YANKON MTSL1011 series User manual

ZHEJIANG YANKON GROUP CO LTD
Address: Tongjiang Middle Road, Shangyu Economic Development Zone, Zhejiang Province,
China
LED Desk User Manual
This manual applied Model No.: MTSL1011XX (XX represents the color of
the enclosure which can be used in two words. For example, HR means
red for H represents Hong and R represents Red.)
The product is a LED desk with QI wireless charging function.
The wireless charging module can transmit 5W of charging power for a
low-power wireless charging receiving device.
Operating frequency: 110kHz~205kHz
Input voltage: DC9V via adapter
MAX output voltage: 5V 1A
AC Power Supply
Input voltage: AC 100-240V, 50/60Hz ,0.22 A
Output voltage: DC 9V

Statement：
This device complies with Part 18 of the FCC Rule
1.Caution statement:
Modifications not approved by the party responsible for compliance
could void user’s authority to operate the equipment.
2.Instruction statement:
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and the receiver.
*Connect the equipment into an outlet on a circuit different from that to
which the receiver connected.
*Consult the dealer or an experienced radio/TV technician for help.