.B.
OPERATION (8) P.C.B.
OPERATION (4) P.C.B.
OPERATION (9) P.C.B.
POWER TRANSFORMER
OPERATION (5) P.C.B.
OPERATION (1) P.C.B.
OPERATION (6) P.C.B.
OPERATION (7) P.C.B.
Top view
Rear view
Front view
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
83 96547
13 10111214
16 1715
18
21
15
RX-V573/HTR-5065
RX-V573/HTR-5065

Fig. 1
■DISASSEMBLY PROCEDURES / 分解手順
（番号順に部品を外してください。）
AC 電源コンセントから、電源コードを抜いてください。
1. トップカバーの外し方
a. ①のネジ 4 本、②のネジ 5 本を外します。（Fig.1）
b. トップカバーの後部を持ち上げ、外します。（Fig.1）
2. フロントパネルユニットの外し方
a. ③のネジ 7 本を外し、W4761 を外します。（Fig.1）
b. CB21、CB61、CB371、CB477、CB952 を外します。（Fig.1）
c. ロックを外し、CB525 を外します。（Fig.1）
d. フック 2 箇所を外し、フロントパネルユニットを外し
ます。（Fig.1）
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Top Cover
a. Remove 4 screws (①) and 5 screws (②). (Fig. 1)
b. Lift the rear of the top cover to remove it. (Fig. 1)
2. Removal of Front Panel Unit
a. Remove 7 screws (③), and remove W4761. (Fig. 1)
b. Remove CB21, CB61, CB371, CB477 and CB952.
(Fig. 1)
c. Unlock and remove CB525. (Fig. 1)
d. Release 2 hooks on both ends and remove the front
panel unit. (Fig. 1)
Connected
接続
Connected
接続
Cable
ケーブル
Cable
ケーブル
Unlock the connector
コネクターロック解 除
Remove the cable
ケーブルを外す
Remove CB525
Connect CB525
1
1 1
2
2
Lock the connector
コネクターロック
Insert the cable
ケーブルを差し込む
1
1 1
2
2
Top cover
トップ カ バ ー
Front panel unit
フロントパネルユ ニット
CB477
CB525
CB371
CB21
CB952
CB61
W4761
DIGITAL P.C.B.
OPERATION (7) P.C.B.
OPERATION (4) P.C.B.
MAIN (6) P.C.B.
Hook
フック
Hook
フック
①
①
②
③
③
③
16
RX-V573/HTR-5065
RX-V573/HTR-5065

Fig. 3
Fig. 2
3. DIGITALP.C.B. の外し方
a. ④のネジ 2 本、⑤のネジ 5 本を外します。（Fig.3）
b. ⑥のネジ 2 本を外します。（Fig.2）
c. CB22、CB26、CB64、CB91 を外します。（Fig.2）
d. ロックを外し、CB23 〜 CB25 を外します。（Fig.2）
e. DIGITALP.C.B.を外します。ただし、DIGITALP.C.B.は
MAIN（2）P.C.B.、MAIN（3）P.C.B. に基板対基板コネクター
で直接接続されています。（Fig.2）
4. アンプユニットの外し方
a. ⑦のネジ 4 本、⑧のネジ 4 本、⑨のネジ 2 本を外し
ます。（Fig.2）
b. ⑩のネジ 3 本を外します。（Fig.3）
c. アンプユニットを外します。（Fig.2）
3. Removal of DIGITAL P.C.B.
a. Remove 2 screws (④) and 5 screws (⑤). (Fig. 3)
b. Remove 2 screws (⑥). (Fig. 2)
c. Remove CB22, CB26, CB64 and CB91. (Fig. 2)
d. Unlock and remove CB23–CB25. (Fig. 2)
e. Remove the DIGITAL P.C.B. which is connected directly
to the MAIN (2) P.C.B. and MAIN (3) P.C.B. with board-
to-board connectors. (Fig. 2)
4. Removal of AMP Unit
a. Remove 4 screws (⑦), 4 screws (⑧) and 2 screws (⑨).
(Fig. 2)
b. Remove 3 screws (⑩). (Fig. 3)
c. Remove the amp unit. (Fig. 2)
Connected
接続
Connected
接続
Cable
ケーブル
Cable
ケーブル
Unlock the connector
コネクターロック解 除
Remove the cable
ケーブルを外す
Remove CB23–CB25
Connect CB23−CB25
1
1 1
2
2
Lock the connector
コネクターロック
Insert the cable
ケーブルを差し込む
1
1 1
2
2
⑥
⑦
⑦
⑧⑧
⑧
AMP unit
アンプ ユ ニット
Board-to-board connectors
基板対基板コネクター
Board-to-board connectors
基板対基板コネクター
CB251
CB271
CB63
CB26
CB25
CB23
CB22
CB64
CB24CB91
CB62
DIGITAL P.C.B.
MAIN (3) P.C.B.
MAIN (2) P.C.B.
⑨
Rear view
④⑤
⑨
17
RX-V573/HTR-5065
RX-V573/HTR-5065

