Yamaha Clavinova CLP- 725 User manual

EN
MIDI Reference CLP-725
Table of Contents
MIDI Functions ....................................................................................2
MIDI Transmit/Receive Channel Selection ....................................................................2
Local Control ON/OFF ..................................................................................................2
Program Change ON/OFF ............................................................................................3
Control Change ON/OFF ..............................................................................................3
Changing Song Playback Channels..............................................................................3
MIDI Data Format ................................................................................4
MIDI Implementation Chart .............................................................. 10

CLP-725 MIDI Reference 2
MIDI Functions
When this instrument and a computer are connected with a USB cable, MIDI communication can be performed. The
explanations here cover the settings necessary for performing MIDI communication between both devices.
For instructions on how to connect this instrument to the computer, refer to the “Computer-related Operations”
downloadable from the Yamaha Downloads website.
MIDI transmission channels
in Dual
Voice 1 data is transmitted on
the channel set up here.
Voice 2 data is transmitted on
the next greater channel
number relative to the specified
channel.
MIDI receive channel = ALL:
This allows simultaneous
reception of different parts on
all 16 MIDI channels. When
SMF Song data is played back
on a computer with the Voice of
this instrument, this setting is
selected. However, when a
Voice not available on the
instrument is specified, the
playback sound may not be
suitable.
MIDI receive channel = 1+2:
This allows simultaneous
reception on channels 1 and 2
only. When SMF Song data is
played back on a computer,
this setting is selected for
playing back only data of
channels 1 – 2 on this
instrument.
Panel settings (Voices, etc.) of
this instrument will not be
affected by MIDI messages
received from a computer.
Data for the Demo Songs and
Preset Songs cannot be
transmitted via MIDI.
In order to perform MIDI communication between this instrument and a computer, it is
necessary to match the corresponding MIDI transmit and receive channels. By setting the
MIDI transmit channels on this instrument, the setting of the keyboard or pedal performance
or the program change can be transmitted over the channel number corresponding to a
specified channel on the computer. By properly setting the MIDI receive channels on this
instrument, only data of the specified channel will be played back in the MIDI data received
from the computer.
Setting the MIDI Transmit Channel
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C4 – D#4keys.
Default setting: Ch 1
Setting range: Ch 1 – 16, off
Setting the MIDI Receive Channel
While holding down [DEMO/SONG] and [PIANO/VOICE], press the F4 – A4 keys.
Default setting: ALL
Setting range: Ch 1 – 16, 1+2, ALL
“Local Control” refers to the fact that, normally, the keyboard of the instrument controls its internal tone generator,
allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal
tone generator is controlled locally by its own keyboard. Local Control can be turned off as desired, so that the keyboard
of the instrument does not play the internal voices.
Default setting: ON
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C5 key. Pressing the
C5 key repeatedly toggles between Local Control On and Off.
MIDI Transmit/Receive Channel Selection
Highest key
C4 (1 step down) A4 (ALL)
C#4 (Ch 1)
F#4 (Ch 1)
G#4 (Ch 1+2)
D#4 (Off)
D4 (1 step up)
F4 (1 step down)
G4 (1 step up)
MIDI Transmit Channel MIDI Receive Channel
Local Control ON/OFF
C5 Highest key

CLP-725 MIDI Reference 3
MIDI Functions
The information related to Voice changes is called “program change” in MIDI. Sending and receiving program change
messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive
parameters are set to ON, Voice change information in this instrument can be transmitted to or received from a computer.
(However, the Voice as played from the keyboard is maintained and does not change.)
For information on program
change numbers for each of
the Voices of the instrument,
refer to page 4.
Default setting: ON
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C#5 key. Pressing
the C#5 key repeatedly toggles between Local Control On and Off.
Information related to non-note expressive changes, such as the use of a sustain pedal, is called “control change” in
MIDI. Sending and receiving control change messages can be enabled or disabled as desired on this instrument. For
example, if the relevant transmit and receive parameters are set to ON, pedal performance information on this instrument
can be transmitted to or received from a computer. (However, the performance of pedals and other controls as played
from the instrument is maintained and does not change.)
For information on control
changes that can be used with
the instrument, refer to page 5.
Default setting: ON
While holding down [DEMO/SONG] and [PIANO/VOICE], press the D5 key. Pressing the
D5 key repeatedly toggles between Local Control On and Off.
Try this operation when playback of Songs loaded from the computer produces an unexpected or unnatural sound.
To set Song Playback Channels to “1+2”:
While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press the C7
key.
With this operation, the Song data of only channels 1 and 2 will be played back. When
Voices incompatible with this instrument are assigned to channels 3 – 16 and the Piano
parts are assigned to the channels 1 and 2, this operation results in the proper or
expected sound.
To set Song Playback Channels to “ALL”:
While holding down [DEMO/SONG] and the [PIANO/VOICE] simultaneously, press the
B6 key.
With this operation, the Song data of all channels will be played back.
Program Change ON/OFF
C#5
Highest key (C7)
Control Change ON/OFF
D5 Highest key
Changing Song Playback Channels
B6 (ALL)
C7 (1+2)
Highest key