When checking the P.C.B.s:
• Place the P.C.B.s (with rear panel) upright. (Fig. 4)
• Connect the heatsink and rear panel to the chassis
with a ground lead or the like. (Fig. 4)
• Reconnect all cables (connectors) that have been
disconnected.
• When connecting the flexible flat cable, be careful
with polarity.
P.C.B. をチェックする場合には：
・ リアパネルと一緒に P.C.B. を立ち上げて置きます。
（Fig.4）
・ ヒートシンク、リアパネルをリード線等でシャーシ
に接続してください。（Fig.4）
・ 外したケーブル（コネクター）をすべて接続します。
・ フラットケーブルを接続する際、極性に注意してく
ださい。
Fig. 4
Rear panel
リアパ ネ ル
Chassis
シャーシ
Heat sink
ヒートシンク
MAIN (1) P.C.B.
Ground lead
アース線
Ground lead
アース線
18
RX-V573/HTR-5065
RX-V573/HTR-5065

When the following parts are replaced, the firmware must
be updated to the latest version.
DIGITAL P.C.B.
IC2 on DIGITAL P.C.B.
IC43 on DIGITAL P.C.B.
IC953 on DIGITAL P.C.B.
●Confirmation of firmware version and checksum
Before and after updating the firmware, check the
firmware version and checksum by using the self-
diagnostic function menu.
Start up the self-diagnostic function and select “S4.
ROM VERSION/CHECKSUM” menu.
Using the sub-menu, have the firmware version and
checksum displayed, and note them down.
(See “SELF-DIAGNOSTIC FUNCTION”)
*When the firmware version is different from
written one after updating, perform the updating
procedure again from the beginning again.
●Initializing the back-up IC
(EEPROM: IC22 on DIGITAL P.C.B.)
After updating the firmware, the back-up IC MUST
be initialized by the following procedure to store the
setting information (soundfield parameters, system
memory and tuner presetting, etc.) properly.
Start up the self-diagnostic function and select “S3.
FACTORY PRESET” menu. (See “SELF-DIAGNOSTIC
FUNCTION”)
Select “PRESET RSRV”, press the “ ” (Power) key to
turn off the power once and turn on the power again.
Then the back-up IC is initialized.
●Required Tools
• USB storage device
• Firmware
RX-V573/HTR-5065: R0305-xxxx.bin
●Preparation
1. Download the latest firmware from the specified
download source to the folder of the PC.
2. Copy the latest firmware from the PC to the root
folder of the USB storage device.
Note) When the latest firmware is copied to a sub-
folder of the USB storage device, the update
will not proceed.
■UPDATING FIRMWARE / ファームウェアのアップデート
下記の部品を交換した場合、ファームウェアを最新バー
ジョンにアップデートする必要があります。
DIGITALP.C.B.
DIGITALP.C.B. の IC2
DIGITALP.C.B. の IC43
DIGITALP.C.B. の IC953
● ファームウェアのバージョンとチェックサムの
確認
ファームウェアのアップデートの前後に、ファーム
ウェアのバージョンとチェックサムをダイアグで確
認します。
ダイアグを起動し、“S4.ROMVERSION/CHECKSUM”
メニューを選択します。
サブメニューでファームウェアのバージョンと
チェックサムを表示し、それらを書きとめます。
（「ダイアグ」参照）
※ アップデート後、ファームウェアのバージョンが
書き込まれたものと異なる場合、アップデートの
操作を最初からやり直してください。
● バックアップ IC の初期化
（EEPROM：DIGITALP.C.B. の IC22）
本機のダイアグを起動し、“S3.FACTORYPRESET” メ
ニューを選択します。
（「ダイアグ」参照）
“PRESETRSRV” を選択し、“ ”（電源）キーを押して
電源を一度きってから、もう一度電源を入れるとバッ
クアップ IC が初期化されます。
● 必要なツール
・ USB フラッシュメモリー
・ ファームウェア
RX-V573： R0305-xxxx.bin
● 準備
1. 指定のダウンロード先から、最新のファームウェ
アを PC のフォルダへダウンロードしてください。
2. PC から USB フラッシュメモリーのルートフォル
ダへ最新のファームウェアをコピーします。
注意）最新のファームウェアをサブフォルダにコピー
した場合、書き込みはできません。
ファームウェアのアップデート後、設定情報（音
場プログラムのパラメーターやシステムメモリー、
チューナープリセット等）を正常に保存するために、
下記の方法でバックアップ IC を初期化する必要が
あります。
19
RX-V573/HTR-5065
RX-V573/HTR-5065