CLP-725 MIDI Reference 4
MIDI Data Format
Preset Voice List
Effect Type List
Reverb Type
Chorus Type
DSP Type
Voice Name MSB
(0-127)
LSB
(0-127)
Program Change #
(1-128)
CFX Grand 108 0 1
Binaural CFX Grand 108 100 1
Bösendorfer 108 6 1
Pop Grand 108 1 2
Stage E.Piano 108 0 5
DX E.Piano 108 0 6
Harpsichord 108 0 7
Vibraphone 108 0 12
Pipe Organ 108 1 20
Jazz Organ 108 0 17
Strings 108 0 49
Effect Name MSB LSB
Off 0 0
Recital Hall 1 24
Concert Hall 1 4
Chamber 2 24
Club 3 24
Effect Name MSB LSB
Off 0 0
Chorus 65 8
Phaser 72 17
Tremolo 119 0
Rotary 66 18
Effect Name MSB LSB
Off 64 0
DelayLCR 5 16
DelayLR 6 0
Echo 7 0
CrossDelay 8 0
Symphonic 68 16
Rotary 69 32
Tremo lo 7 0 18
VibeRotor 119 0
AutoPan 71 21
Phaser 72 16
AutoWah 78 16
Distortion 97 33

CLP-725 MIDI Reference 5
MIDI Data Format
MIDI CHANNEL MESSAGE
Application Range MIDI, Internal Sequencer
MIDI Events
Status byte 1st Data byte 2nd Data byte
MIDI
Formats
MIDI
Reception
MIDI
Transmission
Status Data (Hex) Parameter Data (Hex) Parameter Song
Main
Layer
Left
Panel Song
Key Off 8nH (n: Channel Number) kk Key no. (0-127) vv Velocity (0-127) [GM1]
[GM2]
Key On 9nH (n: Channel Number) kk Key no. (0-127) vv Key On: vv=1-127
Key Off: vv=0
[GM1]
[GM2]
Control Change BnH 0 (00H) Bank Select MSB 0-127 (00H...7FH) (00) Normal [GM2]
1 (01H) Modulation 0-127 (00H...7FH) Data [GM1]
[GM2]
5 (05H) Portamento Time 0-127 (00H...7FH) Data [GM2]
6 (06H) Data Entry MSB 0-127 (00H...7FH) Data [GM2]
7 (07H) Main Volume 0-127 (00H...7FH) Data [GM1]
[GM2]
10 (0AH) Panpot 0-127 (00H...7FH) L64...C...R63 [GM1]
[GM2]
11 (0BH) Expression 0-127 (00H...7FH) Data [GM1]
[GM2]
19 (13H) Key Acceleration 0-127 (00H...7FH) Key Acceleration
(0-127)
32 (20H) Bank Select LSB 0-127 (00H...7FH) Data [GM2]
38 (26H) Data Entry LSB 0-127 (00H...7FH) Data [GM2]
64 (40H) Sustain (Damper) 0-127 (00H...7FH) Data [GM1]
[GM2]
65 (41H) Portamento 0-127 (00H...7FH) 0...63, 64...127
(OFF, ON)
[GM2]
66 (42H) Sostenuto 0-127 (00H...7FH) 0...63, 64...127
(OFF, ON)
[GM2]
67 (43H) Soft Pedal 0-127 (00H...7FH) 0...63, 64...127
(OFF, ON)
[GM2]
71 (47H) Harmonic Content 0-127 (00H...7FH) -64...0...+63 [GM2]
72 (48H) Release Time 0-127 (00H...7FH) -64...0...+63 [GM2]
73 (49H) Attack Time 0-127 (00H...7FH) -64...0...+63 [GM2]
74 (4AH) Brightness 0-127 (00H...7FH) -64...0...+63 [GM2]
75 (4BH) Decay Time 0-127 (00H...7FH) -64...0...+63 [GM2]
76 (4CH) Vibrate Rate 0-127 (00H...7FH) -64...0...+63 [GM2]
77 (4DH) Vibrate Depth 0-127 (00H...7FH) -64...0...+63 [GM2]
78 (4EH) Vibrate Delay 0-127 (00H...7FH) -64...0...+63 [GM2]
84 (54H) Portamento Control 0-127 (00H...7FH) Key no. (0-127)
88 (58H) High-Res Velocity
Prefix
0-127 (00H...8FH) Velocity (0-127)
91 (5BH) Effect1 Depth
(Reverb Send Level)
0-127 (00H...7FH) Data [GM2]
93 (5DH) Effect3 Depth
(Chorus Send Level)
0-127 (00H...7FH) Data [GM2]
94 (5EH) Effect4 Depth
(Variation Send Level)
0-127 (00H...7FH) Data
96 (60H) RPN Increment – – The data byte is
ignored.
97 (61H) RPN Decrement – – The data byte is
ignored.
98 (62H) NRPN LSB 0-127 (00H...7FH) Data
99 (63H) NRPN MSB 0-127 (00H...7FH) Data
100 (64H) RPN LSB 0-127 (00H...7FH) Data [GM2]
101 (65H) RPN MSB 0-127 (00H...7FH) Data [GM2]
Mode Message BnH (n: Channel Number) 120 (78H) All Sound Off 0 (00H) Data [GM2]
121 (79H) Reset All Controllers 0 (00H) Data [GM1]
[GM2]
122 (7AH) Local Control 0
127
(00H)
(7FH)
OFF
ON
123 (7BH) All Note Off 0 (00H) Data [GM1]
[GM2]
124 (7CH) Omni Off 0 (00H) Data [GM2]
125 (7DH) Omni On 0 (00H) Data [GM2]
126 (7EH) Mono 0-16 (00H...10H) Data [GM2]
127 (7FH) Poly 0 (00H) Data [GM2]
Program Change CnH (n: Channel Number) pp (00H...7FH) Voice number (0-127) – – – [GM1]
[GM2]
Channel After Touch DnH (n: Channel Number) vv (00H...7FH) Data – – – [GM1]
[GM2]
Polyphonic After
Touch
AnH (n: Channel Number) kk (00H...7FH) Key no. (0-127) vv (00H...7FH) Data
Pitch Bend Change EnH (n: Channel Number) cc (00H...7FH) LSB dd (00H...7FH) MSB [GM1]
[GM2]
Realtime Message F8H MIDI Clock – – – –
FAH Start – – – –
FBH Continue – – – –
FCH Stop – – – –
FEH Active Sens – – – – [GM2]
FFH System Reset – – – –

CLP-725 MIDI Reference 6
MIDI Data Format
Parameters controlled by RPN (Registered Parameter Numbers)
NRPN Data Entry
Parameter Data Range MIDI
Formats
MIDI Reception
(respond/ignored)
MIDI Transmission
(generated data)
MSB LSB MSB LSB Song
Main
Layer
Left
Panel Song
00H 00H mmH – Pitch Bend Sensitivity mm: 00H-18H (0...+24 [semitones]) [GM1]
[GM2]
00H 01H mmH llH Fine Tune mm ll: 00H 00H -100 [cent]
...
mm ll: 40H 00H 0 [cent]
...
mm ll: 7FH 7FH 100 [cent]
[GM1]
[GM2]
00H 02H mmH – Coarse Tune mm: 28H-40H-58H (-24...0...+24 [semitones]) [GM1]
[GM2]
00H 05H mmH llH Modulation Sensitivity mm: Specified in semitone steps
ll: Specified in 100/128 cent steps
[GM2]
7FH 7FH – – Null – [GM2]