Fig. 1
Fig. 2
Fig. 3
●Operation Procedures
1. Insert the USB storage device to the USB jack.
(Fig. 1)
2. While pressing the “INFO” key, connect the power
cable to the AC outlet. (Fig. 1)
3. The USB UPDATE mode is activated and “USB
Update” is displayed. Writing of the firmware
starts automatically. (Fig. 2)
Writing is started. / 書き込み開始
Writing is completed. / 書き込み完了
Writing being executed. / 書き込み中
4. When writing of the firmware is completed,
“UPDATE SUCCESS”, “PLEASE...” and “POWER
OFF!” are displayed repeatedly. (Fig. 3)
5. Press the “ ” (Power) key to turn off the power.
(Fig. 1)
6. Remove the USB storage device from the USB
jack. (Fig. 1)
7. Start up the self-diagnostic function and check
that the firmware version and checksum are
the same as written ones. (See “Confirmation of
firmware version and checksum”)
● 操作手順
1. USB 端子に USB フラッシュメモリーを差し込みま
す。（Fig.1）
2. “INFO” キーを押しながら、電源コードを AC コン
セントに接続します。（Fig.1）
3. USBUPDATE モードが起動し、“USBUpdate” が表
示されて、ファームウェアの書き込みが自動的に
開始されます。（Fig.2）
4. ファームウェアの書き込み完了後、“UPDATE
SUCCESS”、“PLEASE...”、“POWEROFF!” が繰り返
し表示されます。（Fig.3）
5. “ ”（電源）キーを押して電源を切ります。（Fig.1）
6. USB 端子から USB フラッシュメモリーを抜きま
す。（Fig.1）
7. ダイアグを起動し、ファームウェアのバージョン
とチェックサムが、書き込まれたものと同じであ
ることを確認します。（“ファームウェアのバージョ
ンとチェックサムの確認” 参照）
USBUpdate
UPDATESUCCESS
VERIFYING...
PLEASE...
Sx-x:xx%
POWEROFF!
USB jack
USB 端子
" " (Power) key
""（電源）キー
USB storage device
USB フラッシュメモリー
"INFO" key
“INFO” キー
20
RX-V573/HTR-5065
RX-V573/HTR-5065