CLP-725 MIDI Reference 7
MIDI Data Format
MIDI PARAMETER CHANGE TABLE
*Not received when Receive Parameter SysEx is set to off.
*Not transmitted when Transmit Parameter SysEx is set to off.
MIDI Parameter Change Table (XG SYSTEM)
MIDI Parameter Change Table (EFFECT1)
MIDI Parameter Change Table (EFFECT2)
*The EFFECT2 Parameter cannot be reset to its factory setting with XG SYSTEM ON.
The second byte of the address is considered as an Insertion effect number.
n: insertion effect number
The Insertion Effect No. range is from 0 to 1. Values outside the range are handled as unknown and ignored.
Application Range MIDI, Internal Sequencer
Address
(H)
Size
(H) Data (H) Parameter Description XG Default
(H)
MIDI Reception MIDI Transmission
Song
Main
Layer
Left
Panel Song
00 00 00 4 00-0F
00-0F
00-0F
00-0F
MASTER TUNE -102.4...0...+102.3 [cent]
1st bit3-0bit15-12
2nd bit3-0bit11-8
3rd bit3-0bit7-4
4th bit3-0bit3-0
*Panel setting value
04 1 00-7F MASTER VOLUME 0...127 7F
05 1 00-7F MASTER ATTENUATOR 0...127 00
06 1 28-58 TRANSPOSE -24...0...+24 [semitones] 40
7E 1 00 XG SYSTEM ON 00=XG system ON –
7F 1 00 ALL PARAMETER RESET 00=ON –
Address
(H)
Size
(H) Data (H) Parameter Description XG Default
(H)
MIDI Reception MIDI Transmission
Song
Main
Layer
Left
Panel Song
02 01 00 2 00-7F
00-7F
REVERB TYPE MSB
REVERB TYPE LSB
Refer to Effect Type List
〃
01 (=HALL1)
00
0C 1 00-7F REVERB RETURN -∞dB...0dB...+6dB (0...64...127) 40
0D 1 01-7F REVERB PAN L63...C...R63 40
20 2 00-7F
00-7F
CHORUS TYPE MSB
CHORUS TYPE LSB
Refer to Effect Type List
〃
41 (=CHORUS1)
00
2C 1 00-7F CHORUS RETURN -∞dB...0dB...+6dB (0...64...127) 40
2D 1 01-7F CHORUS PAN L63...C...R63 40
2E 1 00-7F SEND CHORUS TO REVERB -∞dB...0dB...+6dB (0...64...127) 00
40 2 00-7F
00-7F
VARIATION TYPE MSB
VARIATION TYPE LSB
Refer to Effect Type List
〃
05 (=DELAY L, C, R)
00
56 1 00-7F VARIATION RETURN -∞dB...0dB...+6dB (0...64...127) 40
57 1 01-7F VARIATION PAN L63...C...R63 40
58 1 00-7F SEND VARIATION TO REVERB -∞dB...0dB...+6dB (0...64...127) 00
59 1 00-7F SEND VARIATION TO CHORUS -∞dB...0dB...+6dB (0...64...127) 00
5A 1 00-01 VARIATION CONNECTION INSERTION, SYSTEM 00
5B 1 00-7F VARIATION PART NUMBER Reception: Part1...16 (0...15)
Transmission: Part1...16 (0...15)
AD (64)
OFF (127)
7F
5C 1 00-7F MW VARIATION CONTROL DEPTH -64...0...+63 40
5D 1 00-7F BEND VARIATION CONTROL DEPTH -64...0...+63 40
5E 1 00-7F CAT VARIATION CONTROL DEPTH -64...0...+63 40
5F 1 00-7F AC1 VARIATION CONTROL DEPTH -64...0...+63 40
60 1 00-7F AC2 VARIATION CONTROL DEPTH -64...0...+63 40
Address
(H)
Size
(H)
Data
(H) Parameter Description
MIDI Reception MIDI Transmission
Song
Main
Layer
Left
Panel Song
03n002 00-7F
00-7F
INSERTION EFFECT TYPE MSB
INSERTION EFFECT TYPE LSB
Refer to Effect Type List
〃
0C 1 00-7F INSERTION EFFECT PART NUMBER Reception: Part1...16 (0...15)
Transmission: Part1...16 (0...15)
AD (64)
OFF (127)
0D 1 00-7F MW INSERTION CONTROL DEPTH -64...0...+63
0E 1 00-7F BEND INSERTION CONTROL DEPTH -64...0...+63
0F 1 00-7F CAT INSERTION CONTROL DEPTH -64...0...+63
10 1 00-7F AC1 INSERTION CONTROL DEPTH -64...0...+63
11 1 00-7F AC2 INSERTION CONTROL DEPTH -64...0...+63

CLP-725 MIDI Reference 8
MIDI Data Format
MIDI Parameter Change Table (MULTI PART)
Address
(H)
Size
(H)
Data
(H) Parameter Description XG Default
(H)
MIDI Reception MIDI Transmission
Song
Main
Layer
Left
Panel Song
08 nn 07 1 00-03 PART MODE NORMAL, DRUM, DRUMS1...2 part 10=02,
other parts=00
0C 1 00-7F VELOCITY SENSE DEPTH 0...127 40
0D 1 00-7F VELOCITY SENSE OFFSET 0...127 40
41 1 00-7F SCALE TUNING C -63...0...+63 [cent] 40
42 1 00-7F SCALE TUNING C# -63...0...+63 [cent] 40
43 1 00-7F SCALE TUNING D -63...0...+63 [cent] 40
44 1 00-7F SCALE TUNING D# -63...0...+63 [cent] 40
45 1 00-7F SCALE TUNING E -63...0...+63 [cent] 40
46 1 00-7F SCALE TUNING F -63...0...+63 [cent] 40
47 1 00-7F SCALE TUNING F# -63...0...+63 [cent] 40
48 1 00-7F SCALE TUNING G -63...0...+63 [cent] 40
49 1 00-7F SCALE TUNING G# -63...0...+63 [cent] 40
4A 1 00-7F SCALE TUNING A -63...0...+63 [cent] 40
4B 1 00-7F SCALE TUNING A# -63...0...+63 [cent] 40
4C 1 00-7F SCALE TUNING B -63...0...+63 [cent] 40
59 1 00-5F AC1 CONTROLLER NUMBER 0...95 10

CLP-725 MIDI Reference 9
MIDI Data Format
System Exclusive Messages
*Not received when Receive Parameter SysEx is set to off.
*Not transmitted when Transmit Parameter SysEx is set to off.
System Exclusive Messages (XG)
System Exclusive Messages (Others)
System Exclusive Messages (Preset Voice)
*For each Depth value, the reset value is 40H = Voice parameter
Application Range MIDI, Internal Sequencer
MIDI Event Data Format
MIDI Reception MIDI Transmission
Song
Main
Layer
Left
Panel Song
XG Parameter Change F0 43 1n 4C hh mm ll dd ... F7
11110000 F0 = Exclusive status
01000011 43 = YAMAHA ID
0001nnnn 1n = Device Number n=always 0 (when transmit), n=0-F (when receive)
01001100 4C = Model ID
0hhhhhhh hh = Address High
0mmmmmmm mm= Address Mid
0lllllll ll = Address Low
0ddddddd dd = Data
... ...
11110111 F7 = End of Exclusive
*Refer to
Parameter Change
Tab le .
*Refer to Parameter Change
Tab le .
XG Bulk Dump F0 43 0n 4C aa bb hh mm ll dd ... dd cc F7
11110000 F0 = Exclusive status
01000011 43 = YAMAHA ID
0000nnnn 0n = Device Number n=always 0 (when transmit), n=0-F (when receive)
01001100 4C = Model ID
0aaaaaaa aa = Byte Count MSB
0bbbbbbb bb = Byte Count LSB
0hhhhhhh hh = Address High
0mmmmmmm mm= Address Mid
0lllllll ll = Address Low
0ddddddd dd = Data
: :
0ddddddd dd = Data
0ccccccc cc = Checksum
11110111 F7 = End of Exclusive
*Refer to
Parameter Change
Tab le .
*Refer to Parameter Change
Tab le .
XG Parameter
Request
F0 43 3n 4C hh mm ll F7
11110000 F0 = Exclusive status
01000011 43 = YAMAHA ID
0011nnnn 3n = Device Number n=always 0 (when transmit), n=0-F (when receive)
01001100 4C = Model ID
0hhhhhhh hh = Address High
0mmmmmmm mm= Address Mid
0lllllll ll = Address Low
11110111 F7 = End of Exclusive
*Refer to
Parameter Change
Tab le .
(However, the
request for
address
“0A nn 4v” will be
ignored.)
XG Dump Request F0 43 2n 4C hh mm ll F7
11110000 F0 = Exclusive status
01000011 43 = YAMAHA ID
0010nnnn 2n = Device Number n=always 0 (when transmit), n=0-F (when receive)
01001100 4C = Model ID
0hhhhhhh hh = Address High
0mmmmmmm mm= Address Mid
0lllllll ll = Address Low
11110111 F7 = End of Exclusive
*Refer to
Parameter Change
Tab le .
(However, the
request for
address
“0A nn 40” will be
ignored.)
MIDI Event Data Format
MIDI Reception
(effective or not for each part)
MIDI Transmission
(generated data)
Song
Main
Layer
Left
Panel Song
MIDI Master Tuning F0 43 1n 27 30 00 00 0m 0l cc F7
11110000 F0 = Exclusive status
01000011 43 = YAMAHA ID
0001nnnn 1n n= always 0 (when transmit), n=0-F (when receive)
00100111 27 = Model ID of TG100
00110000 30 = Address High
00000000 00 = Address Mid
00000000 00 = Address Low
0000mmmm 0m = Master Tune MSB
0000llll 0l = Master Tune LSB
0ccccccc cc = don't care
11110111 F7 = End of Exclusive
MIDI Event Data Format
MIDI Reception
(effective or not for each part)
MIDI Transmission
(generated data)
Song
Main
Layer
Left
Panel Song
Key Off Sampling
Depth
F0 43 73 01 50 11 0n 04 dd F7
11110000 F0 = Exclusive status
01000011 43 = YAMAHA ID
01110011 73 = Clavinova ID
00000001 01 = Model ID (Clavinova common ID)
01010000 50 = Sub-ID
00010001 11 = Sub-ID
0000nnnn 0n = Channel (00-0F)
00000100 04 = Sub-ID (Key Off Sampling Depth)
0ddddddd dd = Depth (00-50)
11110111 F7 = End of Exclusive
Soft Pedal Depth F0 43 73 01 50 11 0n 05 dd F7
11110000 F0 = Exclusive status
01000011 43 = YAMAHA ID
01110011 73 = Clavinova ID
00000001 01 = Model ID (Clavinova common ID)
01010000 50 = Sub-ID
00010001 11 = Sub-ID
0000nnnn 0n = Channel (00-0F)
00000101 05 = Sub-ID (Soft Pedal Depth)
0ddddddd dd = Depth (00-7F)
11110111 F7 = End of Exclusive

MIDI Implementation Chart
TransmittedFunction... Recognized Remarks
Basic
Channel
Note
Number : True voice
Velocity
After
Touch
Pitch Bend
Control
Change
Prog
Change : True #
System Exclusive
: Song Pos.
Common : Song Sel.
: Tune
System : Clock
Real Time: Commands
: All Sound Off
Aux : Reset All Cntrls
: Local ON/OFF
Mes- : All Notes OFF
sages: Active Sense
: Reset
Notes:
Mode
Default
Changed
Note ON
Note OFF
Key's
Ch's
0,32
1,5,11
7,10
19
6,38
64,66,67
65
71-74
84
88
91,93
96-97
98-99
100-101
1
9nH,v=1-127
8nH,v=64
*2
*2
*2
*2
*2
*2
*2
0 - 127
**************
3
**************
0 - 127
**************
Mode 1 : OMNI ON , POLY Mode 2 : OMNI ON ,MONO
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF,MONO
1 - 16
9nH,v=1-127
9nH,v=0 or 8nH
0 - 24 semi *1
(120,126,127)
(121)
(122)
(123-125)
3
0 - 127
0 - 127
: Yes
: No
Default
Messages
Altered
Yamaha [ Clavinova ]
Model CLP-725 MIDI Implementation Chart Version : 1.0
Bank Select
Key Acceleration
Data Entry
Pedal
Portamento
Sound Controller
High-Res Velocity Prefix
Effect Depth
RPN Inc,Dec
NRPN LSB,MSB
RPN LSB,MSB
0 - 127
0,1,4,5,6,11,16,19,48
*1 For some Voices, the pitch may not be changed according to the
pitch bend setting range.
*2 These Control Change messages cannot be transmitted by panel
operations, but can be transmitted by Song playback data.
Manual Development Group
©2020 Yamaha Corporation
Published 02/2020 MW-A0
Table of contents
Other Yamaha Synthesizer manuals

Yamaha
Yamaha DX100 Operating instructions

Yamaha
Yamaha SY-35 User manual

Yamaha
Yamaha PF-70 User manual

Yamaha
Yamaha DX7 II FD Owner's manual

Yamaha
Yamaha Loopfactory DX200 User manual

Yamaha
Yamaha V50 User manual

Yamaha
Yamaha Electone HS User manual

Yamaha
Yamaha ME-100FS User manual

Yamaha
Yamaha EOS B900 User manual

Yamaha
Yamaha CS-30 User manual

Yamaha
Yamaha S90 Instruction Manual

Yamaha
Yamaha DX9 User manual

Yamaha
Yamaha SY.22 User manual

Yamaha
Yamaha JOGR JOGRR CS50 User manual

Yamaha
Yamaha MOTIF6 Voice Editor Use and care manual

Yamaha
Yamaha P-140 User manual

Yamaha
Yamaha DX9 User manual

Yamaha
Yamaha W5 User guide

Yamaha
Yamaha MX61 User manual

Yamaha
Yamaha FB-01 User manual